Sprache: Englisch
Verlag: American Society for Metals, 1978
ISBN 10: 0871700026 ISBN 13: 9780871700025
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Hardcover. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
Sprache: Englisch
Verlag: American Society for Metals, 1978
ISBN 10: 0871700026 ISBN 13: 9780871700025
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
Anbieter: Antiquariat Thomas Haker GmbH & Co. KG, Berlin, Deutschland
Verbandsmitglied: GIAQ
EUR 8,64
Anzahl: 1 verfügbar
In den WarenkorbPaperback. Zustand: Gut. XXXIV, 691 S. : Ill., graph. Darst. ; 24 cm, Bibl.-Ex., Guter Zustand. Einband leicht berieben. Sprache: Deutsch Gewicht in Gramm: 1325.
Zustand: Fine. *Price HAS BEEN REDUCED by 10% until Monday, June 15 (sale item)* 612 pp., Hardcover, two small nicks to spine, else fine. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country. Photos available upon request.
Sprache: Englisch
Verlag: Trans Tech Publications, Aedermannsdorf, Switzerland, 1994
ISBN 10: 0878496688 ISBN 13: 9780878496686
Anbieter: PsychoBabel & Skoob Books, Didcot, Vereinigtes Königreich
Erstausgabe
EUR 102,58
Anzahl: 1 verfügbar
In den Warenkorbpaperback. Zustand: Good. Zustand des Schutzumschlags: No Dust Jacket. First Edition. Numerous figures and tables, creasing to spine, minor chipping to head and tail of spine and corners of soft cover, light bump to head of spine, minor soiling to page block, previous owner's name on half-title page, text clean and tight. Used.
EUR 118,70
Anzahl: 15 verfügbar
In den WarenkorbHRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
Anbieter: Buchpark, Trebbin, Deutschland
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 582 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
EUR 135,04
Anzahl: 2 verfügbar
In den WarenkorbHardcover. Zustand: Brand New. 2nd edition. 240 pages. 9.50x6.50x1.00 inches. In Stock.
EUR 155,23
Anzahl: 3 verfügbar
In den WarenkorbZustand: New. pp. 240.
EUR 163,53
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. A reference for those working with metallographically prepared specimens for reflective light microscopy, supplying basic recipes that are easily reproducible in laboratories with less sophisticated equipment. Contains chapters on metallography, ceramography, and plastography (new to this edition), Num Pages: 200 pages, illustrations. BIC Classification: TDM. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (XV) Technical / Manuals. Dimension: 301 x 167 x 27. Weight in Grams: 516. . 1999. Subsequent. hardcover. . . . . Books ship from the US and Ireland.
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 497 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.
Sprache: Deutsch
Verlag: Frankfurt a.M. : Akademische Verlagsges., 1970
Anbieter: books4less (Versandantiquariat Petra Gros GmbH & Co. KG), Welling, Deutschland
gebundene Ausgabe. Zustand: Gut. XIV, 528 S. : Mit 292 Abb. u. 38 Tab. sowie 100 Aufgaben u. Lösungen ; Der Erhaltungszustand des hier angebotenen Werks ist trotz seiner Bibliotheksnutzung sehr sauber. Es befindet sich neben dem Rückenschild lediglich ein Bibliotheksstempel im Buch; ordnungsgemäß entwidmet. Sprache: Deutsch Gewicht in Gramm: 820.
Zustand: Fine. *Price HAS BEEN REDUCED by 10% until Monday, June 15 (sale item)* 624 pp., Hardcover, new. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country. Photos available upon request.
Anbieter: Buchpark, Trebbin, Deutschland
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 612 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.
Anbieter: Phatpocket Limited, Waltham Abbey, HERTS, Vereinigtes Königreich
EUR 251,92
Anzahl: 1 verfügbar
In den WarenkorbZustand: Like New. Used - Like New. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 492 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
EUR 262,54
Anzahl: 1 verfügbar
In den WarenkorbZustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1050grams, ISBN:9780792331193.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 311,13
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 311,13
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 311,13
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 311,13
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Anbieter: Buchpark, Trebbin, Deutschland
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 652 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 624 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.
Taschenbuch. Zustand: Neu. Tailoring of Mechanical Properties of Si3N4 Ceramics | Michael J. Hoffmann (u. a.) | Taschenbuch | xvii | Englisch | 2013 | Springer | EAN 9789401044301 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
EUR 338,28
Anzahl: Mehr als 20 verfügbar
In den WarenkorbGebunden. Zustand: New. Proceedings of the NATO Advanced Research Workshop on `Tailoring of High Temperature Properties of Si3N4 Ceramics , Schloss Ringberg/Munich, Germany, October 6--9, 1993 Preface. I: Processing and Densification F.F. Lange, E.P. Luther, J.G. Heinrich, .
