matyjaszewski krzysztof (31 Ergebnisse)

Hardcover. 1. 163 p. Very good condition. Reading pages are very clean and without marks. Retired library exemplar, with the usual marking. Minimal signs of storage and use. Still very good copy. 9783540102090 Sprache: Englisch Gewicht in Gramm: 404.

Hardcover. Zustand: Sehr gut. XII, 191 S.; Ill. Very good. Shrink wrapped. Sprache: Englisch Gewicht in Gramm: 580.

Hardcover. 1. 335 p. Very good condition. Reading pages are very clean and without marks. Retired library exemplar, with the usual marking. Minimal signs of storage and use. Still very good copy. 9783540137818 Sprache: Englisch Gewicht in Gramm: 730.

Gebundene Ausgabe. Zustand: Wie neu. 327 Seiten; Zustand geprüft, Versand werktags innerhalb von 24 Stunden. neuwertig und ungelesen ZA 9177138 Sprache: Englisch Gewicht in Gramm: 588.

hardcover. Zustand: Very Good. Zustand des Schutzumschlags: No Dust Jacket. First Edition. Very good, crisp condition. Clean, bright and tight. Used.

Hardcover. Zustand: New. No Jacket. 3rd Edition. New copy. (see picture) Volume 3,Completely Revised and Enlarged Edition.We also have Volume 1 and 5.

Hardcover. Zustand: New. No Jacket. 2nd Edition. New copy. (see picture) 453 pages.Completely Revised and Enlarged Edition.Volume 1 We also have Volume 3 and 5.

Hardcover. Zustand: Sehr gut. XLII, 730 p. Volume 1 only. Very good. Sprache: Englisch Gewicht in Gramm: 1680.

Hardcover. Zustand: Sehr gut. XXXVIII, pp. 731 - 1385 Volume 2 only. Very good. Sprache: Englisch Gewicht in Gramm: 1520.

Paperback. Zustand: Brand New. reprint edition. 594 pages. 9.25x6.10x1.10 inches. In Stock.

Zustand: very good. Gut/Very good: Buch bzw. Schutzumschlag mit wenigen Gebrauchsspuren an Einband, Schutzumschlag oder Seiten. / Describes a book or dust jacket that does show some signs of wear on either the binding, dust jacket or pages.

Hardcover. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.

Zustand: New. pp. xiv + 369 Illus.

Zustand: New. Krzysztof MatyjaszewskiThis unified presentation of cationic polymerization discusses initiation, propagation, transfer, and termination in cationic polymerizations of alkenes and heterocycles. It also elucidates the mechanisms of the reactions involved.

Buch. Zustand: Neu. Neuware - This book is focused on recent progress in the dynamically developing field of controlled/living radical polymerization. It is a sequel to ACS Symposium Series 685, 768, 854, and 944. Volume 1023 contains 26 chapters on mechanistic, synthetic and materials aspects of ATRP. Volume 1024 contains 24 chapters on other controlled/living radical polymerization techniques.

Zustand: Very Good.

Zustand: New. Series: Advances in Polymer Science. Num Pages: 335 pages, 12 black & white illustrations, biography. BIC Classification: PNNP; TDCP; TGM. Category: (P) Professional & Vocational. Dimension: 244 x 170 x 17. Weight in Grams: 580. . 2013. Softcover reprint of the original 1st ed. 1985. Paperback. . . . . Books ship from the US and Ireland.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 360 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The design and the realisation of well defined polymer architectures has become an important goal in macromolecular science. The prerequisite for achieving this goal is the availability of controlled polymerisation reactions. Living anionic polymerisation was the first reaction fulfilling these requirements. Cationic polymerisation only came into play when it was realised that it was possible to create an equilibrium between active and dormant species with the fraction of the dormant species being far superior to that of active ones. A corresponding principle applies to controlled radical polymerisation per formed in quite a number of modes such as nitroxide mediated polymerisation (NMP), atom transfer radical polymerisation (ATRP), reversible addition frag mentation chain transfer (RAFT) or catalytic chain transfer (CCT) reactions. All of these variants of controlled radical polymerisation lead to well defined archi tectures with the particular advantage that a much larger number of monomers are suitable and the reaction conditions are much less demanding than those of living ionic polymerisation reactions. Although in controlled radical polymerisation, termination reactions cannot be excluded completely, they are limited in their extent and consequently the mol ecular weight is controlled, the polydispersity index is small and functionalities can be attached to the macromolecules. These features are indicative of the real isation of well defined polymer architectures such as block copolymers, star shaped and comb shaped copolymers.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The design and the realisation of well defined polymer architectures has become an important goal in macromolecular science. The prerequisite for achieving this goal is the availability of controlled polymerisation reactions. Living anionic polymerisation was the first reaction fulfilling these requirements. Cationic polymerisation only came into play when it was realised that it was possible to create an equilibrium between active and dormant species with the fraction of the dormant species being far superior to that of active ones. A corresponding principle applies to controlled radical polymerisation per formed in quite a number of modes such as nitroxide mediated polymerisation (NMP), atom transfer radical polymerisation (ATRP), reversible addition frag mentation chain transfer (RAFT) or catalytic chain transfer (CCT) reactions. All of these variants of controlled radical polymerisation lead to well defined archi tectures with the particular advantage that a much larger number of monomers are suitable and the reaction conditions are much less demanding than those of living ionic polymerisation reactions. Although in controlled radical polymerisation, termination reactions cannot be excluded completely, they are limited in their extent and consequently the mol ecular weight is controlled, the polydispersity index is small and functionalities can be attached to the macromolecules. These features are indicative of the real isation of well defined polymer architectures such as block copolymers, star shaped and comb shaped copolymers.

