pluvinage guy (43 Ergebnisse)

Softcover. Zustand: Très bon. Ancien livre de bibliothèque avec équipements. Edition 2005. Ammareal reverse jusqu'à 15% du prix net de cet article à des organisations caritatives. ENGLISH DESCRIPTION Book Condition: Used, Very good. Former library book. Edition 2005. Ammareal gives back up to 15% of this item's net price to charity organizations.

Paperback. Zustand: Good. Naam op titelpagina / Name on title page, Omslag wat verkleurd / Cover discoloured French Guy Moyse, 37 ans, journaliste depuis 15 ans, dont 10 passés à Besançon. A découvert successivement le mensuel, l'hebdomadaire, le quotidien, puis est passé de la presse écrite à la radio. Depuis 3 ans, il est responsable du bureau d'Europe 1 à Lyon. Ce qui lui permet de revenir souvent en Franche-Comté. Une région qu'il a découverte dans le détail, par nécessité professionnelle, au gré de ses reportages. Découverte dictée aussi par le désir de mieux connaître « son pays » : Guy Moyse est né sur les hautes chaînes du Jura, au c?ur des sapins. Il reste d'ailleurs persuadé qu'au-delà des apparences, souvent très belles, cette regio est d'abord un état d'esprit. TABLE DES MATIÈRES INTRODUCTION ITINÉRAIRES PÉDESTRES Itinéraire n° 1 : Dans la vallée de la Jougnenaz (Doubs). 15 km Itinéraire n° 2 : Autour du lac de Remoray (Doubs). 16 km Itinéraire n° 3 : Des bassins au Saut-du-Doubs (Doubs). 7 km Itinéraire n° 4 : Découverte de la forêt de Chailluz (Doubs). 13 km Itinéraire n° 5 : Sur les monts de Revigny (Jura). 12 km Itinéraire n° 6 : En remontant le Cusancin (Doubs). 28 km Itinéraire n° 7 : De Baume-les-Dames à Besançon (Doubs). 38 km Itinéraire n° 8 : Montfaucon et les grandes terres (Doubs). 13 km Itinéraire n° 9 : Vieilles pierres du vieux Besançon (Doubs). 9 km Itinéraire n° 10 : Jusqu'aux sources de la Loue (Doubs). 14 km Itinéraire n° 11 : La marche des forts (Doubs). 18 km Itinéraire n° 12 : Randonnée au « bon pays » (Jura). 16 km Itinéraire n° 13 : Sous les chênes de la forêt de Chaux (Jura). 28 km Itinéraire n° 14 : Sur les bords de l'Ognon (Haute-Saône). 19 km Itinéraire n° 15 : De Pesmes à Gray, les Comtoises (Haute-Saône). 30 km Itinéraire n° 16 : Dans la république du Saugeais (Doubs). 30 km Itinéraire n° 17 : Chez les Grandvalliers (Jura). 25 km Itinéraire n° 18 : Circuit du vin et du sel (Jura). 42 km Itinéraire n° 19 : Flânerie dans le Val d'Amour (Jura). 45 km Itinéraire n° 20 : Sept jours au pays des lacs (Jura). 160 km Itinéraire n° 21 : Sept jours au pays des sapins (Doubs-Jura). 110 km ITINERAIRE A SKIS Itinéraire n° 22 : Sept jours skis aux pieds (Doubs-Jura). 120 km ITINERAIRES CYCLISTES Itinéraire n° 23 : A vélo sur le premier plateau (Doubs). 80 km Itinéraire n° 24 : En jouant avec le Doubs (Doubs). 70 km Itinéraire n° 25 : La boucle de Pontarlier (Doubs). 70 km Itinéraire n° 26 : Dans la sapinière de Joux (Doubs-Jura). 70 km INDEX DES LOCALITES CITEES.

Zustand: BUONO USATO. Francese Brossura editoriale in cartoncino flessibile lucido, dalla copertina illustrata. Buonissimo lo stato di conservazione, pagine perfettamente tenute, ossidate da tonalità seppia, come i tagli, ricche di grafici, calcoli, illustrazioni e tabelle , nel testo. Numero pagine 319.

Zustand: New. In.

Zustand: New. In.

Zustand: Very Good. Former library copy. Pages intact with possible writing/highlighting. Binding strong with minor wear. Dust jackets/supplements may not be included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.

