pradeep kumar yadav (32 Ergebnisse)

PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Taschenbuch. Zustand: Neu. Neuware -Wheat (Triticum aestivum L.) is the world¿s most staple food crop as well as most consumed cereal. Several biotic and abiotic factors cause yield loss of wheat production. Among several pathogens damaging wheat crop, rust pathogens are the most prevalent. They are reported from all wheat growing countries and causes a severe damage to the wheat production worldwide. There are three types of rust majorly affect wheat production in India: leaf rust caused by Puccinia recondita, stem rust by Puccinia graminis triticii and stripe rust by Puccinia striformis. Identification of rust resistant genotypes and further utilization of these genotypes in wheat breeding programme is one of the prive objective in wheat improvement programme. An experiment was conducted consisted of 41 diverse genotypes of wheat (Triticum aestivum L.), 10 NGSN lines (National Genetic Stock Nursary), 14 F1 were selected for the study and F2 population of HS599 X Sonalika, HS599 X Raj 4480, HS 599 X GW 2013-491 were selected for the study during rabi 2018-19 and 2019-20.Books on Demand GmbH, Überseering 33, 22297 Hamburg 152 pp. Englisch.

Taschenbuch. Zustand: Neu. Inheritance study of agronomical traits and characterization | for bread wheat (Tritium aestivum L.) | Pradeep Kumar Yadav (u. a.) | Taschenbuch | Englisch | 2023 | LAP LAMBERT Academic Publishing | EAN 9786206183846 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Identification of stable wheat genotypes using AMMI Model | and diversity assessment for rust resistance using marker assisted selection | Pradeep Kumar Yadav (u. a.) | Taschenbuch | Englisch | 2024 | LAP LAMBERT Academic Publishing | EAN 9786207464548 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Identification of stable wheat genotypes using AMMI Model | and diversity assessment for rust resistance using marker assisted selection | Pradeep Kumar Yadav (u. a.) | Taschenbuch | Englisch | 2024 | LAP LAMBERT Academic Publishing | EAN 9786207485529 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Neuware -Higher heritability coupled with high genetic advance was recorded for biological yield per plant, grain yield per plant indicating that these characters are governed by additive gene action and hence direct selection for these traits will increase grain yield through genetic improvement in wheat. Significant positive correlation was observed for grain yield/plant with biological yield/plant, harvest index, spike length, spike weight, number grains per spike, number of tillers per plant. Hence selection for these characters may be utilized for the improvement of grain yield.The genotypes from clusters VI and IV, cluster VIII and III, cluster VIII and VII, cluster VII and V are used for crossing.The advanced breeding lines TAW 155 and RVW 7007 have stable yield and its componentwhich are produced using the stability model i.e., Elbert and Russell model & AMMI model.Out of 34 genotypes, TAW 155 and RVW 2019-26 lines have high content for protein, total sugar, non reducing sugar, reducing sugar, wet gluten and dry gluten.Books on Demand GmbH, Überseering 33, 22297 Hamburg 268 pp. Englisch.

Taschenbuch. Zustand: Neu. Neuware -Higher heritability coupled with high genetic advance was recorded for biological yield per plant, grain yield per plant, indicating that these characters are governed by additive gene action and hence direct selection for these traits will increase grain yield through genetic improvement in wheat. Significant positive correlation was observed for grain yield/plant with biological yield/plant, harvest index, spike length, spike weight, number of grains per spike, number of tillers per plant. Hence, selection for these characters may be utilized for the improvement of grain yield. The cluster II has plant height and peduncle lengths, cluster III spike length, cluster IV days to 50% heading and days to 50% flowering, cluster VI number of tillers per plant, spike weight, 1000 seed weight, biological yield per plant grain yield per plant, grains filling period and days to maturity and cluster VII number of grains per spike and harvest index, cluster VIII flag leaf areas and spike weight. The genotypes from clusters VI and IV, cluster VIII and III, cluster VIII and VII, cluster VII and V are used for crossing.Books on Demand GmbH, Überseering 33, 22297 Hamburg 276 pp. Englisch.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 436 | Sprache: Englisch | Produktart: Bücher | This book presents the select proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS 2020). It presents the current scenarios and future advancements in the domain of industrial engineering under context of optimum value. Various topics covered include optimisation and its applicability in the various areas of industrial engineering like selection of designing parameters and, decisions related to conditions of optimum process/operation parameters, facilities planning and management, transportation and supply chain management, quality engineering, reliability and maintenance, system optimization, product design and development, human factors and ergonomics, project management, service system and service management, waste management, sustainable manufacturing and operations, systems design, lean manufacturing, and performance measurement. This book will be useful for the students, researchers and professionals working in the area of industrial and production engineering.

