rajkumar patil (19 Ergebnisse)

Zustand: Like New. Most items will be dispatched the same or the next working day. An apparently unread copy in perfect condition. Dust cover is intact with no nicks or tears. Spine has no signs of creasing. Pages are clean and not marred by notes or folds of any kind.

Zustand: New.

Taschenbuch. Zustand: Sehr gut. Gebraucht - Sehr gut SG - leichte Beschädigungen oder Verschmutzungen, ungelesenes Mängelexemplar, gestempelt - The objective of present research is to study the effect of different specimen dimensions on the modulus of rigidity, yield shear stress and ultimate shear stress for AISI 1020 steel and Al T6 6061. The experiments are conducted with key specimen dimensions such as total length, outer diameter, inner diameter, useful length and fillet radius at different levels for solid and hollow specimens. The Taguchi parameter design and optimization approach is used for Design of Experiment and subsequently to predict sets of optimal parameters. The Grey Relational Analysis (GRA) method has been used for multi-objective optimization.

Taschenbuch. Zustand: Neu. Neuware -The present automation system comes in to existence through its various stages. In the past, System is done through relay and contactor logics. Since the human intervention is more, the scope of errors was also more. But with the advent of microprocessors several new tools as PLC¿s, SCADA and DCS come in to use. These have reduced human intervention, which in turn has increased accuracy, precision and efficiency. This case study deals with the incidental release of toxic chlorine gas from the chlorine charging station to chlorine reactor in colour pigment manufacturing industry. The probable causes of the accidents are due to manual handling of toxic gases. The analysis and design of system is to be done identify the possible errors and the unsafe activities and take safe preventive measures. It is a great opportunity to learn and design a safer plant in the future. The used toxic gases are controlled by Programmable logic Controller (PLC) using Integrated Mechatronics approach for the automation of processes.Books on Demand GmbH, Überseering 33, 22297 Hamburg 100 pp. Englisch.

Paperback. Zustand: Brand New. 100 pages. 8.66x5.91x0.23 inches. In Stock.

Taschenbuch. Zustand: Neu. Neuware -The objective of present research is to study the effect of different specimen dimensions on the modulus of rigidity, yield shear stress and ultimate shear stress for AISI 1020 steel and Al T6 6061. The experiments are conducted with key specimen dimensions such as total length, outer diameter, inner diameter, useful length and fillet radius at different levels for solid and hollow specimens. The Taguchi parameter design and optimization approach is used for Design of Experiment and subsequently to predict sets of optimal parameters. The Grey Relational Analysis (GRA) method has been used for multi-objective optimization.Books on Demand GmbH, Überseering 33, 22297 Hamburg 116 pp. Englisch.

Zustand: New.

Taschenbuch. Zustand: Neu. Neuware -I am glade to present this book for JEE Main Student and I believe that this book will work as Rank Booster in there Exam. I hope, this book will help student to improve there JEE Mains Rank. Best Luck !! Joint Entrance Exam (JEE) is the biggest Engineering Entrance exam in India which is conducted with a motive of selecting candidates to get admissions in various Engineering Institutions in India.Books on Demand GmbH, Überseering 33, 22297 Hamburg 160 pp. Englisch.

Zustand: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher.

Zustand: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher.

Taschenbuch. Zustand: Neu. Neuware -El objetivo de la presente investigación es estudiar el efecto de las diferentes dimensiones de las probetas sobre el módulo de rigidez, el esfuerzo cortante de fluencia y el esfuerzo cortante último del acero AISI 1020 y el Al T6 6061. Los experimentos se llevan a cabo con dimensiones clave de las probetas, como la longitud total, el diámetro exterior, el diámetro interior, la longitud útil y el radio de redondeo en diferentes niveles para probetas macizas y huecas. El enfoque de diseño y optimización de parámetros de Taguchi se utiliza para el diseño de experimentos y, posteriormente, para predecir conjuntos de parámetros óptimos. El método de Análisis Relacional Gris (GRA) se ha utilizado para la optimización multiobjetivo.Books on Demand GmbH, Überseering 33, 22297 Hamburg 108 pp. Spanisch.

