schobeiri (39 Ergebnisse)

24 cm. XXI, 522 S. grapg. Darst. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Stamped. Sprache: Englisch.

Hardcover. Zustand: Very Good. 1st ed. 2021. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New.

Paperback. Zustand: Brand New. 260 pages. 9.25x6.10x0.71 inches. In Stock.

Zustand: New.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book unies the common tensor analytical aspects in engineering and physics. Using tensor analysis enables the reader to understand complex physical phenomena from the basic principles in continuum mechanics including the turbulence, its correlations and modeling to the complex Einstein' tensor equation. The development of General Theory of Relativity and the introduction of spacetime geometry would not have been possible without the use of tensor analysis. This textbook is primarily aimed at students of mechanical, electrical, aerospace, civil and other engineering disciplines as well as of theoretical physics. It also covers the special needs of practicing professionals who perform CFD-simulation on a routine basis and would like to know more about the underlying physics of the commercial codes they use. Furthermore, it is suitable for self-study, provided that the reader has a sufficient knowledge of differential and integral calculus. Particular attention was paid to selecting the application examples. The transformation of Cartesian coordinate system into curvilinear one and the subsequent applications to conservation laws of continuum mechanics and the turbulence physics prepares the reader for fully understanding the Einstein tensor equations, which exhibits one of the most complex tensor equation in theoretical physics.

Taschenbuch. Zustand: Neu. Tensor Analysis for Engineers and Physicists - With Application to Continuum Mechanics, Turbulence, and Einstein's Special and General Theory of Relativity | Meinhard T. Schobeiri | Taschenbuch | xix | Englisch | 2022 | Springer | EAN 9783030357382 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: New.

Paperback. Zustand: Brand New. 609 pages. 9.25x6.10x1.42 inches. In Stock.

Zustand: New.

Paperback. Zustand: Brand New. 2010 edition. 528 pages. 9.25x6.10x1.06 inches. In Stock.

Taschenbuch. Zustand: Neu. Fluid Mechanics for Engineers | A Graduate Textbook | Meinhard T. Schobeiri | Taschenbuch | xxii | Englisch | 2014 | Springer | EAN 9783642427480 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Advanced Fluid Mechanics and Heat Transfer for Engineers and Scientists | Meinhard T. Schobeiri | Taschenbuch | xxv | Englisch | 2023 | Springer | EAN 9783030729271 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Neuware -The contents of this book covers the material required in the Fluid Mechanics Graduate Core Course (MEEN-621) and in Advanced Fluid Mechanics, a Ph. D-level elective course (MEEN-622), both of which I have been teaching at Texas A&M University for the past two decades. While there are numerous undergraduate fluid mechanics texts on the market for engineering students and instructors to choose from, there are only limited texts that comprehensively address the particular needs of graduate engineering fluid mechanics courses. To complement the lecture materials, the instructors more often recommend several texts, each of which treats special topics of fluid mechanics. This circumstance and the need to have a textbook that covers the materials needed in the above courses gave the impetus to provide the graduate engineering community with a coherent textbook that comprehensively addresses their needs for an advanced fluid mechanics text. Although this text book is primarily aimed at mechanical engineering students, it is equally suitable for aerospace engineering, civil engineering, other engineering disciplines, and especially those practicing professionals who perform CFD-simulation on a routine basis and would like to know more about the underlying physics of the commercial codes they use. Furthermore, it is suitable for self study, provided that the reader has a sufficient knowledge of calculus and differential equations. In the past, because of the lack of advanced computational capability, the subject of fluid mechanics was artificially subdivided into inviscid, viscous (laminar, turbulent), incompressible, compressible, subsonic, supersonic and hypersonic flows.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 528 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The contents of this book covers the material required in the Fluid Mechanics Graduate Core Course (MEEN-621) and in Advanced Fluid Mechanics, a Ph. D-level elective course (MEEN-622), both of which I have been teaching at Texas A&M University for the past two decades. While there are numerous undergraduate fluid mechanics texts on the market for engineering students and instructors to choose from, there are only limited texts that comprehensively address the particular needs of graduate engineering fluid mechanics courses. To complement the lecture materials, the instructors more often recommend several texts, each of which treats special topics of fluid mechanics. This circumstance and the need to have a textbook that covers the materials needed in the above courses gave the impetus to provide the graduate engineering community with a coherent textbook that comprehensively addresses their needs for an advanced fluid mechanics text. Although this text book is primarily aimed at mechanical engineering students, it is equally suitable for aerospace engineering, civil engineering, other engineering disciplines, and especially those practicing professionals who perform CFD-simulation on a routine basis and would like to know more about the underlying physics of the commercial codes they use. Furthermore, it is suitable for self study, provided that the reader has a sufficient knowledge of calculus and differential equations. In the past, because of the lack of advanced computational capability, the subject of fluid mechanics was artificially subdivided into inviscid, viscous (laminar, turbulent), incompressible, compressible, subsonic, supersonic and hypersonic flows.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The current book, Advanced Fluid Mechanics and Heat Transfer is based on author's four decades of industrial and academic research in the area of thermofluid sciences including fluid mechanics, aero-thermodynamics, heat transfer and their applications to engineering systems. Fluid mechanics and heat transfer are inextricably intertwined and both are two integral parts of one physical discipline. No problem from fluid mechanics that requires the calculation of the temperature can be solved using the system of Navier-Stokes and continuity equations only. Conversely, no heat transfer problem can be solved using the energy equation only without using the Navier-Stokes and continuity equations. The fact that there is no book treating this physical discipline as a unified subject in a single book that considers the need of the engineering and physics community, motivated the author to write this book. It is primarily aimed at students of engineering, physics and those practicing professionals who perform aero-thermo-heat transfer design tasks in the industry and would like to deepen their knowledge in this area. The contents of this new book covers the material required in Fluid Mechanics and Heat Transfer Graduate Core Courses in the US universities. It also covers the major parts of the Ph.D-level elective courses AdvancedFluid Mechanics and Heat Transfer that the author has been teaching at Texas A&M University for the past three decades.

