Gesamtpreis (1 Artikel Artikel):
Versandziel:
whelan goff (19 Ergebnisse)
Direkt zu den wichtigsten Suchergebnissen
Suchfilter
Produktart
- Alle Product Types
- Bücher (19)
- Magazine & Zeitschriften (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Comics (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Noten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Kunst, Grafik & Poster (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Fotografien (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Karten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Manuskripte & Papierantiquitäten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Zustand Mehr dazu
- Neu (11)
- Wie Neu, Sehr Gut oder Gut Bis Sehr Gut (1)
- Gut oder Befriedigend (6)
- Ausreichend oder Schlecht (1)
- Wie beschrieben (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Einband
Weitere Eigenschaften
- Erstausgabe (2)
- Signiert (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Schutzumschlag (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Angebotsfoto (3)
Sprache (2)
Gratisversand
Land des Verkäufers
Verkäuferbewertung
-
Injection Molding Of Engineering Thermoplastics (Pocket Guides to Plastics)
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Injection Molding Of Engineering Thermoplastics (Pocket Guides to Plastics)
Sprache: Englisch
Verlag: Van Nostrand Reinhold Company, 1990
ISBN 10: 0442303211 ISBN 13: 9780442303211
Anbieter: Zubal-Books, Since 1961, Cleveland, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. *Price HAS BEEN REDUCED by 10% until Monday, June 1 (weekend SALE item)* 268 pp., paperback, very good. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
-
Injection Molding Of Engineering Thermoplastics (Pocket Guides to Plastics)
Anbieter: Phatpocket Limited, Waltham Abbey, HERTS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 1,19
EUR 12,28 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 9 verfügbar
In den WarenkorbZustand: Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Shows some signs of wear but in good overall condition. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.
-
Moulding of Thermosetting Plastics
Verlag: None Stated NULL
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 3,00
EUR 15,70 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Fair. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In fair condition, suitable as a study copy. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,200grams, ISBN:
-
Molding Of Thermosetting Plastics (pocket Guides To Plastics)
Anbieter: Romtrade Corp., STERLING HEIGHTS, MI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.
-
The Dynisco Injection Molders Handbook
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Injection Molding of Thermoplastics Materials - Volume 2
Sprache: Englisch
Verlag: Springer Science & Business Media, USA, 1990
ISBN 10: 0442305508 ISBN 13: 9780442305505
Anbieter: CURIO, Cleethorpes, North East Lincolnshire, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Erstausgabe
EUR 30,91
EUR 34,63 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbSoft cover. Zustand: Very Good. No Jacket. 1st Edition. Paperback copy, no dustjacket as issued. 189pp. Not library copy, no inscriptions, no creasing to spine, crease to bottom corner of front cover. (55/2).
-
Soft cover. Zustand: Fine. 1st Edition. Van Nostrand Reinhold; 1st Edition (1990). Fine Soft cover (White binding, Blue lettering). Unused book with signature on the flyleaf. 7.9"x4.5". be25531.
-
Molding of Thermosetting Plastics (My First Library)
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 58,66
EUR 13,83 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Developments in Plastics Technology?4
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 60,39
EUR 13,83 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Developments in Injection Moulding 3 (Developments Series)
Sprache: Englisch
Verlag: Elsevier Science Publishing Company, 1985
ISBN 10: 0853343667 ISBN 13: 9780853343660
Anbieter: Zubal-Books, Since 1961, Cleveland, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. *Price HAS BEEN REDUCED by 10% until Monday, June 1 (weekend SALE item)* 324 pp., hardcover, ex library, else text clean & binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
-
Molding of Thermosetting Plastics
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 75,18
EUR 11,54 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 1st edition. 110 pages. 7.75x4.50x0.50 inches. In Stock.
-
Developments in Plastics Technology 4
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 77,99
EUR 11,54 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 328 pages. 8.35x5.43x0.71 inches. In Stock.
-
Injection Molding of Thermoplastics Materials: Vol 1
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 75,70
EUR 14,43 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 167 pages. 8.00x4.75x0.50 inches. In Stock.
-
Moulding of Thermosetting Plastics
Sprache: Englisch
Verlag: Kluwer Academic Publishers Group, 1990
ISBN 10: 0442303181 ISBN 13: 9780442303181
Anbieter: Kennys Bookstore, Olney, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Editor(s): Whelan, Tony; Goff, John. Series: VNR Pocket Guides to Plastics. Num Pages: 110 pages, biography. BIC Classification: TDCP. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate; (XV) Technical / Manuals. Dimension: 203 x 127 x 7. Weight in Grams: 160. . 1990. Paperback. . . . . Books ship from the US and Ireland.
-
Injection Molding of Thermoplastic Materials
Sprache: Englisch
Verlag: Kluwer Academic Publishers Group, 1991
ISBN 10: 0442305508 ISBN 13: 9780442305505
Anbieter: Kennys Bookstore, Olney, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. This book provides a wealth of rapidly accessible information on the injection molding process for, as well as the characteristics of, thermoplastic materials. Series: VNR Pocket Guides to Plastics. Num Pages: 189 pages, biography. BIC Classification: TDCP. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 203 x 127 x 10. Weight in Grams: 214. . 1991. Paperback. . . . . Books ship from the US and Ireland.
-
Injection Moulding of Thermoplastic Materials
Sprache: Englisch
Verlag: Kluwer Academic Publishers Group, 1990
ISBN 10: 0442303068 ISBN 13: 9780442303068
Anbieter: Kennys Bookstore, Olney, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Series: VNR Pocket Guides to Plastics Series. Num Pages: 167 pages, biography. BIC Classification: TDCP. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 203 x 127 x 9. Weight in Grams: 850. . 1990. Softcover reprint of the original 1st ed. 1990. Paperback. . . . . Books ship from the US and Ireland.
-
Molding of Thermosetting Plastics
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - During the years 1987 and 1988 we published a series of articles on the molding of thermoplastics materials in the magazine British Plastics and Rubber (B P & R). These articles were very well received and we also received a large number of requests for reprints. In order to cater for what is obviously a need in the thermoplas tics molding industry, we therefore brought the information together and produced it in the form of a book. We can only hope that it serves you well and that you find the information useful. We in turn would like to thank the editor of the magazine B P & R for helping us in this matter. Thanks are also due to our many friends and colleagues throughout the molding industry for their useful help and advice, in particular the company Moldflow (Europe) limited deserve a special mention as they allowed us to extract information from their extensive data base.
-
Developments in Plastics Technology¿4
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Because of the sheer size and scope of the plastics industry, the title Developments in Plastics Technology now covers an incredibly wide range of subjects or topics. No single volume can survey the whole field in any depth and what follows is, therefore, a series of chapters on selected topics. The topics were selected by us, the editors, because of their immediate relevance to the plastics industry. When one considers the advancements of the plastics processing machinery (in terms of its speed of operation and conciseness of control), it was felt that several chapters should be included which related to the types of control systems used and the correct usage of hydraulics. The importance of using cellular, rubber-modified and engineering-type plastics has had a major impact on the plastics industry and therefore a chapter on each of these subjects has been included. The two remaining chapters are on the characterisation and behaviour of polymer structures, both subjects again being of current academic or industrial interest. Each of the contributions was written by a specialist in that field and to them all, we, the editors, extend our heartfelt thanks, as writing a contribution for a book such as this, while doing a full-time job, is no easy task.