Zustand: Like New. Used - Like New. Book is new and unread but may have minor shelf wear. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 349 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Taschenbuch. Zustand: Neu. Fracture at all Scales | Guy Pluvinage (u. a.) | Taschenbuch | Lecture Notes in Mechanical Engineering | viii | Englisch | 2018 | Springer | EAN 9783319813332 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book is a compilation of selected papers from the 2014 New Trends in Fatigue and Fracture (NT2F14) Conference, which was held in Belgrade, Serbia. This prestigious conference brought together delegates from around the globe to discuss how to characterize, predict and analyze the fatigue and fracture of engineering materials, components, and structures using theoretical, experimental, numerical and practical approaches.It highlights some important new trends in fracture mechanics presented at the conference, such as:- two-parameter fracture mechanics, arising from the coupling of fracture toughness and stress constraints- high-performance steel for gas and oil transportation and production (pressure vessels and boilers)- safety and reliability of welded joints This book includes 12 contributions from well-known international scientists and a special tribute dedicatedto the scientific contributions of Stojan Sedmark, who passed away in 2014.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book is a compilation of selected papers from the 2014 New Trends in Fatigue and Fracture (NT2F14) Conference, which was held in Belgrade, Serbia. This prestigious conference brought together delegates from around the globe to discuss how to characterize, predict and analyze the fatigue and fracture of engineering materials, components, and structures using theoretical, experimental, numerical and practical approaches.It highlights some important new trends in fracture mechanics presented at the conference, such as:- two-parameter fracture mechanics, arising from the coupling of fracture toughness and stress constraints- high-performance steel for gas and oil transportation and production (pressure vessels and boilers)- safety and reliability of welded joints This book includes 12 contributions from well-known international scientists and a special tribute dedicatedto the scientific contributions of Stojan Sedmark, who passed away in 2014.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 428 | Sprache: Englisch | Produktart: Bücher | Structures that are essential for economy and security such as energy production, transportation and supply, water supply, buildings, are susceptible to failure, because of defects already present in the material, or created at fabrication, or appearing during service. Methods of assesment of the nocivity of these defects are needed, to predict the remaining service life and the eventual emergency of stopping service and repairing, if possible. To reach this objectives, this book presents the last methods derived from the classical linear, non-linear fracture mechanics concepts, including fatigue and notch fracture mechanics. Several examples of structures rehabilitations and repairing are given.This book gathers the presentation made during the Advanced Research Workshop held in Portoroz (Slovenia) in October 2008, under the auspices of NATO Science for Peace and Security Programme. It is edited by Professor Guy Pluvinage from the University Paul Verlaine ¿ Metz (France) and Professor Aleksandar Sedmak from the University of Belgrade, Faculty of Mechanical Engineering. Both have a long and rich experience in analysis of theoretical and practical cases in safety and reliability of structures. Other contributors are all known as experts in the areas of fatigue, facture and reliability of structures.

Gebunden. Zustand: New.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 418 | Sprache: Englisch | Produktart: Bücher | Structures that are essential for economy and security such as energy production, transportation and supply, water supply, buildings, are susceptible to failure, because of defects already present in the material, or created at fabrication, or appearing during service. Methods of assesment of the nocivity of these defects are needed, to predict the remaining service life and the eventual emergency of stopping service and repairing, if possible. To reach this objectives, this book presents the last methods derived from the classical linear, non-linear fracture mechanics concepts, including fatigue and notch fracture mechanics. Several examples of structures rehabilitations and repairing are given.This book gathers the presentation made during the Advanced Research Workshop held in Portoroz (Slovenia) in October 2008, under the auspices of NATO Science for Peace and Security Programme. It is edited by Professor Guy Pluvinage from the University Paul Verlaine - Metz (France) and Professor Aleksandar Sedmak from the University of Belgrade, Faculty of Mechanical Engineering. Both have a long and rich experience in analysis of theoretical and practical cases in safety and reliability of structures. Other contributors are all known as experts in the areas of fatigue, facture and reliability of structures.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 276 | Sprache: Englisch | Produktart: Bücher | This book is a compilation of selected papers from the 2014 New Trends in Fatigue and Fracture (NT2F14) Conference, which was held in Belgrade, Serbia. This prestigious conference brought together delegates from around the globe to discuss how to characterize, predict and analyze the fatigue and fracture of engineering materials, components, and structures using theoretical, experimental, numerical and practical approaches.It highlights some important new trends in fracture mechanics presented at the conference, such as:¿ two-parameter fracture mechanics, arising from the coupling of fracture toughness and stress constraints¿ high-performance steel for gas and oil transportation and production (pressure vessels and boilers)¿ safety and reliability of welded joints This book includes 12 contributions from well-known international scientists and a special tribute dedicated to the scientific contributions of Stojan Sedmark, who passed away in 2014.

Hardcover. Zustand: Brand New. 276 pages. 9.25x6.10x0.79 inches. In Stock.

Taschenbuch. Zustand: Neu. Damage and Fracture Mechanics | Failure Analysis of Engineering Materials and Structures | Taoufik Boukharouba (u. a.) | Taschenbuch | xxv | Englisch | 2014 | Springer Netherland | EAN 9789400791015 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: New. Proceedings of the NATO Advanced Research Workshop, held in Durres, Albania, May 7-10, 2000 Editor(s): Pluvinage, Guy; Gjonaj, Marenglen. Series: NATO Science Series II. Num Pages: 373 pages, biography. BIC Classification: TGMD5. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 240 x 160 x 19. Weight in Grams: 1160. . 2001. Softcover reprint of the original 1st ed. 2001. Paperback. . . . . Books ship from the US and Ireland.

Taschenbuch. Zustand: Neu. Safety, Reliability and Risks Associated with Water, Oil and Gas Pipelines | Guy Pluvinage (u. a.) | Taschenbuch | xi | Englisch | 2007 | Springer | EAN 9781402065255 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: New. Proceedings of the NATO Advanced Research Workshop, held in Durres, Albania, May 7-10, 2000 Editor(s): Pluvinage, Guy; Gjonaj, Marenglen. Series: NATO Science Series II. Num Pages: 373 pages, biography. BIC Classification: TGMD5. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 235 x 155 x 22. Weight in Grams: 703. . 2001. Hardback. . . . . Books ship from the US and Ireland.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 364 | Sprache: Englisch | Produktart: Bücher | Pipes are of major importance for transport of liquids and gas mainly for water, natural gas and oil. The total length of gas pipes in the world is estimated at one million kilometres for gas transport (pipes with a diameter of 80 to 1000 mm). Pipelines remain the least expensive transcontinental mean of transport compared to rail-bound or terrestrial transport. It has become increasingly paramount to ensure the safe utilisation of such plant in order to prevent economical, social and ecological losses. From a technical point of view, pipelines are complicated three dimensional structures that include straight pipes, nozzles, pipe-bends, dissimilar welded joints, etc. In addition, their operating conditions can be quite severe, that is, internal pressure and cyclic loading (vibration) combined with the influence of internal and external corrosive environments. The external defects, e.g., corrosion defects, gouge, foreign object scratches, and pipeline erection activities are major failure reasons of gas pipelines. All these types of defects and associated failure are described. Leak and fracture of pipes is assumed to be done by initiation and propagation of defect and final failure when defect has reached a critical length. In this book, the three two major defect assessment tools for pipes are presented : i) the failure assessment diagram and particularly the SINTAP procedure, ii) limit analysis, iii) strain design approach Methods of defect repair are based on investigation findings. Methods such as welded sleeve, repair clamp composite sleeve, grinding, pipe replacement are described.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 584 | Sprache: Englisch | Produktart: Bücher | This book covers a variety of topics in mechanics, with a special emphasis on material mechanics. It reports on fracture mechanics, fatigue of materials, stress-strain behaviours, as well as transferability problems and constraint effects in fracture mechanics. It covers different kind of materials, from metallic materials such as ferritic and austenitic steels, to composites, concrete, polymers and nanomaterials. Additional topics include heat transfer, quality control and reliability of structures and components. Furthermore, the book gives particular attention to new welding technologies such as STIR welding and spray metal coating, and to novel methods for quality control, such as Taguchi design, fault diagnosis and wavelet analysis. Based on the 2015 edition of the Algerian Congress of Mechanics (Congrès Algérien de Mécanique, CAM), the book also covers energetics, in terms of simulation of turbulent reactive flow, behaviour of supersonic jet, turbulent combustion, fire induced smoke layer, and heat and mass transfer, as well as important concepts related to human reliability and safety of components and structures. All in all, the book represents a complete, practice-oriented reference guide for both academic and professionals in the field of mechanics.