Hardcover. Zustand: Brand New. 260 pages. 9.25x6.10x0.75 inches. In Stock.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book unies the common tensor analytical aspects in engineering and physics. Using tensor analysis enables the reader to understand complex physical phenomena from the basic principles in continuum mechanics including the turbulence, its correlations and modeling to the complex Einstein' tensor equation. The development of General Theory of Relativity and the introduction of spacetime geometry would not have been possible without the use of tensor analysis. This textbook is primarily aimed at students of mechanical, electrical, aerospace, civil and other engineering disciplines as well as of theoretical physics. It also covers the special needs of practicing professionals who perform CFD-simulation on a routine basis and would like to know more about the underlying physics of the commercial codes they use. Furthermore, it is suitable for self-study, provided that the reader has a sufficient knowledge of differential and integral calculus. Particular attention was paid to selecting the application examples. The transformation of Cartesian coordinate system into curvilinear one and the subsequent applications to conservation laws of continuum mechanics and the turbulence physics prepares the reader for fully understanding the Einstein tensor equations, which exhibits one of the most complex tensor equation in theoretical physics.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Hardcover. Zustand: Brand New. 495 pages. 9.45x6.46x1.26 inches. In Stock.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The contents of this book covers the material required in the Fluid Mechanics Graduate Core Course (MEEN-621) and in Advanced Fluid Mechanics, a Ph. D-level elective course (MEEN-622), both of which I have been teaching at Texas A&M University for the past two decades. While there are numerous undergraduate fluid mechanics texts on the market for engineering students and instructors to choose from, there are only limited texts that comprehensively address the particular needs of graduate engineering fluid mechanics courses. To complement the lecture materials, the instructors more often recommend several texts, each of which treats special topics of fluid mechanics. This circumstance and the need to have a textbook that covers the materials needed in the above courses gave the impetus to provide the graduate engineering community with a coherent textbook that comprehensively addresses their needs for an advanced fluid mechanics text. Although this text book is primarily aimed at mechanical engineering students, it is equally suitable for aerospace engineering, civil engineering, other engineering disciplines, and especially those practicing professionals who perform CFD-simulation on a routine basis and would like to know more about the underlying physics of the commercial codes they use. Furthermore, it is suitable for self study, provided that the reader has a sufficient knowledge of calculus and differential equations. In the past, because of the lack of advanced computational capability, the subject of fluid mechanics was artificially subdivided into inviscid, viscous (laminar, turbulent), incompressible, compressible, subsonic, supersonic and hypersonic flows.

Buch. Zustand: Neu. Neuware -The current book, Advanced Fluid Mechanics and Heat Transfer is based on author's four decades of industrial and academic research in the area of thermofluid sciences including fluid mechanics, aero-thermodynamics, heat transfer and their applications to engineering systems. Fluid mechanics and heat transfer are inextricably intertwined and both are two integral parts of one physical discipline. No problem from fluid mechanics that requires the calculation of the temperature can be solved using the system of Navier-Stokes and continuity equations only. Conversely, no heat transfer problem can be solved using the energy equation only without using the Navier-Stokes and continuity equations. The fact that there is no book treating this physical discipline as a unified subject in a single book that considers the need of the engineering and physics community, motivated the author to write this book. It is primarily aimed at students of engineering, physics and those practicing professionals who perform aero-thermo-heat transfer design tasks in the industry and would like to deepen their knowledge in this area. The contents of this new book covers the material required in Fluid Mechanics and Heat Transfer Graduate Core Courses in the US universities. It also covers the major parts of the Ph.D-level elective courses Advanced Fluid Mechanics and Heat Transfer that the author has been teaching at Texas A&M University for the past three decades.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 612 pp. Englisch.

