parab jivan (23 Ergebnisse)

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New.

Paperback. Zustand: Brand New. 186 pages. 9.18x6.12x0.55 inches. In Stock.

Zustand: New.

Einband - fest (Hardcover). Zustand: New. Dr. Jivan Shrikrishna Parab is Assistant Professor in the department of Electronics at Goa University, India. He completed his PhD from the same university with the thesis titled Development of Novel Embedded DSP Architecture for Non-Invasive Glucose An.

Hardcover. Zustand: Brand New. 1st edition. 157 pages. 9.25x6.25x0.50 inches. In Stock.

Buch. Zustand: Neu. Neuware -If we accept the premise that an embedded engineer is made rather than born, then how does one go about making a good one The authors ofthisbookExploring C for Microcontrollers: A Hands-on Approach are certainly ¿good ones¿. Not only do they explore some of the in uences thatshapedthemselvesbuttheyalsotrytoshape¿would-be¿embedded engineers. Research and developmental activities in embedded systems has grown in a signi cant proportion in the recent past. Embedded so- ware design is not new to the world, but with the changing time, it has gained considerable momentum in the recent past, and many young engineers are strongly inclined to pursue their future in this eld. The book is mainly targeted to these engineers who would like to understand in great depth the synergetic combination of hardware and software. The book is divided into eight chapters. Chapter 1 introduces a brief background about micro-controllers and explains how they are emb- dedintoproductscommerciallyavailableinthemarkettoemphasizethe importance of these in the daily life of mankind. It also gives an insight into the architectural details and embedded system concepts for s- dents¿ projects to motivate them into this exciting eld. The rest of the bookconcentratesonsoftwaredevelopment. Theintegrateddevelopment environment (IDE) is introduced in Chapter 2. Again the screen shots and step-by-step procedure will certainly make the students and en- neers fully understand the development process. Chapter 3 di eren- ates the embedded C paradigm from the conventional ANSI C. Again the authors explain how to successfully overcome the memory and time constraints while developing an embedded C program.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 176 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Second in the series, Practical Aspects of Embedded System Design using Microcontrollers emphasizes the same philosophy of 'Learning by Doing' and 'Hands on Approach' with the application oriented case studies developed around the PIC16F877 and AT 89S52, today's most popular microcontrollers. Readers with an academic and theoretical understanding of embedded microcontroller systems are introduced to the practical and industry oriented Embedded System design. When kick starting a project in the laboratory a reader will be able to benefit experimenting with the ready made designs and 'C' programs. One can also go about carving a big dream project by treating the designs and programs presented in this book as building blocks. Practical Aspects of Embedded System Design using Microcontrollers is yet another valuable addition and guides the developers to achieve shorter product development times with the use of microcontrollers in the days of increased software complexity. Going through the text and experimenting with the programs in a laboratory will definitely empower the potential reader, having more or less programming or electronics experience, to build embedded systems using microcontrollers around the home, office, store, etc. Practical Aspects of Embedded System Design using Microcontrollers will serve as a good reference for the academic community as well as industry professionals and overcome the fear of the newbies in this field of immense global importance.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - If we accept the premise that an embedded engineer is made rather than born, then how does one go about making a good one The authors ofthisbookExploring C for Microcontrollers: A Hands-on Approach are certainly 'good ones'. Not only do they explore some of the in uences thatshapedthemselvesbuttheyalsotrytoshape'would-be'embedded engineers. Research and developmental activities in embedded systems has grown in a signi cant proportion in the recent past. Embedded so- ware design is not new to the world, but with the changing time, it has gained considerable momentum in the recent past, and many young engineers are strongly inclined to pursue their future in this eld. The book is mainly targeted to these engineers who would like to understand in great depth the synergetic combination of hardware and software. The book is divided into eight chapters. Chapter 1 introduces a brief background about micro-controllers and explains how they are emb- dedintoproductscommerciallyavailableinthemarkettoemphasizethe importance of these in the daily life of mankind. It also gives an insight into the architectural details and embedded system concepts for s- dents' projects to motivate them into this exciting eld. The rest of the bookconcentratesonsoftwaredevelopment. Theintegrateddevelopment environment (IDE) is introduced in Chapter 2. Again the screen shots and step-by-step procedure will certainly make the students and en- neers fully understand the development process. Chapter 3 di eren- ates the embedded C paradigm from the conventional ANSI C. Again the authors explain how to successfully overcome the memory and time constraints while developing an embedded C program.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Second in the series, Practical Aspects of Embedded System Design using Microcontrollers emphasizes the same philosophy of 'Learning by Doing' and 'Hands on Approach' with the application oriented case studies developed around the PIC16F877 and AT 89S52, today's most popular microcontrollers. Readers with an academic and theoretical understanding of embedded microcontroller systems are introduced to the practical and industry oriented Embedded System design. When kick starting a project in the laboratory a reader will be able to benefit experimenting with the ready made designs and 'C' programs. One can also go about carving a big dream project by treating the designs and programs presented in this book as building blocks. Practical Aspects of Embedded System Design using Microcontrollers is yet another valuable addition and guides the developers to achieve shorter product development times with the use of microcontrollers in the days of increased software complexity. Going through the text and experimenting with the programs in a laboratory will definitely empower the potential reader, having more or less programming or electronics experience, to build embedded systems using microcontrollers around the home, office, store, etc. Practical Aspects of Embedded System Design using Microcontrollers will serve as a good reference for the academic community as well as industry professionals and overcome the fear of the newbies in this field of immense global importance.