Zustand: New.

Taschenbuch. Zustand: Neu. Neuware -L'objectif de cette recherche est d'étudier l'effet de différentes dimensions d'échantillons sur le module de rigidité, la contrainte de cisaillement d'écoulement et la contrainte de cisaillement ultime pour l'acier AISI 1020 et l'Al T6 6061. Les expériences sont menées avec des dimensions d'échantillons clés telles que la longueur totale, le diamètre extérieur, le diamètre intérieur, la longueur utile et le rayon de congé à différents niveaux pour les échantillons pleins et creux. L'approche Taguchi de conception et d'optimisation des paramètres est utilisée pour la conception de l'expérience et ensuite pour prédire les ensembles de paramètres optimaux. La méthode de l'analyse relationnelle grise (GRA) a été utilisée pour l'optimisation multi-objectifs.Books on Demand GmbH, Überseering 33, 22297 Hamburg 108 pp. Französisch.

Zustand: New.

Taschenbuch. Zustand: Neu. Neuware -O objectivo da presente investigação é estudar o efeito de diferentes dimensões dos provetes no módulo de rigidez, na tensão de ruptura e na tensão de ruptura final do aço AISI 1020 e do Al T6 6061. As experiências são conduzidas com as principais dimensões dos provetes, tais como o comprimento total, o diâmetro exterior, o diâmetro interior, o comprimento útil e o raio de filete a diferentes níveis para provetes sólidos e ocos. A abordagem de optimização e concepção de parâmetros de Taguchi é utilizada para a concepção de experiências e, subsequentemente, para prever conjuntos de parâmetros óptimos. O método de análise relacional cinzenta (GRA) foi utilizado para a optimização multiobjectivo.Books on Demand GmbH, Überseering 33, 22297 Hamburg 108 pp. Portugiesisch.

Taschenbuch. Zustand: Neu. Neuware -Ziel der vorliegenden Untersuchung ist es, die Auswirkungen verschiedener Probenabmessungen auf den Steifigkeitsmodul, die Streckschubspannung und die Bruchschubspannung für AISI 1020 Stahl und Al T6 6061 zu untersuchen. Die Experimente werden mit den wichtigsten Probenabmessungen wie Gesamtlänge, Außendurchmesser, Innendurchmesser, Nutzlänge und Ausrundungsradius auf verschiedenen Ebenen für massive und hohle Proben durchgeführt. Die Taguchi-Parameterplanung und -Optimierung wird für die Versuchsplanung und anschließend für die Vorhersage der optimalen Parameter verwendet. Die Methode der Grauen Relativitätsanalyse (GRA) wurde für die Mehrzieloptimierung verwendet.Books on Demand GmbH, Überseering 33, 22297 Hamburg 108 pp. Deutsch.

Taschenbuch. Zustand: Neu. Neuware -L'obiettivo della presente ricerca è studiare l'effetto delle diverse dimensioni dei provini sul modulo di rigidità, sullo sforzo di taglio di snervamento e sullo sforzo di taglio ultimo per l'acciaio AISI 1020 e l'Al T6 6061. Gli esperimenti sono stati condotti con dimensioni chiave dei provini quali lunghezza totale, diametro esterno, diametro interno, lunghezza utile e raggio di raccordo a diversi livelli per i provini pieni e cavi. L'approccio di progettazione e ottimizzazione dei parametri di Taguchi viene utilizzato per la progettazione degli esperimenti e successivamente per prevedere i set di parametri ottimali. Il metodo dell'analisi relazionale grigia (GRA) è stato utilizzato per l'ottimizzazione multi-obiettivo.Books on Demand GmbH, Überseering 33, 22297 Hamburg 108 pp. Italienisch.

Taschenbuch. Zustand: Neu. Einfluss der Probengeometrie auf die Ergebnisse der Torsionsprüfung | Rajkumar Patil (u. a.) | Taschenbuch | Paperback | 108 S. | Deutsch | 2023 | Verlag Unser Wissen | EAN 9786205995761 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu.