rizzi caterina (38 Ergebnisse)

Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,500grams, ISBN:9780857297747.

Zustand: New. In.

Zustand: New.

Paperback. Zustand: Brand New. 460 pages. 9.25x6.10x1.08 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2-4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.

Taschenbuch. Zustand: Neu. Advances on Mechanics, Design Engineering and Manufacturing III | Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, JCM 2020, June 2-4, 2020 | Lionel Roucoules (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xvii | Englisch | 2021 | Springer | EAN 9783030705657 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: New. In.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 460 | Sprache: Englisch | Produktart: Bücher | This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2¿4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 460 | Sprache: Englisch | Produktart: Bücher | This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2¿4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.

Zustand: New. In.

Hardcover. Zustand: Brand New. 202 pages. 9.25x6.25x0.50 inches. In Stock.

Taschenbuch. Zustand: Neu. Innovation in Product Design | From CAD to Virtual Prototyping | Monica Bordegoni (u. a.) | Taschenbuch | xiv | Englisch | 2014 | Springer | EAN 9781447161875 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Innovation in Product Design gives an overview of the research fields and achievements in the development of methods and tools for product design and innovation. It presents contributions from experts in many different fields covering a variety of research topics related to product development and innovation. Product lifecycle management, knowledge management, product customization, topological optimization, product virtualization, systematic innovation, virtual humans, design and engineering, and rapid prototyping are the key research areas described in the book. It also details successful case studies developed with industrial companies.Innovation in Product Design is written for academic researchers, graduate students and professionals in product development disciplines who are interested in understanding how novel methodologies and technologies can make the product development process more efficient.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Innovation in Product Design gives an overview of the research fields and achievements in the development of methods and tools for product design and innovation. It presents contributions from experts in many different fields covering a variety of research topics related to product development and innovation. Product lifecycle management, knowledge management, product customization, topological optimization, product virtualization, systematic innovation, virtual humans, design and engineering, and rapid prototyping are the key research areas described in the book. It also details successful case studies developed with industrial companies.Innovation in Product Design is written for academic researchers, graduate students and professionals in product development disciplines who are interested in understanding how novel methodologies and technologies can make the product development process more efficient.

Zustand: Gut. Zustand: Gut | Seiten: 1684 | Sprache: Englisch | Produktart: Bücher | This book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2022), held on June 1¿3, 2022, in Ischia, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and collaborative and soft robotics. The book is organized into five main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 1684 | Sprache: Englisch | Produktart: Bücher | This book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2022), held on June 1¿3, 2022, in Ischia, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and collaborative and soft robotics. The book is organized into five main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.

Softcover. Zustand: gut. 2021. Advances on Mechanics, Design Engineering and Manufacturing III In deutscher Sprache. pages.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Design Tools and Methods in Industrial Engineering | Proceedings of the International Conference on Design Tools and Methods in Industrial Engineering, ADM 2019, September 9-10, 2019, Modena, Italy | Caterina Rizzi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xxiii | Englisch | 2019 | Springer | EAN 9783030311537 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Design Tools and Methods in Industrial Engineering IV | Proceedings of the Fourth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2024, September 11-13, 2024, Palermo, Italy, Volume 1 | Paolo Di Stefano (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xxi | Englisch | 2025 | Springer | EAN 9783031765964 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Design Tools and Methods in Industrial Engineering V | Proceedings of the Fifth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2025, September 3-5, 2025, Genova, Italy, Volume 2 | Giovanni Berselli (u. a.) | Taschenbuch | xx | Englisch | 2026 | Springer | EAN 9783032149497 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Design Tools and Methods in Industrial Engineering V | Proceedings of the Fifth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2025, September 3-5, 2025, Genova, Italy, Volume 1 | Giovanni Berselli (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xx | Englisch | 2026 | Springer | EAN 9783032149527 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2022), held on June 1-3, 2022, in Ischia, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and collaborative and soft robotics. The book is organized into five main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on cutting-edge design methods and tools in industrial engineering, advanced findings in mechanics and material science, and relevant technological applications. Topics span from geometric modelling tools to applications of virtual/augmented reality, from interactive design to ergonomics, human factors research and reverse engineering. Further topics include integrated design and optimization methods, as well as experimental validation techniques for product, processes and systems development, such as additive manufacturing technologies. This book is based on the International Conference on Design Tools and Methods in Industrial Engineering, ADM 2019, held on September 9-10, 2019, in Modena, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, and the Department of Engineering 'Enzo Ferrari' of the University of Modena and Reggio Emilia, Italy. It provides academics and professionals with a timely overview andextensive information on trends and technologies in industrial design and manufacturing.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book gathers original peer-reviewed papers reporting on innovative methods and tools in design, modeling, simulation and optimization, and their applications in engineering design, manufacturing, and other relevant industrial sectors. Based on contributions to the Fourth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2024, held on September 11-13, 2024, in Palermo, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, and the Department of Engineering of the University of Palermo, this first volume of a 2-volume set focuses on advances indesign for additive manufacturing, product design and engineering, design for sustainability and ecoDesign, experimental methods in product development and integrated methods for product and process design. Further topics include: simulation, analysis and optimization, design of collaborative and soft robots, geometrical product specification and tolerancing, and design methods for mobility. This book provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing.

Taschenbuch. Zustand: Neu. Design Tools and Methods in Industrial Engineering II | Proceedings of the Second International Conference on Design Tools and Methods in Industrial Engineering, ADM 2021, September 9-10, 2021, Rome, Italy | Caterina Rizzi (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xxiv | Englisch | 2021 | Springer | EAN 9783030912338 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book gathers original peer-reviewed papers reporting on innovative methods and tools in design, modeling, simulation and optimization, and their applications in engineering design, manufacturing, and other relevant industrial sectors. Based on contributions to the Fourth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2024, held on September 11-13, 2024, in Palermo, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, and the Department of Engineering of the University of Palermo, this second volume of a 2-volume set focuses on engineering methods in medicine, human factors and ergonomics, and reverse engineering. Further topics include: digital acquisition, image processing and inspection, virtual and augmented reality, virtual prototyping and digital twin, as well as engineering education, and knowledge and product data management. All in all, this book provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book gathers original peer-reviewed papers reporting on innovative methods and tools in design, modeling, simulation and optimization, and their applications in engineering design, manufacturing, and other relevant industrial sectors. Based on contributions to the Fifth International Conference on Design Tools and Methods in Industrial Engineering, ADM 2025, held on September 3 5, 2025, in Genova, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, this first volume of a 2-volume set focuses on advances in design for additive manufacturing, product design and engineering, design for sustainability and ecoDesign. Further topics include geometric dimensioning, tolerancing, and inspection, and engineering education. All in all, this book provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing.

Paperback. Zustand: Brand New. 1012 pages. 9.25x6.10x2.28 inches. In Stock.