Taschenbuch. Zustand: Neu. Hands-on Experience with Altera FPGA Development Boards | Jivan S. Parab (u. a.) | Taschenbuch | xii | Englisch | 2017 | Springer | EAN 9788132237679 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - If we accept the premise that an embedded engineer is made rather than born, then how does one go about making a good one The authors ofthisbookExploring C for Microcontrollers: A Hands-on Approach are certainly 'good ones'. Not only do they explore some of the in uences thatshapedthemselvesbuttheyalsotrytoshape'would-be'embedded engineers. Research and developmental activities in embedded systems has grown in a signi cant proportion in the recent past. Embedded so- ware design is not new to the world, but with the changing time, it has gained considerable momentum in the recent past, and many young engineers are strongly inclined to pursue their future in this eld. The book is mainly targeted to these engineers who would like to understand in great depth the synergetic combination of hardware and software. The book is divided into eight chapters. Chapter 1 introduces a brief background about micro-controllers and explains how they are emb- dedintoproductscommerciallyavailableinthemarkettoemphasizethe importance of these in the daily life of mankind. It also gives an insight into the architectural details and embedded system concepts for s- dents' projects to motivate them into this exciting eld. The rest of the bookconcentratesonsoftwaredevelopment. Theintegrateddevelopment environment (IDE) is introduced in Chapter 2. Again the screen shots and step-by-step procedure will certainly make the students and en- neers fully understand the development process. Chapter 3 di eren- ates the embedded C paradigm from the conventional ANSI C. Again the authors explain how to successfully overcome the memory and time constraints while developing an embedded C program.

Taschenbuch. Zustand: Neu. Neuware -This book is built around the use of readymade soft processor cores for FPGA design. In particular, the book focuses on Altera FPGA boards. The book explores many different embedded systems needs and prepares its readers for hands-on design and development of such systems. Many worked-out examples and case studies have been included to enable a clear understanding of design concepts. Primarily designed as a textbook for core or lab courses on FPGA based embedded systems, this book will appeal to students and instructors alike. The book takes an autodidactic approach, which also makes it suitable for hobbyists and practitioners looking to acquaint themselves with Altera FPGA boards.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 164 pp. Englisch.

