rauch erwin (29 Ergebnisse)

1. Aufl. 347 S 22,5x14,5cm, OLn, geprägter Rücken, illustr. OU mit Läsuren, sauberer Buchzustand.

Zustand: New. In.

347, (1) S. Orig.-Leinenband mit Orig.-Umschlag. - Umschlag am Rücken und an den Rändern nachgedunkelt. Namenszug auf Vorsatz; ansonsten innen sauber. Gut erhaltenes Exemplar.

Zustand: New.

Zustand: New. George Katkov, Erwin Oberlaender, Nikolaus Poppe and Georg Von RauchFirst published in 1971 (in its English translation), Russia Enters the Twentieth Century provides a broad and detailed survey of Russia during the two decades leading up to th.

Zustand: New. In.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 376 | Sprache: Englisch | Produktart: Bücher | This book shows how companies can practically implement the advantages of Industry 4.0 and digitalization and also addresses the current challenges with regard to engineering education for Industry 4.0. In this book, we collect the contributions of the 1st Symposium on Industrial Engineering and Automation (ISIEA 2022), which took place from June 21¿22, 2022 at the Free University of Bolzano. The contributions cover three basic areas: (1) best practice examples and technical solutions for the implementation of Industry 4.0 in production and logistics, (2) management-oriented approaches for the digital transformation in companies, and (3) addressing Industry 4.0 in engineering education. The book targets different readers. Researchers find approaches to current research topics regarding Industry 4.0. Practitioners find valuable examples for technological implementations as well as management approaches for introducing digitalization. Students and lecturers find hints on how Industry4.0 can be integrated into university teaching.

Zustand: New. In.

Zustand: New. In.

Zustand: new.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 596 | Sprache: Englisch | Produktart: Bücher | This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on smart and sustainable manufacturing. It describes innovative research in design engineering and manufacturing technology, covering the development and characterization of advanced materials alike. It also discusses key aspects related to ICT in engineering education. Based on the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 7-10, 2022, in Poznan, Poland, this first volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.

Taschenbuch. Zustand: Neu. Managing and Implementing the Digital Transformation | Proceedings of the 1st International Symposium on Industrial Engineering and Automation ISIEA 2022 | Dominik T. Matt (u. a.) | Taschenbuch | Lecture Notes in Networks and Systems | x | Englisch | 2022 | Springer | EAN 9783031143168 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Buch. Zustand: Neu. Neuware - First published in 1971 (in its English translation), Russia Enters the Twentieth Century provides a broad and detailed survey of Russia during the two decades leading up to the revolution. An international team of scholars examines each significant aspect of Russian life to create a comprehensive portrait of Russia under Nicholas II (1894-1917), free from the myths imposed by historians who, on both sides, have tended to interpret it through the lens of the revolution that followed, rather than studying it objectively as a distinct period. This work serves as an important historical reference for students and researchers of Russian history.

Taschenbuch. Zustand: Neu. Manufacturing 2030 - A Perspective to Future Challenges in Industrial Production | Proceedings of the 4th International Symposium on Industrial Engineering and Automation ISIEA 2025 and 18th EPIEM Conference 2025, Volume 1 | Dominik T. Matt (u. a.) | Taschenbuch | Lecture Notes in Networks and Systems | x | Englisch | 2025 | Springer | EAN 9783032036971 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Manufacturing 2030 - A Perspective to Future Challenges in Industrial Production | Proceedings of the 4th International Symposium on Industrial Engineering and Automation ISIEA 2025 and 18th EPIEM Conference 2025, Volume 2 | Dominik T. Matt (u. a.) | Taschenbuch | Lecture Notes in Networks and Systems | x | Englisch | 2025 | Springer | EAN 9783032037213 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book shows how companies can practically implement the advantages of Industry 4.0 and digitalization and also addresses the current challenges with regard to engineering education for Industry 4.0. In this book, we collect the contributions of the 1st Symposium on Industrial Engineering and Automation (ISIEA 2022), which took place from June 21-22, 2022 at the Free University of Bolzano. The contributions cover three basic areas: (1) best practice examples and technical solutions for the implementation of Industry 4.0 in production and logistics, (2) management-oriented approaches for the digital transformation in companies, and (3) addressing Industry 4.0 in engineering education. The book targets different readers. Researchers find approaches to current research topics regarding Industry 4.0. Practitioners find valuable examples for technological implementations as well as management approaches for introducing digitalization. Students and lecturers find hints on how Industry4.0 can be integrated into university teaching.

