ISBN: 9780444988218 - digital control of electric drives (volume 43) (studies in electrical and electronic engineering, volume 43) (9 Ergebnisse)

- Hardcover
Anbieter: killarneybooks, Inagh, CLARE, Irlandkillarneybooks
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Befriedigend
EUR 49,50
EUR 33,70 VersandVersand von Irland nach USAAnzahl: 1 verfügbar
Hardcover. Zustand: Good. Hardcover, viii + 206 pages, NOT ex-library. Revised and enlarged translation from the Polish original. Pages are clean, bright, untanned, with unmarked text, free of inscriptions and stamps. Outer page edges affected by age-spotting and faint staining. Sunned spine, scuff-marks on the boards. Issued without a dust jacket. -- The electromechanical systems employed in different branches of industry are utilized most often as drives of working machines which must be fed with electric energy in a continuous, periodic or even discrete way. Some of these machines operate at constant speed, others require wide and varying energy control. In many designs the synchronous cooperation of several electric drives is required in addition to the desired dynamic properties. For these reasons the control of the cooperation and dynamics of electromechanical systems requires the use of computers. This book adopts an unusual approach to the subject in that it treats the electric drive system on the one hand as an element of a control system and on the other as an element of a complex automatic system. These two trends in the development of the automatic control of electric drives have resulted in a volume that provides a thorough overview on the variety of different approaches to the design of control systems. --- Contents: 1. Introduction [General Characteristics of Model of Electric Drive and Control Systems; General Remarks on Control by Means of Microprocessors]; 2. Signal Processing [Sampling of Continuous Signals; Analogue and Digital Filters; Quantization of Signals; A/D and D/A Converters; Systems for Connecting Microcomputers with Peripheral Equipment]; 3. Digital Control Algorithms [General Problems; Digital Algorithms of the PID Class; Controller with Definite Setting Time; Other Algorithms of Digital Control]; 4. Computer-Aided Design of the Digital Control of Electric Drives [General Principles; Principles of the Simulation of Digitally Controlled Electric Drive Systems; Principles of Parametric Computer Optimization; Computer Methods of Designing Digital Filters; Discrete Frequency Computer Methods]; 5. The Many-Sided Problems of Electric Drive Controls [Multimachine Electric Drive Systems; Systems, Large-Scale Systems and Complex Systems; A Complex Mathematical Model of a Rolling Mill; Types of Hierarchical Structures; The Organization of a Multiprocessor System; Complex Automatic Systems]; References; Index. …

- Hardcover
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 136,01
EUR 17,98 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New.

- Hardcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 147,43
EUR 13,44 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In English.

- Hardcover
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Wie neu
EUR 148,87
EUR 17,98 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: As New. Unread book in perfect condition.

- Hardcover
Anbieter: Rarewaves.com USA, London, LONDO, Vereinigtes KönigreichRarewaves.com USA
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 170,09
Versand gratisVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Hardback. Zustand: New. The electromechanical systems employed in different branches of industry are utilized most often as drives of working machines which must be fed with electric energy in a continuous, periodic or even discrete way. Some of these machines operate at constant speed, others require wide and varying energy control. In many designs the synchronous cooperation of several electric drives is required in addition to the desired dynamic properties. For these reasons the control of the cooperation and dynamics of electromechanical systems requires the use of computers.This book adopts an unusual approach to the subject in that it treats the electric drive system on the one hand as an element of a control system and on the other as an element of a complex automatic system. These two trends in the development of the automatic control of electric drives have resulted in a volume that provides a thorough overview on the variety of different approaches to the design of control systems.…

- Hardcover
Anbieter: moluna, Greven, Deutschlandmoluna
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 143,03
EUR 48,99 VersandVersand von Deutschland nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. The electromechanical systems employed in different branches of industry are utilized most often as drives of working machines which must be fed with electric energy in a continuous, periodic or even discrete way. Some of these machines operate at constant .

- Hardcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 192,56
EUR 35,00 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Buch. Zustand: Neu. Neuware - The electromechanical systems employed in different branches of industry are utilized most often as drives of working machines which must be fed with electric energy in a continuous, periodic or even discrete way. Some of these machines operate at constant speed, others require wide and varying energy control. In many designs the synchronous cooperation of several electric drives is required in addition to the desired dynamic properties. For these reasons the control of the cooperation and dynamics of electromechanical systems requires the use of computers.This book adopts an unusual approach to the subject in that it treats the electric drive system on the one hand as an element of a control system and on the other as an element of a complex automatic system. These two trends in the development of the automatic control of electric drives have resulted in a volume that provides a thorough overview on the variety of different approaches to the design of control systems.…

- Hardcover
Anbieter: Rarewaves.com UK, London, Vereinigtes KönigreichRarewaves.com UK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 164,78
EUR 77,92 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Hardback. Zustand: New. The electromechanical systems employed in different branches of industry are utilized most often as drives of working machines which must be fed with electric energy in a continuous, periodic or even discrete way. Some of these machines operate at constant speed, others require wide and varying energy control. In many designs the synchronous cooperation of several electric drives is required in addition to the desired dynamic properties. For these reasons the control of the cooperation and dynamics of electromechanical systems requires the use of computers.This book adopts an unusual approach to the subject in that it treats the electric drive system on the one hand as an element of a control system and on the other as an element of a complex automatic system. These two trends in the development of the automatic control of electric drives have resulted in a volume that provides a thorough overview on the variety of different approaches to the design of control systems.…

Verlag: Elsevier
Anbieter: Majestic Books, Hounslow, Vereinigtes KönigreichMajestic Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 99,18
EUR 7,79 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
Zustand: New. pp. 216 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.