Zustand: New.

Taschenbuch. Zustand: Neu. Neuware -This book presents the select proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS 2020). It presents the current scenarios and future advancements in the domain of industrial engineering under context of optimum value. Various topics covered include optimisation and its applicability in the various areas of industrial engineering like selection of designing parameters and, decisions related to conditions of optimum process/operation parameters, facilities planning and management, transportation and supply chain management, quality engineering, reliability and maintenance, system optimization, product design and development, human factors and ergonomics, project management, service system and service management, waste management, sustainable manufacturing and operations, systems design, lean manufacturing, and performance measurement. This book will be useful for the students, researchers and professionals working in the area of industrial and production engineering.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 436 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book presents the select proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS 2020). It presents the current scenarios and future advancements in the domain of industrial engineering under context of optimum value. Various topics covered include optimisation and its applicability in the various areas of industrial engineering like selection of designing parameters and, decisions related to conditions of optimum process/operation parameters, facilities planning and management, transportation and supply chain management, quality engineering, reliability and maintenance, system optimization, product design and development, human factors and ergonomics, project management, service system and service management, waste management, sustainable manufacturing and operations, systems design, lean manufacturing, and performance measurement. This book will be useful for the students, researchers and professionals working in the area of industrial and production engineering.

Taschenbuch. Zustand: Neu. Neuware -This book comprises select proceedings of the International Conference on Production and Industrial Engineering (CPIE) 2018. The book focuses on the latest developments in the domain of operations management and systems engineering, and presents analytical models, case studies, and simulation approaches relevant to a wide variety of systems engineering problems. Topics such as decision sciences, human factors and ergonomics, transport and supply chain management, manufacturing design, operations research, waste management, modeling and simulation, reliability and maintenance, and sustainability in operations and manufacturing are discussed in this book. The contents of this book will be useful to academics, researchers and practitioners working in the field of systems engineering and operations management.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 260 pp. Englisch.

Buch. Zustand: Neu. Neuware -This book comprises select proceedings of the International Conference on Production and Industrial Engineering (CPIE) 2018. The book focuses on the latest developments in the domain of operations management and systems engineering, and presents analytical models, case studies, and simulation approaches relevant to a wide variety of systems engineering problems. Topics such as decision sciences, human factors and ergonomics, transport and supply chain management, manufacturing design, operations research, waste management, modeling and simulation, reliability and maintenance, and sustainability in operations and manufacturing are discussed in this book. The contents of this book will be useful to academics, researchers and practitioners working in the field of systems engineering and operations management.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 260 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book comprises select proceedings of the International Conference on Production and Industrial Engineering (CPIE) 2018. The book focuses on the latest developments in the domain of operations management and systems engineering, and presents analytical models, case studies, and simulation approaches relevant to a wide variety of systems engineering problems. Topics such as decision sciences, human factors and ergonomics, transport and supply chain management, manufacturing design, operations research, waste management, modeling and simulation, reliability and maintenance, and sustainability in operations and manufacturing are discussed in this book. The contents of this book will be useful to academics, researchers and practitioners working in the field of systems engineering and operations management.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book comprises select proceedings of the International Conference on Production and Industrial Engineering (CPIE) 2018. The book focuses on the latest developments in the domain of operations management and systems engineering, and presents analytical models, case studies, and simulation approaches relevant to a wide variety of systems engineering problems. Topics such as decision sciences, human factors and ergonomics, transport and supply chain management, manufacturing design, operations research, waste management, modeling and simulation, reliability and maintenance, and sustainability in operations and manufacturing are discussed in this book. The contents of this book will be useful to academics, researchers and practitioners working in the field of systems engineering and operations management.

