xianglin (32 Ergebnisse)

1st ed. 2020. 16 x 24 cm. XXIII, 270 S. XXIII, 270 p. 2 illus., 1 illus. in color. Hardcover Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. (China Academic Library). Sprache: Englisch.

Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Zustand: Good. Paperback, illustrations in colour, text in Chinese, oblong (circa 18x26cm).

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Hardcover. Zustand: Near Fine. Zustand des Schutzumschlags: Near Fine. 1st Edition. 4to hardcover volume near fine in pictorial boards. Dust jacket near fine with very minor rubbing. 159 color pages are in Chinese.

Paperback. Zustand: Brand New. 293 pages. 9.25x6.10x0.62 inches. In Stock.

Hardcover. Zustand: Brand New. 293 pages. 9.25x6.10x0.91 inches. In Stock.

Zustand: New.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Taschenbuch. Zustand: Neu. Neuware -This volume is a selection of Chinese political scholar Xianglin Xüs published works spanning nearly 20 years of research that explore and discuss the socio-economic transition in China under state political reform. Contextualized within the decades following the 80s, the author analyzes patterns observed from empirical studies, and breaks down the underlining reasoning, conditions and functionalities behind the incremental reform policies pushed forward by the Party and government.The collection is broken up into four sections: the first provides a general framework and theoretical / historical introduction to social transition research in the case of China; the second section discusses the underpinning logic behind political reform in China and practical concerns; the third section follows with discussions on reform policy practices within China including application and trajectory; the final section concludes with an analysis of reform within state institutional infrastructure and policy innovation.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 296 pp. Englisch.

Buch. Zustand: Neu. Neuware -This volume is a selection of Chinese political scholar Xianglin Xüs published works spanning nearly 20 years of research that explore and discuss the socio-economic transition in China under state political reform. Contextualized within the decades following the 80s, the author analyzes patterns observed from empirical studies, and breaks down the underlining reasoning, conditions and functionalities behind the incremental reform policies pushed forward by the Party and government.The collection is broken up into four sections: the first provides a general framework and theoretical / historical introduction to social transition research in the case of China; the second section discusses the underpinning logic behind political reform in China and practical concerns; the third section follows with discussions on reform policy practices within China including application and trajectory; the final section concludes with an analysis of reform within state institutional infrastructure and policy innovation.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 296 pp. Englisch.

Taschenbuch. Zustand: Neu. Neuware -Based on the latest version of designing codes both for buildings and bridges (GB50010-2010 and JTG D62-2004), this book starts from steel and concrete materials, whose properties are very important to the mechanical behavior of concrete structural members. Step by step, analysis of reinforced and prestressed concrete members under basic loading types (tension, compression, flexure, shearing and torsion) and environmental actions are introduced. The characteristic of the book that distinguishes it from other textbooks on concrete structures is that more emphasis has been laid on the basic theories of reinforced concrete and the application of the basic theories in design of new structures and analysis of existing structures. Examples and problems in each chapter are carefully designed to cover every important knowledge point. As a basic course for undergraduates majoring in civil engineering, this course is different from either the previously learnt mechanics courses or the design courses to be learnt. Compared with mechanics courses, the basic theories of reinforced concrete structures cannot be solely derived by theoretical analysis. And compared with design courses, this course emphasizes the introduction of basic theories rather than simply being a translation of design specifications. The book will focus on both the theoretical derivations and the engineering practices.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 628 pp. Englisch.

Buch. Zustand: Neu. Neuware -Based on the latest version of designing codes both for buildings and bridges (GB50010-2010 and JTG D62-2004), this book starts from steel and concrete materials, whose properties are very important to the mechanical behavior of concrete structural members. Step by step, analysis of reinforced and prestressed concrete members under basic loading types (tension, compression, flexure, shearing and torsion) and environmental actions are introduced. The characteristic of the book that distinguishes it from other textbooks on concrete structures is that more emphasis has been laid on the basic theories of reinforced concrete and the application of the basic theories in design of new structures and analysis of existing structures. Examples and problems in each chapter are carefully designed to cover every important knowledge point. As a basic course for undergraduates majoring in civil engineering, this course is different from either the previously learnt mechanics courses or the design courses to be learnt. Compared with mechanics courses, the basic theories of reinforced concrete structures cannot be solely derived by theoretical analysis. And compared with design courses, this course emphasizes the introduction of basic theories rather than simply being a translation of design specifications. The book will focus on both the theoretical derivations and the engineering practices.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 628 pp. Englisch.

