Gesamtpreis (1 Artikel Artikel):
Versandziel:
leondes c t (60 Ergebnisse)
Direkt zu den wichtigsten Suchergebnissen
Suchfilter
Produktart
- Alle Product Types
- Bücher (60)
- Magazine & Zeitschriften (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Comics (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Noten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Kunst, Grafik & Poster (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Fotografien (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Karten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Manuskripte & Papierantiquitäten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Zustand Mehr dazu
- Neu (21)
- Wie Neu, Sehr Gut oder Gut Bis Sehr Gut (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Gut oder Befriedigend (30)
- Ausreichend oder Schlecht (2)
- Wie beschrieben (7)
Weitere Eigenschaften
- Erstausgabe (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Signiert (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Schutzumschlag (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Angebotsfoto (3)
Sprache (2)
Gratisversand
Land des Verkäufers
Verkäuferbewertung
-
Control and Dynamic Systems. Advances in Theory and Applications. Volume 24: Decentralized/Distributed Control and Dynamic Systems, Part 3 of 3
Anbieter: Zubal-Books, Since 1961, Cleveland, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. Price has been reduced by 10% until Monday, Dec. 8 (sale item) 362 pp., hardcover, ex library, else text and binding still clean, tight and bright. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
-
Advances in Control Systems: Theory and Applications
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Control and Dynamic Systems. Advances in Theory and Applications. Volume 23: Decentralized/Distributed Control and Dynamic Systems, Part 2 of 3
Anbieter: Zubal-Books, Since 1961, Cleveland, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. Price has been reduced by 10% until Monday, Dec. 8 (sale item) 323 pp., hardcover, ex library, else text clean & binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
-
Control and Dynamic Systems. Advances in Theory and Applications. Volume 37: Advances in Industrial Systems
Anbieter: Zubal-Books, Since 1961, Cleveland, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. Price has been reduced by 10% until Monday, Dec. 8 (sale item) 425 pp., hardcover, ex library, else text and binding clean, tight, and bright. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
-
Control and Dynamic Systems. Advances in Theory and Applications. Volume 57: Multidisciplinary Engineering Systems: Design and Optimization Techniques and Their Application
Anbieter: Zubal-Books, Since 1961, Cleveland, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. Price has been reduced by 10% until Monday, Dec. 8 (sale item) 493 pp., hardcover, ex library, else text and binding still clean, tight and bright. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
-
Control and Dynamic Systems. Advances in Theory and Applications. Volume 48: Manufacturing and Automation Systems: Techniques and Technologies, Part 4 of 5
Anbieter: Zubal-Books, Since 1961, Cleveland, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. Price has been reduced by 10% until Monday, Dec. 8 (sale item) 447 pp., hardcover, minor library markings, else text clean & binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
-
Control and Dynamic Systems. Advances in Theory and Application. Volume 15
Anbieter: Zubal-Books, Since 1961, Cleveland, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. Price has been reduced by 10% until Monday, Dec. 8 (sale item) 360 pp., hardcover, ex library else text clean & binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
-
Control and Dynamic Systems: Advances in Theory and Applications (Volume 13)
Verlag: Academic Press
Anbieter: Wonder Book, Frederick, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. Very Good condition. No Dust Jacket Volume 13. (contol theory, automatic control) A copy that may have a few cosmetic defects. May also contain light spine creasing or a few markings such as an owner's name, short gifter's inscription or light stamp.
-
Control and Dynamic Systems. Advances in Theory and Applications. Volume 47: Manufacturing and Automation Systems: Techniques and Technologies, Part 3 of 5
Anbieter: Zubal-Books, Since 1961, Cleveland, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. Price has been reduced by 10% until Monday, Dec. 8 (sale item) 431 pp., hardcover, ex library, else text and binding still clean, tight and bright. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
-
Knowledge-Based System: Techniques and Applications (Volume 1)
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 23,91
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Poor. Volume 1. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In poor condition, suitable as a reading copy. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,950grams, ISBN:9780124438767.
-
Knowledge-Based System: Techniques and Applications (Volume 3)
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 25,08
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 3. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,950grams, ISBN:9780124438781.
-
Expert Systems: The Technology of Knowledge Management and Decision Making for the 21st Century (Volume 1)
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 25,09
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 1. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,850grams, ISBN:9780124438811.
-
Computer Aided and Integrated Manufacturing Systems - Volume 1: Computer Techniques (Volume 1)
Verlag: World Scientific Publishing Co Pte Ltd, 2003
ISBN 10: 9812389830 ISBN 13: 9789812389831
Sprache: Englisch
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 25,24
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 1. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,750grams, ISBN:9789812389831.