Buch. Zustand: Neu. Neuware -The contents of this book covers the material required in the Fluid Mechanics Graduate Core Course (MEEN-621) and in Advanced Fluid Mechanics, a Ph. D-level elective course (MEEN-622), both of which I have been teaching at Texas A&M University for the past two decades. While there are numerous undergraduate fluid mechanics texts on the market for engineering students and instructors to choose from, there are only limited texts that comprehensively address the particular needs of graduate engineering fluid mechanics courses. To complement the lecture materials, the instructors more often recommend several texts, each of which treats special topics of fluid mechanics. This circumstance and the need to have a textbook that covers the materials needed in the above courses gave the impetus to provide the graduate engineering community with a coherent textbook that comprehensively addresses their needs for an advanced fluid mechanics text. Although this text book is primarily aimed at mechanical engineering students, it is equally suitable for aerospace engineering, civil engineering, other engineering disciplines, and especially those practicing professionals who perform CFD-simulation on a routine basis and would like to know more about the underlying physics of the commercial codes they use. Furthermore, it is suitable for self study, provided that the reader has a sufficient knowledge of calculus and differential equations. In the past, because of the lack of advanced computational capability, the subject of fluid mechanics was artificially subdivided into inviscid, viscous (laminar, turbulent), incompressible, compressible, subsonic, supersonic and hypersonic flows.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 528 pp. Englisch.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The current book, Advanced Fluid Mechanics and Heat Transfer is based on author's four decades of industrial and academic research in the area of thermofluid sciences including fluid mechanics, aero-thermodynamics, heat transfer and their applications to engineering systems. Fluid mechanics and heat transfer are inextricably intertwined and both are two integral parts of one physical discipline. No problem from fluid mechanics that requires the calculation of the temperature can be solved using the system of Navier-Stokes and continuity equations only. Conversely, no heat transfer problem can be solved using the energy equation only without using the Navier-Stokes and continuity equations. The fact that there is no book treating this physical discipline as a unified subject in a single book that considers the need of the engineering and physics community, motivated the author to write this book. It is primarily aimed at students of engineering, physics and those practicing professionals who perform aero-thermo-heat transfer design tasks in the industry and would like to deepen their knowledge in this area. The contents of this new book covers the material required in Fluid Mechanics and Heat Transfer Graduate Core Courses in the US universities. It also covers the major parts of the Ph.D-level elective courses AdvancedFluid Mechanics and Heat Transfer that the author has been teaching at Texas A&M University for the past three decades.

Hardcover. Zustand: Brand New. 609 pages. 9.25x6.10x1.61 inches. In Stock.

Taschenbuch. Zustand: Neu. Turbomachinery Flow Physics and Dynamic Performance | Meinhard T. Schobeiri | Taschenbuch | Einband - flex.(Paperback) | Englisch | 2010 | Springer | EAN 9783642061141 | Verantwortliche Person für die EU: Lauinger, Sonia, Sonia Lauinger, Lauinger Verlag, Heinrich-Köhler-Platz 8, 76187 Karlsruhe, mail[at]lauinger-verlag[dot]de | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Over the past three decades turbomachines experienced a steep increase in efficiency and performance. Based on fundamental principles of turbomachinery thermo-fluid mechanics, numerous CFD based calculation methods are being developed to simulate the complex 3-dimensional, highly unsteady turbulent flow within turbine or compressor stages. The objective of this book is to present the fundamental principals of turbomachinery fluid-thermodynamic design process of turbine and compressor components, power generation and aircraft gas turbines in a unified and compact manner. The book provides senior undergraduate students, graduate students and engineers in the turbomachinery industry with a solid background of turbomachinery flow physics and performance fundamentals that are essential for understanding turbomachinery performance and flow complexes.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book written by a world-renowned expert with more than forty years of active gas turbine R&D experience comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently available gas turbine handbooks that provide the reader with an overview without in-depth treatment of the subject, the current book is concentrated on a detailed aero-thermodynamics, design and off-deign performance aspects of individual components as well as the system integration and its dynamic operation.This new book provides practicing gas turbine designers and young engineers working in the industry with design material that the manufacturers would keep proprietary. The book is also intended to provide instructors of turbomachinery courses around the world with a powerful tool to assign gas turbine components as project and individual modules that are integrated into a complete system. Quoting many statements by the gas turbine industryprofessionals, the young engineers graduated from the turbomachinery courses offered by the author, had the competency of engineers equivalent to three to four years of industrial experience.

Taschenbuch. Zustand: Neu. Neuware -This book written by a world-renowned expert with more than forty years of active gas turbine R&D experience comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently available gas turbine handbooks that provide the reader with an overview without in-depth treatment of the subject, the current book is concentrated on a detailed aero-thermodynamics, design and off-deign performance aspects of individual components as well as the system integration and its dynamic operation.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 532 pp. Englisch.