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Significant progress has been made in recent years in developing silicon nitride ceramics. The advances that have been achieved are mainly based on an increasing understanding of processing and microstructure-properties relationships. New analytical methods and high resolution transmission electron microscopy (HRTEM) coupled with extensive phase equilibria studies have provided new insights into the grain boundary region and offer the possibility to tailor the microstructure for specific applications. Because of the anticipated break-through in industrial applications there are still considerablt; research activities at industrial laboratories as well as other research centres. This volume presents the contributions to the international workshop 'Tailoring ofHigh Temperature Properties of Si3N4-Ceramics' with 60 participants from 12 countries held on 6th - 9th October 1993 at SchloB Ringberg in Germany, the conference site of the Max Planck-Society. Additionally, it contains all invited papers of the International Conference 'Silicon Nitride 93' held before the workshop on 4th - 6th October 1993 in Stuttgart/Germany. The book covers all recent research activities on silicon nitride ceramics and gives an overview with respect to recent developments.
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Recent developments in advanced ceramics are critically evaluated in respect to their thermal shock and thermal fatigue behavior from an interdisciplinary viewpoint by leading experts. The book covers the aspects of material development, mechanical and fracture mechanical models and experimental testing methods. Special emphasis is given to the influence of a rising crack resistance on the thermal shock behavior, novel irradiation testing methods for a quantitative characterization of the thermal shock and fatigue loading as well as detailed fracture mechanical models for single and multiple crack propagation. This book summarizes developments of the last decade concerning the thermal shock and thermal fatigue behavior of advanced ceramics. The scientific articles of the book were carefully arranged in order to achieve a textbook-like form which will be of great value to researchers and students. (ABSTRACT) This book summarizes developments of the last decade concerning the thermal shock and thermal fatigue behavior of advanced ceramics. The book covers the aspects of material development, mechanical and fracture mechanical models and testing methods. The scientific articles were carefully arranged in order to achieve a textbook-like form which will be of great value to researchers and students.
Sprache: Englisch
Verlag: Springer Netherlands, Springer Netherlands, 1993
ISBN 10: 0792323610 ISBN 13: 9780792323617
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Recent developments in advanced ceramics are critically evaluated in respect to their thermal shock and thermal fatigue behavior from an interdisciplinary viewpoint by leading experts. The book covers the aspects of material development, mechanical and fracture mechanical models and experimental testing methods. Special emphasis is given to the influence of a rising crack resistance on the thermal shock behavior, novel irradiation testing methods for a quantitative characterization of the thermal shock and fatigue loading as well as detailed fracture mechanical models for single and multiple crack propagation. This book summarizes developments of the last decade concerning the thermal shock and thermal fatigue behavior of advanced ceramics. The scientific articles of the book were carefully arranged in order to achieve a textbook-like form which will be of great value to researchers and students. (ABSTRACT) This book summarizes developments of the last decade concerning the thermal shock and thermal fatigue behavior of advanced ceramics. The book covers the aspects of material development, mechanical and fracture mechanical models and testing methods. The scientific articles were carefully arranged in order to achieve a textbook-like form which will be of great value to researchers and students.
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
EUR 456,72
Anzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 612 pages. 9.25x6.10x1.38 inches. In Stock.
Buch. Zustand: Neu. Neuware - Significant progress has been made in recent years in developing silicon nitride ceramics. The advances that have been achieved are mainly based on an increasing understanding of processing and microstructure-properties relationships. New analytical methods and high resolution transmission electron microscopy (HRTEM) coupled with extensive phase equilibria studies have provided new insights into the grain boundary region and offer the possibility to tailor the microstructure for specific applications. Because of the anticipated break-through in industrial applications there are still considerablt; research activities at industrial laboratories as well as other research centres. This volume presents the contributions to the international workshop 'Tailoring ofHigh Temperature Properties of Si3N4-Ceramics' with 60 participants from 12 countries held on 6th - 9th October 1993 at SchloB Ringberg in Germany, the conference site of the Max Planck-Society. Additionally, it contains all invited papers of the International Conference 'Silicon Nitride 93' held before the workshop on 4th - 6th October 1993 in Stuttgart/Germany. The book covers all recent research activities on silicon nitride ceramics and gives an overview with respect to recent developments.