-
Knowledge-Based Systems: Techniques and Applications (Volume 2)
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 25,26
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 2. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,950grams, ISBN:9780124438774.
-
Neural Network Systems Techniques and Applications: Image Processing and Pattern Recognition (Volume 5)
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 25,41
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 5. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,800grams, ISBN:9780124438651.
-
Gordon and Breach International Series in Engineering, Technology and Applied Science: Structural Dynamic Systems, Computational Techniques and Optimization: Reliability and Damage Tolerance (Volume 10)
Verlag: Gordon & Breach Science Publishers Ltd, 1999
ISBN 10: 9056996525 ISBN 13: 9789056996529
Sprache: Englisch
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 26,52
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 10. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,700grams, ISBN:9789056996529.
-
Control and Dynamic Systems: Advances in Theory and Applications (Volume 20)
Verlag: Academic Press, 1983
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 13,59
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 20. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,600grams, ISBN:
-
Computer Aided and Integrated Manufacturing Systems: Computer Aided Design/ Computer Aided Manufacturing (CAD/CAM) (Volume 4)
Verlag: World Scientific Publishing, 2003
ISBN 10: 9812383395 ISBN 13: 9789812383396
Sprache: Englisch
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 28,67
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 4. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,900grams, ISBN:9789812383396.
-
Expert Systems: The Technology of Knowledge Management and Decision Making for the 21st Century (Volume 3)
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 28,91
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 3. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,900grams, ISBN:9780124438842.
-
Gordon and Breach International Series in Engineering, Technology and Applied Science: Structural Dynamic Systems, Computational Techniques and Optimization: Reliability and Damage Tolerance (Volume 10)
Verlag: Gordon & Breach Science Publishers Ltd, 1999
ISBN 10: 9056996525 ISBN 13: 9789056996529
Sprache: Englisch
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 29,98
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 10. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,700grams, ISBN:9789056996529.
-
Computer Aided and Integrated Manufacturing Systems: Manufacturing Processes (Volume 5)
Verlag: World Scientific Publishing, 2003
ISBN 10: 9812389792 ISBN 13: 9789812389794
Sprache: Englisch
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 30,58
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 5. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,750grams, ISBN:9789812389794.
-
Computer Aided and Integrated Manufacturing Systems: Intelligent Systems Technologies (Volume 2)
Verlag: World Scientific Publishing, 2003
ISBN 10: 9812383395 ISBN 13: 9789812383396
Sprache: Englisch
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 31,11
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 2. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,750grams, ISBN:9789812383396.
-
Computer Aided and Integrated Manufacturing Systems: Optimization Methods (Volume 3)
Verlag: World Scientific Publishing, 2003
ISBN 10: 9812383395 ISBN 13: 9789812383396
Sprache: Englisch
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 31,26
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 3. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,700grams, ISBN:9789812383396.
-
Expert Systems: The Technology of Knowledge Management and Decision Making for the 21st Century (Volume 3)
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 31,34
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 3. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,950grams, ISBN:9780124438835.
-
Gordon and Breach International Series in Engineering, Technology and Applied Science: Structural Dynamic Systems, Computational Techniques and Optimization: Computer-Aided Design and Engineering (Volume 7)
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 32,05
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 7. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,650grams, ISBN:9789056996420.
-
Expert Systems: The Technology of Knowledge Management and Decision Making for the 21st Century (Volume 2)
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 33,65
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 2. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,900grams, ISBN:9780124438828.
-
Knowledge-Based Systems: Techniques and Applications (Volumes 1, 2, 3, 4)
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 26,11
EUR 23,14 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volumes 1, 2, 3, 4. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,3600grams, ISBN:012443875X.
-
Gordon and Breadh International Series on Engineering, Technology and Applied Science: Structural Dynamic Systems Computational Techniques and Optimization: Optimization Techniques (Volume 9)
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 34,42
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Good. Volume 9. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,650grams, ISBN:9789056996444.
-
Computer Control Systems Technology (Engineering Extension Series)
Verlag: McGraw-Hill, 1961
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 26,85
EUR 15,33 shipping
Ships from Vereinigtes Königreich to USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Poor. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In poor condition, suitable as a reading copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,1150grams, ISBN:
-
DYNAMIC DECISION THEORY AND TECHNIQUES
Erscheinungsdatum: 1973
Anbieter: Xerxes Fine and Rare Books and Documents, Glen Head, NY, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: VG. NY 1973. Octavo., 66pp., removed from volume and rebound in wraps. VG.