Gebunden. Zustand: New. This book is focused on recent progress in the rapidly developing field of controlled/living radical polymerization.&Uumlber den AutorrnrnKrzysztof Matyjaszewski is J.C. Warner Professor of Natural Sciences at Carnegie Mellon University in .

Paperback. Zustand: Brand New. 204 pages. 8.75x6.00x0.75 inches. In Stock.

Buch. Zustand: Neu. Neuware - This book is the first volume in a two-volume compilation on controlled/living radical polymerization. It combines all important aspects of controlled radical polymerization: from synthetic procedures, to rational selection of reaction components, to understanding of the reaction mechanisms, to materials and applications.This book is focused on recent progress in the rapidly developing field of controlled/living radical polymerization. It is a sequel to ACS Symposium Series 685, 768, 854, 944, 1023, and 1024. Volume 1100 deals with the mechanistic aspects of controlled radical polymerization and describes the recent advances in the most important techniques, whereas Volume 1101 contains chapters on new materials prepared by controlled radical polymerization as well as applications of thesematerials.

Buch. Zustand: Neu. Neuware - The progress in polymer science is revealed in the chapters of Polymer Science: A Comprehensive Reference, Ten Volume Set. In Volume 1, this is reflected in the improved understanding of the properties of polymers in solution, in bulk and in confined situations such as in thin films. Volume 2 addresses new characterization techniques, such as high resolution optical microscopy, scanning probe microscopy and other procedures for surface and interface characterization. Volume 3 presents the great progress achieved in precise synthetic polymerization techniques for vinyl monomers to control macromolecular architecture: the development of metallocene and post-metallocene catalysis for olefin polymerization, new ionic polymerization procedures, and atom transfer radical polymerization, nitroxide mediated polymerization, and reversible addition-fragmentation chain transfer systems as the most often used controlled/living radical polymerization methods. Volume 4 is devoted to kinetics, mechanisms and applications of ring opening polymerization of heterocyclic monomers and cycloolefins (ROMP), as well as to various less common polymerization techniques. Polycondensation and non-chain polymerizations, including dendrimer synthesis and various 'click' procedures, are covered in Volume 5. Volume 6 focuses on several aspects of controlled macromolecular architectures and soft nano-objects including hybrids and bioconjugates. Many of the achievements would have not been possible without new characterization techniques like AFM that allowed direct imaging of single molecules and nano-objects with a precision available only recently. An entirely new aspect in polymer science is based on the combination of bottom-up methods such as polymer synthesis and molecularly programmed self-assembly with top-down structuring such as lithography and surface templating, as presented in Volume 7. It encompasses polymer and nanoparticle assembly in bulk and under confined conditions or influenced by an external field, including thin films, inorganic-organic hybrids, or nanofibers. Volume 8 expands these concepts focusing on applications in advanced technologies, e.g. in electronic industry and centers on combination with top down approach and functional properties like conductivity. Another type of functionality that is of rapidly increasing importance in polymer science is introduced in volume 9. It deals with various aspects of polymers in biology and medicine, including the response of living cells and tissue to the contact with biofunctional particles and surfaces. The last volume is devoted to the scope and potential provided by environmentally benign and green polymers, as well as energy-related polymers. They discuss new technologies needed for a sustainable economy in our world of limited resources.

Zustand: New. Provides coverage of all aspects of polymer science from synthesis/polymerization, properties, and characterization methods and techniques to nanostructures, sustainability and energy, and biomedical uses of polymers. This title includes electronic version .

UNK. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Hardcover. Zustand: Brand New. 1st edition. 7760 pages. 12.00x9.50x17.50 inches. In Stock.

Zustand: New. Krzysztof Matyjaszewski is currently J.C. Warner University Professor of Natural Sciences at Carnegie Mellon University in Pittsburgh, USA. He is also Director of Center for Macromolecular Engineering at CMU and adjunct professor at University of Pittsburgh.

Zustand: New. pp. 7760.

Hardcover. Zustand: Good. 10 volume set. Books have minor shelf wear. Pages are clean and intact.