Paperback. Zustand: Brand New. 260 pages. 9.25x6.10x0.62 inches. In Stock.

Buch. Zustand: Neu. Neuware -This book comprises select peer-reviewed contributions from the 6th International Conference on Production and Industrial Engineering (CPIE ¿ 2019). The volume focuses on latest research in the field of Industrial and Systems Engineering, and its allied areas. Articles on variety of topics such as Human Factors Engineering, Lean Manufacturing, Six Sigma, Logistics and Supply Chain Management, Operations Research, Quality Engineering, Measurement and Control, Reliability and Maintenance Engineering, Green Supply Chain Management, Modelling and Simulation, Sustainability, Technology Management, Agile and Flexible Manufacturing, Technology Management and Computer Aided Manufacturing are discussed in this book. Given the range of topics covered, the book will be useful for students, researchers, and professionals interested in different areas of Industrial and Systems Engineering.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 472 pp. Englisch.

Taschenbuch. Zustand: Neu. Neuware -This book comprises select peer-reviewed contributions from the 6th International Conference on Production and Industrial Engineering (CPIE ¿ 2019). The volume focuses on latest research in the field of Industrial and Systems Engineering, and its allied areas. Articles on variety of topics such as Human Factors Engineering, Lean Manufacturing, Six Sigma, Logistics and Supply Chain Management, Operations Research, Quality Engineering, Measurement and Control, Reliability and Maintenance Engineering, Green Supply Chain Management, Modelling and Simulation, Sustainability, Technology Management, Agile and Flexible Manufacturing, Technology Management and Computer Aided Manufacturing are discussed in this book. Given the range of topics covered, the book will be useful for students, researchers, and professionals interested in different areas of Industrial and Systems Engineering.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 472 pp. Englisch.

Hardcover. Zustand: Brand New. 260 pages. 9.25x6.10x0.79 inches. In Stock.

Zustand: New. InhaltsverzeichnisrnrnSection 1: Role of hazardous wastes and their environmental impacts 1. Hazardous wastes and the environment 2. Hazardous wastes treatment, storage, and disposal facilities Section 2: Waste management hierarchy 3. .

Zustand: New.

Zustand: New.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book comprises select peer-reviewed contributions from the 6th International Conference on Production and Industrial Engineering (CPIE - 2019). The volume focuses on latest research in the field of Industrial and Systems Engineering, and its allied areas. Articles on variety of topics such as Human Factors Engineering, Lean Manufacturing, Six Sigma, Logistics and Supply Chain Management, Operations Research, Quality Engineering, Measurement and Control, Reliability and Maintenance Engineering, Green Supply Chain Management, Modelling and Simulation, Sustainability, Technology Management, Agile and Flexible Manufacturing, Technology Management and Computer Aided Manufacturing are discussed in this book. Given the range of topics covered, the book will be useful for students, researchers, and professionals interested in different areas of Industrial and Systems Engineering.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book comprises select peer-reviewed contributions from the 6th International Conference on Production and Industrial Engineering (CPIE - 2019). The volume focuses on latest research in the field of Industrial and Systems Engineering, and its allied areas. Articles on variety of topics such as Human Factors Engineering, Lean Manufacturing, Six Sigma, Logistics and Supply Chain Management, Operations Research, Quality Engineering, Measurement and Control, Reliability and Maintenance Engineering, Green Supply Chain Management, Modelling and Simulation, Sustainability, Technology Management, Agile and Flexible Manufacturing, Technology Management and Computer Aided Manufacturing are discussed in this book. Given the range of topics covered, the book will be useful for students, researchers, and professionals interested in different areas of Industrial and Systems Engineering.

