ISBN: 9780333647776 - manufacturing management: learning through case studies (12 Ergebnisse)

- Softcover
Anbieter: AwesomeBooks, Wallingford, Vereinigtes KönigreichAwesomeBooks
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Gut
EUR 10,65
EUR 2,37 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Very Good. Manufacturing Management: Learning through Case Studies This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. .…

Sprache: Englisch
Verlag: Macmillan Press, Basingstoke, Hants., United Kingdom, 1998
- Softcover
Anbieter: Victoria Bookshop, BERE ALSTON, DEVON, Vereinigtes KönigreichVictoria Bookshop
Verkäufer/-in kontaktierenVerkäufer/-in mit 3 SternenZustand: Gebraucht - Gut
EUR 7,70
EUR 11,75 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
Paperback. Zustand: Very Good. 8vo. excellent condition- as new with minor shelf wear. Book.

- Softcover
Anbieter: Bahamut Media, Reading, Vereinigtes KönigreichBahamut Media
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Gut
EUR 19,73
EUR 2,97 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.

- Softcover
Anbieter: Rarewaves.com USA, London, LONDO, Vereinigtes KönigreichRarewaves.com USA
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 26,23
Versand gratisVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Paperback. Zustand: New. In engineering management, the important resources of manpower, materials and machines need special attention in order to achieve competitive advantage. In this case study approach, some relevant theory is provided, with an analysis of the strengths and weaknesses for application. The challenge for the reader is to improve the current situation, given the facts that have been identified. All the cases are open-ended, so the actual changes adopted with outcomes obtained are included, thus facilitating comparisons.The cases cover topics such as strategy formulation, management structure, cost estimation, production control and delivery, productivity, assembly line output, investment decisions, management information decisions, quality systems, health and safety aspects, TQM and continuous improvement, measuring and monitoring results.…

- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 27,17
EUR 11,78 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In English.

- Softcover
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 22,80
EUR 17,90 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New.

- Softcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 30,91
EUR 11,93 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
Paperback. Zustand: Brand New. illustrated edition. 204 pages. 9.25x6.25x0.50 inches. In Stock.

- Softcover
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Wie neu
EUR 26,55
EUR 17,90 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: As New. Unread book in perfect condition.

- Softcover
Anbieter: Kennys Bookstore, Olney, MD, USAKennys Bookstore
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 45,63
EUR 9,57 VersandVersand innerhalb von USAAnzahl: Mehr als 20 verfügbar
Zustand: New. Offers an insider's view of changes in industrial operation that should bring about increased performance through the reduction of waste and delay. Each of the ten case studies in the book follows a similar pattern that links theory with practical application. Num Pages: 216 pages, biography. BIC Classification: KJMV5; KND. Category: (UF) Further/Higher Education; (UU) Undergraduate. Dimension: 235 x 155 x 9. Weight in Grams: 339. . 1998. Ill. Paperback. . . . . Books ship from the US and Ireland. …

- Softcover
Anbieter: Kennys Bookshop and Art Galleries Ltd., Galway, GY, IrlandKennys Bookshop and Art Galleries Ltd.
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 49,83
EUR 9,50 VersandVersand von Irland nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. Offers an insider's view of changes in industrial operation that should bring about increased performance through the reduction of waste and delay. Each of the ten case studies in the book follows a similar pattern that links theory with practical application. Num Pages: 216 pages, biography. BIC Classification: KJMV5; KND. Category: (UF) Further/Higher Education; (UU) Undergraduate. Dimension: 235 x 155 x 9. Weight in Grams: 339. . 1998. Ill. Paperback. . . . . …

- Softcover
Anbieter: Home-set, Mannheim, DeutschlandHome-set
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 31,13
EUR 49,90 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Softcover/Taschenbuch. Zustand: Neu. In engineering management, the important resources of manpower, materials and machines need special attention in order to achieve competitive advantage. In this case study approach, some relevant theory is provided, with an analysis of the strengths and weaknesses for application. The challenge for the reader is to improve the current situation, given the facts that have been identified. All the cases are open-ended, so the actual changes adopted with outcomes obtained are included, thus facilitating comparisons. The cases cover topics such as strategy formulation, management structure, cost estimation, production control and delivery, productivity, assembly line output, investment decisions, management information decisions, quality systems, health and safety aspects, TQM and continuous improvement, measuring and monitoring results. Sprache: Englisch Gewicht in Gramm: 336.…

- Softcover
Anbieter: Rarewaves.com UK, London, Vereinigtes KönigreichRarewaves.com UK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 23,56
EUR 77,55 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Paperback. Zustand: New. In engineering management, the important resources of manpower, materials and machines need special attention in order to achieve competitive advantage. In this case study approach, some relevant theory is provided, with an analysis of the strengths and weaknesses for application. The challenge for the reader is to improve the current situation, given the facts that have been identified. All the cases are open-ended, so the actual changes adopted with outcomes obtained are included, thus facilitating comparisons.The cases cover topics such as strategy formulation, management structure, cost estimation, production control and delivery, productivity, assembly line output, investment decisions, management information decisions, quality systems, health and safety aspects, TQM and continuous improvement, measuring and monitoring results.…