Taschenbuch. Zustand: Neu. Social Transformation and State Governance in China | Theory, Path, and Policy Process | Xianglin Xu | Taschenbuch | xxiii | Englisch | 2021 | Springer | EAN 9789811540233 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Based on the latest version of designing codes both for buildings and bridges (GB50010-2010 and JTG D62-2004), this book starts from steel and concrete materials, whose properties are very important to the mechanical behavior of concrete structural members. Step by step, analysis of reinforced and prestressed concrete members under basic loading types (tension, compression, flexure, shearing and torsion) and environmental actions are introduced. The characteristic of the book that distinguishes it from other textbooks on concrete structures is that more emphasis has been laid on the basic theories of reinforced concrete and the application of the basic theories in design of new structures and analysis of existing structures. Examples and problems in each chapter are carefully designed to cover every important knowledge point. As a basic course for undergraduates majoring in civil engineering,this courseis different from either the previously learnt mechanics courses or the design courses to be learnt. Compared with mechanics courses, the basic theories of reinforced concrete structures cannot be solely derived by theoretical analysis. And compared with design courses, this course emphasizes the introduction of basic theories rather than simply being a translation of design specifications.The book willfocus on both the theoretical derivations andthe engineering practices.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This volume is a selection of Chinese political scholar Xianglin Xu's published works spanning nearly 20 years of research that explore and discuss the socio-economic transition in China under state political reform. Contextualized within the decades following the 80s, the author analyzes patterns observed fromempirical studies, and breaks down the underlining reasoning, conditions and functionalities behind the incremental reform policies pushed forward by the Partyandgovernment.The collection is broken up into four sections: the first provides a general framework and theoretical / historical introduction to social transitionresearchin the case of China;the second section discusses the underpinning logic behind political reform in China and practical concerns; the third section follows with discussions on reform policy practices within China including application and trajectory;the final section concludes with an analysis of reform within state institutional infrastructure and policy innovation.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This volume is a selection of Chinese political scholar Xianglin Xu's published works spanning nearly 20 years of research that explore and discuss the socio-economic transition in China under state political reform. Contextualized within the decades following the 80s, the author analyzes patterns observed fromempirical studies, and breaks down the underlining reasoning, conditions and functionalities behind the incremental reform policies pushed forward by the Partyandgovernment.The collection is broken up into four sections: the first provides a general framework and theoretical / historical introduction to social transitionresearchin the case of China;the second section discusses the underpinning logic behind political reform in China and practical concerns; the third section follows with discussions on reform policy practices within China including application and trajectory;the final section concludes with an analysis of reform within state institutional infrastructure and policy innovation.

Taschenbuch. Zustand: Neu. Neuware -The soft-sensing and optimal control of microbial fermentation process has become an important research content in the biotechnology field. It is of great significance to improve the level of equipment automation, promote the innovation of biotechnology technology, improve production efficiency and economic efficiency.In this book, the inverse soft sensing model of fermentation process is constructed by combining inverse system method and least square support vector machine theory(LS-SVM), LS-SVM is used to approximate the nonlinear function which is difficult to express explicitly in the inverse soft-sensing model, and the support is established. Secondly, in order to realize decoupling and optimal control of multivariable nonlinear systems, the inverse control method of LS-SVM is proposed, and the inverse system method is combined with IMC. A new method of internal model control for inverse system based on LS-SVM is proposed, which improves the robustness and anti-jamming ability of the inverse control method. Furthermore, the theoretical results are applied to the development of engineering software, and good results are obtained.Books on Demand GmbH, Überseering 33, 22297 Hamburg 176 pp. Englisch.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | The soft-sensing and optimal control of microbial fermentation process has become an important research content in the biotechnology field. It is of great significance to improve the level of equipment automation, promote the innovation of biotechnology technology, improve production efficiency and economic efficiency.In this book, the inverse soft sensing model of fermentation process is constructed by combining inverse system method and least square support vector machine theory(LS-SVM), LS-SVM is used to approximate the nonlinear function which is difficult to express explicitly in the inverse soft-sensing model, and the support is established. Secondly, in order to realize decoupling and optimal control of multivariable nonlinear systems, the inverse control method of LS-SVM is proposed, and the inverse system method is combined with IMC. A new method of internal model control for inverse system based on LS-SVM is proposed, which improves the robustness and anti-jamming ability of the inverse control method. Furthermore, the theoretical results are applied to the development of engineering software, and good results are obtained.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New.

Taschenbuch. Zustand: Neu. Molecular Mechanisms of Metal Toxicity and Carcinogenesis | Xianglin Shi (u. a.) | Taschenbuch | vii | Englisch | 2001 | Springer US | EAN 9780792374985 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Molecular Mechanisms of Metal Toxicity and Carcinogenesis | Xianglin Shi (u. a.) | Taschenbuch | vii | Englisch | 2012 | Springer US | EAN 9781461352426 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: New. pp. viii + 406 Illus.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - During the last two decades, chemical and cellular studies have contributed enormously to our understanding of metal-induced carcinogenesis, and many hypotheses on the role of metals in pathophysiological processes have been investigated. In addition, new techniques are available to shed light on the mechanism of carcinogenesis in molecular terms. This conference on Molecular Mechanisms of Metal Toxicity and Carcinogenesis in September 2000 focused on the latest research in molecular mechanisms of metal-induced toxicity and carcinogenesis. The conference promoted a multidisciplinary investigative approach and included presentations from international experts on state-of-the-art information in this field.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - During the last two decades, chemical and cellular studies have contributed enormously to our understanding of metal-induced carcinogenesis, and many hypotheses on the role of metals in pathophysiological processes have been investigated. In addition, new techniques are available to shed light on the mechanism of carcinogenesis in molecular terms. This conference on Molecular Mechanisms of Metal Toxicity and Carcinogenesis in September 2000 focused on the latest research in molecular mechanisms of metal-induced toxicity and carcinogenesis. The conference promoted a multidisciplinary investigative approach and included presentations from international experts on state-of-the-art information in this field.

Paperback. Zustand: Brand New. 249 pages. 11.69x8.26x0.57 inches. In Stock.

Paperback. Zustand: Brand New. reprint edition. 420 pages. 10.98x8.27x0.99 inches. In Stock.

Zustand: New.