Paperback. Zustand: Brand New. 470 pages. 9.25x6.10x1.11 inches. In Stock.

Zustand: New.

Taschenbuch. Zustand: Neu. Neuware - Hazardous Waste Management: An Overview of Advanced and Cost-Effective Solutions includes the latest practical knowledge and theoretical concepts for the treatment of hazardous wastes. The book covers five major themes, namely, ecological impact, waste management hierarchy, hazardous waste characteristics and regulations, hazardous wastes management, and future scope of hazardous waste management. It serves as a comprehensive and advanced reference for undergraduate students, researchers and practitioners in the field of hazardous wastes and focuses on the latest emerging research in the management of hazardous waste, the direction in which this branch is developing as well as future prospects.

Taschenbuch. Zustand: Neu. Neuware -Se registró una mayor heredabilidad junto con un alto avance genético para el rendimiento biológico por planta y el rendimiento de grano por planta, lo que indica que estos caracteres se rigen por la acción genética aditiva y, por lo tanto, la selección directa de estos rasgos aumentará el rendimiento de grano a través del mejoramiento genético en el trigo. Se observó una correlación positiva significativa para el rendimiento de grano/planta con el rendimiento biológico/planta, índice de cosecha, longitud de espiga, peso de espiga, número de granos por espiga, número de macollos por planta. Por lo tanto, la selección de estos caracteres puede utilizarse para mejorar el rendimiento del grano. El grupo II tiene altura de planta y longitud de pedúnculo, grupo III longitud de espiga, grupo IV días hasta 50% de espigado y días hasta 50% de floración, grupo VI número de macollos por planta, peso de espiga, peso de 1000 semillas, rendimiento biológico por planta rendimiento de grano por planta, período de llenado de granos y días a madurez y número de granos por espiga e índice de cosecha del racimo VII, área de hojas bandera del racimo VIII y peso de espiga. Para el cruce se utilizan los genotipos de los grupos VI y IV, de los grupos VIII y III, de los grupos VIII y VII, de los grupos VII y V.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 324 pp. Spanisch.

Taschenbuch. Zustand: Neu. Neuware -Une héritabilité plus élevée associée à un progrès génétique élevé a été enregistrée pour le rendement biologique par plante et le rendement en grains par plante, ce qui indique que ces caractères sont régis par l'action additive des gènes et que, par conséquent, la sélection directe de ces caractères augmentera le rendement en grains grâce à l'amélioration génétique du blé. Une corrélation positive significative a été observée pour le rendement en grains/plante avec le rendement biologique/plante, l'indice de récolte, la longueur des épis, le poids des épis, le nombre de grains par épi, le nombre de talles par plante. Par conséquent, la sélection de ces caractères peut être utilisée pour améliorer le rendement en grains. Le groupe II comprend la hauteur des plantes et la longueur des pédoncules, la longueur des épis du groupe III, les jours du groupe IV jusqu'à 50 % d'épiaison et les jours jusqu'à 50 % de floraison, le nombre de talles du groupe VI par plante, le poids des épis, le poids de 1 000 graines, le rendement biologique par plante, le rendement en grains. par plante, la période de remplissage des grains et les jours jusqu'à maturité et le nombre de grains du groupe VII par épi et l'indice de récolte, la superficie des feuilles étendards du groupe VIII et le poids des épis. Les génotypes des groupes VI et IV, groupes VIII et III, groupes VIII et VII, groupes VII et V sont utilisés pour le croisement.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 336 pp. Französisch.

Zustand: New.