Isbn: 9786139474240 - grain size stabilization of fe and fe-ni nanostructures (3 Ergebnisse)

ISBN
Mit der Detailsuche verfeinern

Optimieren Sie Ihre Suche

  • Bücher (3)

bis

Benutzerdefinierte Preisspanne (EUR)

bis

  • Sprache: Englisch

    Verlag: LAP LAMBERT Academic Publishing, 2019

    6139474248 / 9786139474240

    • Softcover

    Anbieter: preigu, Osnabrück, Deutschlandpreigu

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Neu

    EUR 36,35

    EUR 70,00 Versand 
    Versand von Deutschland nach USA

    Anzahl: 5 verfügbar

    Taschenbuch. Zustand: Neu. Grain Size Stabilization of Fe and Fe-Ni nanostructures | Debasis Nayak | Taschenbuch | 76 S. | Englisch | 2019 | LAP LAMBERT Academic Publishing | EAN 9786139474240 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu.

  • Sprache: Englisch

    Verlag: LAP LAMBERT Academic Publishing, 2019

    6139474248 / 9786139474240

    • Softcover

    Anbieter: Buchpark, Trebbin, DeutschlandBuchpark

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Gebraucht - Sehr gut

    EUR 32,16

    EUR 105,00 Versand 
    Versand von Deutschland nach USA

    Anzahl: 3 verfügbar

    Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | The mechanical alloying (MA) technique has been used to prepare nanocrystalline Fe, Fe-5wt. %Ni, 7 wt. % Ni and 10 wt. % Ni alloys from elemental powder mixtures. Fe-5wt. %Ni and Fe-7 wt. % Ni were detected to form complete solid solution after MA for 1500 min. as per the X-ray diffraction (XRD) analysis. Out these two solid solutions, Fe-7 wt. % Ni alloy was chosen to investigate its grain size stabilization by addition of minute amount of yttrium. Fe is also stabilized by yttrium. All the alloys were annealed at different temperatures up to 1200ºC under high purity argon atmosphere. XRD analysis and microhardness measurement were carried out for all the specimens to analyze their stability after annealing. Crystallite size was calculated by using Scherer formula and the value of the as-milled sample was below 15 nm. The experiment showed yttrium stabilizes Fe and Fe-Ni grain size at higher temperature in nano range. Annealing decreases lattice strain for annealing temperature below 900°C but it suddenly increases while annealing at higher temperature for ball milled Fe.

  • Sprache: Englisch

    Verlag: LAP LAMBERT Academic Publishing, 2019

    6139474248 / 9786139474240

    • Softcover

    Anbieter: Buchpark, Trebbin, DeutschlandBuchpark

    Verkäufer/-in mit 5 Sternen
    Verkäufer/-in kontaktieren

    Zustand: Gebraucht

    EUR 33,12

    EUR 105,00 Versand 
    Versand von Deutschland nach USA

    Anzahl: 1 verfügbar

    Zustand: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | The mechanical alloying (MA) technique has been used to prepare nanocrystalline Fe, Fe-5wt. %Ni, 7 wt. % Ni and 10 wt. % Ni alloys from elemental powder mixtures. Fe-5wt. %Ni and Fe-7 wt. % Ni were detected to form complete solid solution after MA for 1500 min. as per the X-ray diffraction (XRD) analysis. Out these two solid solutions, Fe-7 wt. % Ni alloy was chosen to investigate its grain size stabilization by addition of minute amount of yttrium. Fe is also stabilized by yttrium. All the alloys were annealed at different temperatures up to 1200ºC under high purity argon atmosphere. XRD analysis and microhardness measurement were carried out for all the specimens to analyze their stability after annealing. Crystallite size was calculated by using Scherer formula and the value of the as-milled sample was below 15 nm. The experiment showed yttrium stabilizes Fe and Fe-Ni grain size at higher temperature in nano range. Annealing decreases lattice strain for annealing temperature below 900°C but it suddenly increases while annealing at higher temperature for ball milled Fe.