Taschenbuch. Zustand: Neu. Advances in Design, Simulation and Manufacturing VII | Proceedings of the 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2024, June 4-7, 2024, Pilsen, Czech Republic - Volume 1: Manufacturing Engineering | Vitalii Ivanov (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xix | Englisch | 2024 | Springer | EAN 9783031617966 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers practical insights into implementing Industry 4.0 technologies and exploring the evolving paradigm of Industry 5.0. It presents real-world applications, innovative engineering solutions, and strategies for integrating digital tools into production and management practices. Based on contributions from ISIEA 2025 and EPIEM 2025, the book spans topics from supply chain optimization to advanced human-centric manufacturing and engineering design. It introduces novel perspectives on merging technical and managerial approaches and highlights the educational challenges of aligning curricula with industrial innovation. Intended for researchers, professionals, and academics, it serves as both a reference for ongoing developments and a guide for incorporating cutting-edge technologies and concepts into teaching and practice.

Taschenbuch. Zustand: Neu. Advances in Design, Simulation and Manufacturing VI | Proceedings of the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2023, June 6-9, 2023, High Tatras, Slovak Republic - Volume 1: Manufacturing Engineering | Vitalii Ivanov (u. a.) | Taschenbuch | xvi | Englisch | 2023 | Springer | EAN 9783031327667 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Advances in Design, Simulation and Manufacturing V | Proceedings of the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2022, June 7-10, 2022, Poznan, Poland - Volume 1: Manufacturing and Materials Engineering | Vitalii Ivanov (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | xx | Englisch | 2022 | Springer | EAN 9783031060243 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book offers practical insights into implementing Industry 4.0 technologies and exploring the evolving paradigm of Industry 5.0. It presents real-world applications, innovative engineering solutions, and strategies for integrating digital tools into production and management practices. Based on contributions from ISIEA 2025 and EPIEM 2025, the book spans topics from supply chain optimization to advanced human-centric manufacturing and engineering design. It introduces novel perspectives on merging technical and managerial approaches and highlights the educational challenges of aligning curricula with industrial innovation. Intended for researchers, professionals, and academics, it serves as both a reference for ongoing developments and a guide for incorporating cutting-edge technologies and concepts into teaching and practice.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on advances in manufacturing, with a special emphasis on smart manufacturing and information management systems. It covers sensors, machine vision systems, collaborative technologies, industrial robotics, digital twins, and virtual and mixed reality. Further topics include quality management, supply chain, agile manufacturing, lean management, and sustainable transportation. Chapters report on theoretical research and experimental studies concerning engineering design, simulation, and various machining processes forsubtractiveand additive manufacturing. It also discusses key aspects related to engineering education and competence management in the Industry 4.0 era. Based on the 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2024), held on June 4-7, 2024, in Pilsen, Czech Republic, this first volume of a 2-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned areas.

Paperback. Zustand: Brand New. 350 pages. 9.26x6.11x9.21 inches. In Stock.

Paperback. Zustand: Brand New. 350 pages. 9.26x6.11x9.25 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on advances in manufacturing, with a special emphasis on smart manufacturing and information management systems. It coverssensors, machine vision systems, collaborative technologies, industrial robotics, digital twins, and virtual and mixed reality. Further topics include quality management, supply chain, agile manufacturing, lean management, and sustainable transportation. Chapters report on theoretical research and experimental studies concerning engineeringdesign, simulation, and various machining processes for classical and additive manufacturing. They also discusses key aspects related to engineering education and competence management in the industry 4.0 era.Based on the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 6-9, 2023, in High Tatras, Slovak Republic,this first volume of a 2-volume set provides academics and professionals with extensive information ontrends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on smart and sustainable manufacturing. It describes innovative research in design engineering and manufacturing technology, covering the development and characterization of advanced materials alike. It also discusses key aspects related to ICT in engineering education. Based on the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 7-10, 2022, in Poznan, Poland, this first volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.

Paperback. Zustand: Brand New. 429 pages. 9.25x6.10x0.88 inches. In Stock.

Paperback. Zustand: Brand New. 450 pages. 9.25x6.10x9.21 inches. In Stock.