Tonkonogyi (38 Ergebnisse)
Sprache: Englisch
Verlag: Cham, Springer. 2020
Serie: Lecture Notes in Mechanical Engineering, Buch 118 von 268. Buch 118 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: Universitätsbuchhandlung Herta Hold GmbH, Berlin, , DeutschlandUniversitätsbuchhandlung Herta Hold GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Gebraucht
EUR 20,00
EUR 30,00 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
XIX, 629 p. Softcover. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Lecture Notes in Mechanical Engineering. Sprache: Englisch.
- Softcover
Anbieter: Buchpark, Trebbin, , DeutschlandBuchpark
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht
EUR 85,82
EUR 105,00 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 616 | Sprache: Englisch | Produktart: Bücher | This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as g…rinding, boring, milling, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenkös International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6¿9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
Weitere BilderSprache: Englisch
Verlag: Springer 2020
Serie: Lecture Notes in Mechanical Engineering, Buch 118 von 268. Buch 118 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 140,00
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Advanced Manufacturing Processes | Selected Papers from the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2019), September 10-13, 2019, Odessa, Ukraine | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xix | Englisch | 202…0 | Springer | EAN 9783030407230 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Sprache: Englisch
Verlag: Springer International Publishing 2020
Serie: Lecture Notes in Mechanical Engineering, Buch 118 von 268. Buch 118 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 160,49
EUR 64,86 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely yet comprehensive snapshot of innovative research and developments in the area of manufacturing. It covers a wide range of manufacturing processes, such as cutting, coatings, and grinding, highlighting the advantages provide…d by the use of new materials and composites, as well as new methods and technologies. It discusses topics in energy generation and pollution prevention. It shows how computational methods and mathematical models have been applied to solve a number of issues in both theoretical and applied research. Based on selected papers presented at the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering. It is also intended to facilitate communication and collaboration between different groups working on similar topics, and to offer a bridge between academic and industrial researchers.
- Hardcover
Anbieter: Books From California, Simi Valley, CA, USABooks From California
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Gebraucht - Befriedigend
EUR 232,90
EUR 4,37 VersandVersand innerhalb von USAAnzahl: 1 verfügbar
hardcover. Zustand: Good. cover warped minor wear and creasing.
Sprache: Englisch
Verlag: Springer 2021
Serie: Lecture Notes in Mechanical Engineering, Buch 185 von 268. Buch 185 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 225,73
EUR 13,89 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Hardcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 225,73
EUR 13,89 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 225,73
EUR 13,89 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
Weitere Bilder- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 184,85
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Advanced Manufacturing Processes IV | Selected Papers from the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), September 6-9, 2022, Odessa, Ukraine | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xviii | Englisc…h | 2023 | Springer | EAN 9783031166532 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Sprache: Englisch
Verlag: Springer 2021
Serie: Lecture Notes in Mechanical Engineering, Buch 185 von 268. Buch 185 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 184,85
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Advanced Manufacturing Processes II | Selected Papers from the 2nd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2020), September 8-11, 2020, Odessa, Ukraine | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xxiii | Englis…ch | 2021 | Springer | EAN 9783030680138 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Hardcover
Anbieter: Buchpark, Trebbin, , DeutschlandBuchpark
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht
EUR 153,56
EUR 105,00 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 604 | Sprache: Englisch | Produktart: Bücher | This book offers a timely snapshot of innovative research and developments at the interface between design, manufacturing, materials, mechanical and process engineering, and quality assurance. It covers various manufacturing pro…cesses, such as grinding, milling, broaching, and gear machining, including additive manufacturing, vibrational-centrifugal strengthening, laser-ultrasonic surface hardening, and antifriction coatings. It focuses on computer and numerical simulation, mathematical and integrated process modeling, parametric synthesis, virtual prototyping, automatic control, design of manufacturing, mechanical and mechatronics systems. It describes innovative cutting and abrasive processes and combined technologies. It also covers the formation, strengthening, and thermomechanical rolling. It also investigates the temperature field behavior, thermal stability, wear resistance, and other processes of various materials. Gathering the best papers presented at the 5th GrabchenkösInternational Conference on Advanced Manufacturing Processes (InterPartner-2023), held on September 5¿8, 2023, in Odessa, Ukraine, this book provides a comprehensive and up-to-date examination of design, manufacturing, mechanical, materials, and process engineering, as well as quality assurance trends and technologies. Yet, it also aims at fostering international and interdisciplinary communication and collaborations, offering a bridge between the academic and industrial sector.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 213,99
