schaumont patrick (23 Ergebnisse)

Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less 1.7.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher.

Taschenbuch. Zustand: Neu. Neuware -This book constitutes the thoroughly refereedpost-conference proceedings of the 11th International Workshop on RadioFrequency Identification held in New York, USA, in June 2015.The 10 revised full papers were carefully reviewed andselected from 23 submissions and are organized in topical sections on PUFs andapplications, side-channels and countermeasures, RFID system attacks, andefficient implementations.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 188 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book constitutes the thoroughly refereedpost-conference proceedings of the 11th International Workshop on RadioFrequency Identification held in New York, USA, in June 2015.The 10 revised full papers were carefully reviewed andselected from 23 submissions and are organized in topical sections on PUFs andapplications, side-channels and countermeasures, RFID system attacks, andefficient implementations.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book constitutes the refereed proceedings of the 4th International Conference on Security, Privacy, and Applied Cryptography Engineering held in Pune, India, in October 2014. The 19 papers presented together with two invited papers were carefully reviewed and selected from 66 submissions. The papers are organized in topical sections on cryptographic building blocks; mini tutorial; attacks and countermeasures; tools and methods; and secure systems and applications.

Taschenbuch. Zustand: Neu. Neuware -This book constitutes the proceedings of the 14th International Workshop on Cryptographic Hardware and Embedded Systems, CHES 2012, held in Leuven, Belgium, in September 2012. The 32 papers presented together with 1 invited talk were carefully reviewed and selected from 120 submissions. The papers are organized in the following topical sections: intrusive attacks and countermeasures; masking; improved fault attacks and side channel analysis; leakage resiliency and security analysis; physically unclonable functions; efficient implementations; lightweight cryptography; we still love RSA; and hardware implementations.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 584 pp. Englisch.

Taschenbuch. Zustand: Neu. Neuware -This book constitutes the refereed proceedings of the 4th International Conference on Security, Privacy, and Applied Cryptography Engineering held in Pune, India, in October 2014. The 19 papers presented together with two invited papers were carefully reviewed and selected from 66 submissions. The papers are organized in topical sections on cryptographic building blocks; mini tutorial; attacks and countermeasures; tools and methods; and secure systems and applications.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 356 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book constitutes the proceedings of the 14th International Workshop on Cryptographic Hardware and Embedded Systems, CHES 2012, held in Leuven, Belgium, in September 2012. The 32 papers presented together with 1 invited talk were carefully reviewed and selected from 120 submissions. The papers are organized in the following topical sections: intrusive attacks and countermeasures; masking; improved fault attacks and side channel analysis; leakage resiliency and security analysis; physically unclonable functions; efficient implementations; lightweight cryptography; we still love RSA; and hardware implementations.

Zustand: New. In.

Zustand: New. In.

Paperback. Zustand: Brand New. revised edition. 188 pages. 9.25x6.10x0.43 inches. In Stock.

Zustand: New.

Paperback. Zustand: Brand New. 2014 edition. 356 pages. 9.00x6.00x0.75 inches. In Stock.

Taschenbuch. Zustand: Neu. Neuware -This textbook serves as an introduction to the subject of embedded systems design, with emphasis on integration of custom hardware components with software. The key problem addressed in the book is the following: how can an embedded systems designer strike a balance between flexibility and efficiency The book describes how combining hardware design with software design leads to a solution to this important computer engineering problem. The book covers four topics in hardware/software codesign: fundamentals, the design space of custom architectures, the hardware/software interface and application examples. The book comes with an associated design environment that helps the reader to perform experiments in hardware/software codesign. Each chapter also includes exercises and further reading suggestions.Improvements in this second edition include labs and examples using modern FPGA environments from Xilinx and Altera, which will make the material in this book applicable to a greater number of courses where these tools are already in use. More examples and exercises have been added throughout the book.¿If I were teaching a course on this subject, I would use this as a resource and text. If I were a student who wanted to learn codesign, I would look for a course that at least used a similar approach. If I were an engineer or engineering manager who wanted to learn more about codesign from a very practical perspective, I would read this book first before any other. When I first started learning about codesign as a practitioner, a book like this would have been the perfect introduction.¿Grant Martin, Tensilica--Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 504 pp. Englisch.