Buch. Zustand: Neu. Neuware - Learning by Doing with National Instruments Development Boards starts with a brief introduction to LabVIEW programming, which is required to explore the National Instrument platform, an introduction that includes detailed installation and licensing setup. Further, it gives the features and configuration setup of NI SPEEDY-33, NI ELVIS and myRIO boards. The focus of the book is on worked-out case studies for students working in different areas of electronics such as basic digital design, biomedical instrumentation, sensors and measurement. Data acquisition using SPEEDY-33, NI -ELVIS and myRIO kits is also odiscussed. The book also examines the myRIO platform.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book is built around the use of readymade soft processor cores for FPGA design. In particular, the book focuses on Altera FPGA boards. The book explores many different embedded systems needs and prepares its readers for hands-on design and development of such systems. Many worked-out examples and case studies have been included to enable a clear understanding of design concepts. Primarily designed as a textbook for core or lab courses on FPGA based embedded systems, this book will appeal to students and instructors alike. The book takes an autodidactic approach, which also makes it suitable for hobbyists and practitioners looking to acquaint themselves with Altera FPGA boards.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | If we accept the premise that an embedded engineer is made rather than born, then how does one go about making a good one? The authors ofthisbookExploring C for Microcontrollers: A Hands-on Approach are certainly ¿good ones¿. Not only do they explore some of the in?uences thatshapedthemselvesbuttheyalsotrytoshape¿would-be¿embedded engineers. Research and developmental activities in embedded systems has grown in a signi?cant proportion in the recent past. Embedded so- ware design is not new to the world, but with the changing time, it has gained considerable momentum in the recent past, and many young engineers are strongly inclined to pursue their future in this ?eld. The book is mainly targeted to these engineers who would like to understand in great depth the synergetic combination of hardware and software. The book is divided into eight chapters. Chapter 1 introduces a brief background about micro-controllers and explains how they are emb- dedintoproductscommerciallyavailableinthemarkettoemphasizethe importance of these in the daily life of mankind. It also gives an insight into the architectural details and embedded system concepts for s- dents¿ projects to motivate them into this exciting ?eld. The rest of the bookconcentratesonsoftwaredevelopment. Theintegrateddevelopment environment (IDE) is introduced in Chapter 2. Again the screen shots and step-by-step procedure will certainly make the students and en- neers fully understand the development process. Chapter 3 di?eren- ates the embedded C paradigm from the conventional ANSI C. Again the authors explain how to successfully overcome the memory and time constraints while developing an embedded C program.

Zustand: Gut. Zustand: Gut | Sprache: Englisch | Produktart: Bücher | If we accept the premise that an embedded engineer is made rather than born, then how does one go about making a good one? The authors ofthisbookExploring C for Microcontrollers: A Hands-on Approach are certainly ¿good ones¿. Not only do they explore some of the in?uences thatshapedthemselvesbuttheyalsotrytoshape¿would-be¿embedded engineers. Research and developmental activities in embedded systems has grown in a signi?cant proportion in the recent past. Embedded so- ware design is not new to the world, but with the changing time, it has gained considerable momentum in the recent past, and many young engineers are strongly inclined to pursue their future in this ?eld. The book is mainly targeted to these engineers who would like to understand in great depth the synergetic combination of hardware and software. The book is divided into eight chapters. Chapter 1 introduces a brief background about micro-controllers and explains how they are emb- dedintoproductscommerciallyavailableinthemarkettoemphasizethe importance of these in the daily life of mankind. It also gives an insight into the architectural details and embedded system concepts for s- dents¿ projects to motivate them into this exciting ?eld. The rest of the bookconcentratesonsoftwaredevelopment. Theintegrateddevelopment environment (IDE) is introduced in Chapter 2. Again the screen shots and step-by-step procedure will certainly make the students and en- neers fully understand the development process. Chapter 3 di?eren- ates the embedded C paradigm from the conventional ANSI C. Again the authors explain how to successfully overcome the memory and time constraints while developing an embedded C program.