EUR 64,60 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as grinding, boring, milli…ng, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6-9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
- Hardcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 213,99
EUR 65,40 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as grinding, boring, milling, bro…aching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6-9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
Sprache: Englisch
Verlag: Springer International Publishing 2021
Serie: Lecture Notes in Mechanical Engineering, Buch 185 von 268. Buch 185 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 213,99
EUR 66,53 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely yet comprehensive snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such…as cutting, grinding, assembly, and coatings, including ultrasonic treatment, molding, radial-isostatic compression, ionic-plasma deposition, volumetric vibration treatment, and wear resistance. It also highlights the advantages of augmented reality, RFID technology, reverse engineering, optimization, heat and mass transfer, energy management, quality inspection, and environmental impact. Based on selected papers presented at the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2020), held in Odessa, Ukraine, on September 8-11, 2020, this book offers a timely overview and extensive information on trends and technologies in production planning, design engineering, advanced materials, machining processes, process engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and offer a bridge between academic and industrial researchers.
- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 211,75
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Advanced Manufacturing Processes VII | Selected Papers from the 7th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2025), September 23-26, 2025, Kielce, Poland | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | xvii | Englisch | 2026 | Springer | EAN 9783032149251 |… Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Softcover
Anbieter: Revaluation Books, Exeter, , Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 309,52
EUR 14,49 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Brand New. 615 pages. 9.25x6.10x1.24 inches. In Stock.
- Hardcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 311,32
EUR 13,89 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 246,09
EUR 65,62 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between engineering design, manufacturing and quality assurance. It covers various manufacturing processes, such as grinding, turning, drilling, milling. It h…ighlights advances in additive manufacturing, surface hardening, and plasma electrolytic oxidation, as well as topics in diagnostics, maintenance, and assembly. It also focuses on optimization methods, mathematical modeling, and computer and numerical simulation for mechanical systems and manufacturing processes. In turn, chapters investigate the thermal parameters, mechanism of transition zone formation, corrosion resistance, and coating porosity of materials and alloys. Gathering the best papers presented at the 7th Grabchenko s International Conference on Advanced Manufacturing Processes (InterPartner-2025), held in Kielce, Poland, on September 23 26, 2025, this book provides a comprehensive report on trends in engineering design, manufacturing and materials engineering, covering quality assurance topics and smart technologies, alike. It also aims to foster international and interdisciplinary communication and cooperation, offering a bridge between the academic and industrial sectors.
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 311,32
EUR 13,89 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Hardcover
Anbieter: Revaluation Books, Exeter, , Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 311,69
EUR 17,39 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Hardcover. Zustand: Brand New. 615 pages. 9.25x6.10x1.31 inches. In Stock.
Sprache: Englisch
Verlag: Springer Nature 2021
Serie: Lecture Notes in Mechanical Engineering, Buch 185 von 268. Buch 185 von 268 - Lecture Notes in Mechanical Engineering
- Softcover
Anbieter: Revaluation Books, Exeter, , Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 313,75
EUR 17,39 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Brand New. 880 pages. 9.25x6.10x1.74 inches. In Stock.
- Hardcover
Anbieter: Kennys Bookstore, Olney, MD, USAKennys Bookstore
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 324,44
EUR 9,19 VersandVersand innerhalb von USAAnzahl: 15 verfügbar
Zustand: New.
Weitere Bilder- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 274,55
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Advanced Manufacturing Processes III | Selected Papers from the 3rd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2021), September 7-10, 2021, Odessa, Ukraine | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xx | Englisch… | 2022 | Springer | EAN 9783030913298 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Softcover
Anbieter: Revaluation Books, Exeter, , Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 352,65
EUR 17,39 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Brand New. 752 pages. 6.14x1.51x9.21 inches. In Stock.