Paperback. Zustand: Brand New. 2012 edition. 579 pages. 9.25x6.25x1.25 inches. In Stock.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This textbook serves as an introduction to the subject of embedded systems design, with emphasis on integration of custom hardware components with software. The key problem addressed in the book is the following: how can an embedded systems designer strike a balance between flexibility and efficiency The book describes how combining hardware design with software design leads to a solution to this important computer engineering problem. The book covers four topics in hardware/software codesign: fundamentals, the design space of custom architectures, the hardware/software interface and application examples. The book comes with an associated design environment that helps the reader to perform experiments in hardware/software codesign. Each chapter also includes exercises and further reading suggestions. Improvements in this second edition include labs and examples using modern FPGA environments from Xilinx and Altera, which will make the material in this book applicable to a greater number of courses where these tools are already in use. More examples and exercises have been added throughout the book. 'If I were teaching a course on this subject, I would use this as a resource and text. If I were a student who wanted to learn codesign, I would look for a course that at least used a similar approach. If I were an engineer or engineering manager who wanted to learn more about codesign from a very practical perspective, I would read this book first before any other. When I first started learning about codesign as a practitioner, a book like this would have been the perfect introduction.' --Grant Martin, Tensilica--.

Gebunden. Zustand: New.

Buch. Zustand: Neu. Neuware -This textbook serves as an introduction to the subject of embedded systems design, with emphasis on integration of custom hardware components with software. The key problem addressed in the book is the following: how can an embedded systems designer strike a balance between flexibility and efficiency The book describes how combining hardware design with software design leads to a solution to this important computer engineering problem. The book covers four topics in hardware/software codesign: fundamentals, the design space of custom architectures, the hardware/software interface and application examples. The book comes with an associated design environment that helps the reader to perform experiments in hardware/software codesign. Each chapter also includes exercises and further reading suggestions.Improvements in this second edition include labs and examples using modern FPGA environments from Xilinx and Altera, which will make the material in this book applicable to a greater number of courses where these tools are already in use. More examples and exercises have been added throughout the book.¿If I were teaching a course on this subject, I would use this as a resource and text. If I were a student who wanted to learn codesign, I would look for a course that at least used a similar approach. If I were an engineer or engineering manager who wanted to learn more about codesign from a very practical perspective, I would read this book first before any other. When I first started learning about codesign as a practitioner, a book like this would have been the perfect introduction.¿Grant Martin, Tensilica--Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 504 pp. Englisch.

Zustand: New. In.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This textbook serves as an introduction to the subject of embedded systems design, with emphasis on integration of custom hardware components with software. The key problem addressed in the book is the following: how can an embedded systems designer strike a balance between flexibility and efficiency The book describes how combining hardware design with software design leads to a solution to this important computer engineering problem. The book covers four topics in hardware/software codesign: fundamentals, the design space of custom architectures, the hardware/software interface and application examples. The book comes with an associated design environment that helps the reader to perform experiments in hardware/software codesign. Each chapter also includes exercises and further reading suggestions. Improvements in this second edition include labs and examples using modern FPGA environments from Xilinx and Altera, which will make the material in this book applicable to a greater number of courses where these tools are already in use. More examples and exercises have been added throughout the book. 'If I were teaching a course on this subject, I would use this as a resource and text. If I were a student who wanted to learn codesign, I would look for a course that at least used a similar approach. If I were an engineer or engineering manager who wanted to learn more about codesign from a very practical perspective, I would read this book first before any other. When I first started learning about codesign as a practitioner, a book like this would have been the perfect introduction.' --Grant Martin, Tensilica--.

Paperback. Zustand: Brand New. 2nd edition. 504 pages. 9.30x6.20x1.14 inches. In Stock.