Paperback. Zustand: Brand New. 150 pages. 9.00x6.00x0.50 inches. In Stock.

Taschenbuch. Zustand: Neu. Python Programming Recipes for IoT Applications | Jivan S. Parab (u. a.) | Taschenbuch | xiv | Englisch | 2024 | Springer | EAN 9789811994685 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Neuware -The book comprehensively covers the most important applications of the internet of things (IoT) using Python programming on Raspberry pi, Micropython Py Board, and NVIDIA Jetson Board. The authors have used an immersive ¿hands-on¿ approach to help readers gain expertise in developing working code for real-world IoT applications. The book focuses on industry-standard embedded platforms for IoT applications. It also gives a glimpse of python programming and setup configuration of these embedded platforms. The later chapter highlights basic interface applications with Raspberry Pi. Exclusive advanced IoT applications on the Micropython Pyboard are also covered. The last two chapters deal with the NVIDIA Jetson Nano board programming for machine learning applications with FoG/cloud computing.The various IoT applications with different embedded platforms in this volume are best-suited for undergraduate/postgraduate students and researchers who want to get exposed to python programming for IoT applications. This book will enable readers to design their own embedded IoT products.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 208 pp. Englisch.

Buch. Zustand: Neu. Neuware -The book comprehensively covers the most important applications of the internet of things (IoT) using Python programming on Raspberry pi, Micropython Py Board, and NVIDIA Jetson Board. The authors have used an immersive ¿hands-on¿ approach to help readers gain expertise in developing working code for real-world IoT applications. The book focuses on industry-standard embedded platforms for IoT applications. It also gives a glimpse of python programming and setup configuration of these embedded platforms. The later chapter highlights basic interface applications with Raspberry Pi. Exclusive advanced IoT applications on the Micropython Pyboard are also covered. The last two chapters deal with the NVIDIA Jetson Nano board programming for machine learning applications with FoG/cloud computing.The various IoT applications with different embedded platforms in this volume are best-suited for undergraduate/postgraduate students and researchers who want to get exposed to python programming for IoT applications. This book will enable readers to design their own embedded IoT products.Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 208 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The book comprehensively covers the most important applications of the internet of things (IoT) using Python programming on Raspberry pi, Micropython Py Board, and NVIDIA Jetson Board. The authors have used an immersive 'hands-on' approach to help readers gain expertise in developing working code for real-world IoT applications. The book focuses on industry-standard embedded platforms for IoT applications. It also gives a glimpse of python programming and setup configuration of these embedded platforms. The later chapter highlights basic interface applications with Raspberry Pi. Exclusive advanced IoT applications on the Micropython Pyboard are also covered. The last two chapters deal with the NVIDIA Jetson Nano board programming for machine learning applications with FoG/cloud computing.The various IoT applications with different embedded platforms in this volume are best-suited for undergraduate/postgraduate students and researchers who want to get exposed to python programming for IoT applications. This book will enable readers to design their own embedded IoT products.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The book comprehensively covers the most important applications of the internet of things (IoT) using Python programming on Raspberry pi, Micropython Py Board, and NVIDIA Jetson Board. The authors have used an immersive 'hands-on' approach to help readers gain expertise in developing working code for real-world IoT applications. The book focuses on industry-standard embedded platforms for IoT applications. It also gives a glimpse of python programming and setup configuration of these embedded platforms. The later chapter highlights basic interface applications with Raspberry Pi. Exclusive advanced IoT applications on the Micropython Pyboard are also covered. The last two chapters deal with the NVIDIA Jetson Nano board programming for machine learning applications with FoG/cloud computing.The various IoT applications with different embedded platforms in this volume are best-suited for undergraduate/postgraduate students and researchers who want to get exposed to python programming for IoT applications. This book will enable readers to design their own embedded IoT products.