- Softcover
Anbieter: Buchpark, Trebbin, , DeutschlandBuchpark
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Sehr gut
EUR 252,30
EUR 105,00 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 740 | Sprache: Englisch | Produktart: Bücher | This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as g…rinding, boring, milling, turning, woodworking, coatings, including additive manufacturing. It focuses on laser, ultrasonic, and combined laser¿ultrasonic hardening treatments, and dispersion hardening. It describes tribology and functional analysis of coatings, separation, purification and filtration processes, as well as ecological recirculation and electrohydraulic activation, highlighting the growing role of digital twins, optimization and lifecycle management methods, and quality inspection processes. It also covers cutting-edge heat and mass transfer technologies and energy management methods. Gathering the best papers presented at the 3rd Grabchenkös International Conference on Advanced Manufacturing Processes (InterPartner-2021), held in Odessa, Ukraine, on September 7¿10, 2021, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 301,45
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Advanced Manufacturing Processes V | Selected Papers from the 5th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2023), September 5-8, 2023, Odessa, Ukraine | Volodymyr Tonkonogyi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xviii | Englisch… | 2024 | Springer | EAN 9783031427800 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Hardcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 372,46
EUR 13,89 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In English.
Sprache: Englisch
Verlag: Springer International Publishing 2021
Serie: Lecture Notes in Mechanical Engineering, Buch 251 von 268. Buch 251 von 268 - Lecture Notes in Mechanical Engineering
- Hardcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 320,99
EUR 66,31 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as grinding, boring, mill…ing, turning, woodworking, coatings, including additive manufacturing. It focuses on laser, ultrasonic, and combined laser-ultrasonic hardening treatments, and dispersion hardening. It describes tribology and functional analysis of coatings, separation, purification and filtration processes, as well as ecological recirculation and electrohydraulic activation, highlighting the growing role of digital twins, optimization and lifecycle management methods, and quality inspection processes. It also covers cutting-edge heat and mass transfer technologies and energy management methods. Gathering the best papers presented at the 3rd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2021), held in Odessa, Ukraine, on September 7-10, 2021, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 333,77
EUR 65,51 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers a wide range of manufacturing processes, such as grinding, borin…g, milling, turning, woodworking, coatings, including additive manufacturing. It focuses on laser, ultrasonic, and combined laser-ultrasonic hardening treatments, and dispersion hardening. It describes tribology and functional analysis of coatings, separation, purification and filtration processes, as well as ecological recirculation and electrohydraulic activation, highlighting the growing role of digital twins, optimization and lifecycle management methods, and quality inspection processes. It also covers cutting-edge heat and mass transfer technologies and energy management methods. Gathering the best papers presented at the 3rd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2021), held in Odessa, Ukraine, on September 7-10, 2021, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
Sprache: Englisch
Verlag: Springer Nature Switzerland, Springer Nature Switzerland 2024
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 353,09
EUR 64,51 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers a timely snapshot of innovative research and developments at the interface between design, manufacturing, materials, mechanical and process engineering, and quality assurance. It covers various manufacturing processes, such as grindi…ng, milling, broaching, and gear machining, including additive manufacturing, vibrational-centrifugal strengthening, laser-ultrasonic surface hardening, and antifriction coatings. It focuses on computer and numerical simulation, mathematical and integrated process modeling, parametric synthesis, virtual prototyping, automatic control, design of manufacturing, mechanical and mechatronics systems. It describes innovative cutting and abrasive processes and combined technologies. It also covers the formation, strengthening, and thermomechanical rolling. It also investigates the temperature field behavior, thermal stability, wear resistance, and other processes of various materials. Gathering the best papers presented at the 5th Grabchenko'sInternational Conference on Advanced Manufacturing Processes (InterPartner-2023), held on September 5-8, 2023, in Odessa, Ukraine,this book provides a comprehensive and up-to-date examination of design, manufacturing, mechanical, materials, and process engineering, as well as quality assurance trends and technologies. Yet, it also aims at fostering international and interdisciplinary communication and collaborations, offering a bridge between the academic and industrial sector.
