leech c m (20 Ergebnisse)

Zustand: Very Good. 1781424908. 6/14/2026 8:15:08 AM.

Zustand: New. pp. 360 Figure.

Hardcover. Zustand: Good. Harrow, Kenneth; H. M. Brock; Peter Fraser; Chas. Howarth; Dorothy Wheeler; Laurie Taylor; Margaret oO. McNeal; Frank Hart; Harry Rountree; Cicely M. Barker; Geo. W. Leech; B. Butler; Joan Passmore; Philip Plimlott; Diana Rourke; Dudley Tennant (illustrator). Good+ condition, quarto, quarter tan cloth, pictorial front and press comments on rear, tile in black with pictorial spine, moderate wear, faint cup stain on front, neat gift inscription on front free end paper, illustrated end papers, illustrated throughout with colour plates and tinted drawings in text, not paginated. Long and short stories and verse. A good example. [QP].

Mays (S. A. Phytochemistry Vol. 13) 1974. S. 403 - 413. m. zahlr. Tab. geklammert -2) Sonderabdruck.

Paperback. Zustand: Brand New. reprint edition. 256 pages. 9.45x6.61x0.63 inches. In Stock.

Zustand: New. During the 2008 election season, politicians from both sides of the aisle promised to rid government of lobbyists undue influence. Based on a comprehensive examination of ninety-eight issues, this title demonstrates that sixty per cent of the lobbying camp.

Zustand: New. In.

Zustand: New.

Gebunden. Zustand: New.

Hardcover. Zustand: Brand New. 2014 edition. 150 pages. 9.25x6.25x0.50 inches. In Stock.

Taschenbuch. Zustand: Neu. The Modelling and Analysis of the Mechanics of Ropes | C. M. Leech | Taschenbuch | xi | Englisch | 2016 | Springer Netherland | EAN 9789401776387 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Paperback. Zustand: Brand New. reprint edition. 136 pages. 9.25x6.10x0.32 inches. In Stock.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book considers the modelling and analysis of the many types of ropes, linear fibre assemblies. The construction of these structures is very diverse and in the work these are considered from the modelling point of view. As well as the conventional twisted structures, braid and plaited structures and parallel assemblies are modelled and analysed, first for their assembly and secondly for their mechanical behaviour. Also since the components are assemblies of components, fibres into yarns, into strands, and into ropes the hierarchical nature of the construction is considered.The focus of the modelling is essentially toward load extension behaviour but there is reference to bending of ropes, encompassed by the two extremes, no slip between the components and zero friction resistance to component slip. Friction in ropes is considered both between the rope components, sliding, sawing and scissoring, and within the components, dilation and distortion, these latter modes being used to model component set, the phenomenon instrumental in rope proofing. The exploitation of the modelling is closed by the suggested modelling and analysis of component wear and life limitation and also of rope steady state heating. These will require extensive experimentation to extract the necessary coefficients, achievable by parallel testing of prototypes and similar structures.This development is focused on the modelling and analysis of ropes and other similar structures. All the modelling is based on the Principle of Virtual Work and admissible modes of deformation. Finally this book is directed towards the various industries involved in design, manufacture and use of ropes, stays and other similar structures.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book considers the modelling and analysis of the many types of ropes, linear fibre assemblies. The construction of these structures is very diverse and in the work these are considered from the modelling point of view. As well as the conventional twisted structures, braid and plaited structures and parallel assemblies are modelled and analysed, first for their assembly and secondly for their mechanical behaviour. Also since the components are assemblies of components, fibres into yarns, into strands, and into ropes the hierarchical nature of the construction is considered.The focus of the modelling is essentially toward load extension behaviour but there is reference to bending of ropes, encompassed by the two extremes, no slip between the components and zero friction resistance to component slip. Friction in ropes is considered both between the rope components, sliding, sawing and scissoring, and within the components, dilation and distortion, these latter modes being used to model component set, the phenomenon instrumental in rope proofing. The exploitation of the modelling is closed by the suggested modelling and analysis of component wear and life limitation and also of rope steady state heating. These will require extensive experimentation to extract the necessary coefficients, achievable by parallel testing of prototypes and similar structures.This development is focused on the modelling and analysis of ropes and other similar structures. All the modelling is based on the Principle of Virtual Work and admissible modes of deformation. Finally this book is directed towards the various industries involved in design, manufacture and use of ropes, stays and other similar structures.

Zustand: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | This book considers the modelling and analysis of the many types of ropes, linear fibre assemblies. The construction of these structures is very diverse and in the work these are considered from the modelling point of view. As well as the conventional twisted structures, braid and plaited structures and parallel assemblies are modelled and analysed, first for their assembly and secondly for their mechanical behaviour. Also since the components are assemblies of components, fibres into yarns, into strands, and into ropes the hierarchical nature of the construction is considered.The focus of the modelling is essentially toward load extension behaviour but there is reference to bending of ropes, encompassed by the two extremes, no slip between the components and zero friction resistance to component slip. Friction in ropes is considered both between the rope components, sliding, sawing and scissoring, and within the components, dilation and distortion, these latter modes being used to model component set, the phenomenon instrumental in rope proofing. The exploitation of the modelling is closed by the suggested modelling and analysis of component wear and life limitation and also of rope steady state heating. These will require extensive experimentation to extract the necessary coefficients, achievable by parallel testing of prototypes and similar structures.This development is focused on the modelling and analysis of ropes and other similar structures. All the modelling is based on the Principle of Virtual Work and admissible modes of deformation. Finally this book is directed towards the various industries involved in design, manufacture and use of ropes, stays and other similar structures.

Hardcover. Zustand: gut. 2013. The Modelling and Analysis of the Mechanics of Ropes In deutscher Sprache. pages.

v+320+xvii pp. 8vo. Original gilt decorated cloth, some pale marks to cloth and light wear to extremities. Black and white frontispiece. Bookplate to front pastedown. Related ephemera adherred to ffe and preliminary blanks. Otherwise a very good copy. . First edition.

Zustand: Very Good. First edition in publisher's original card wrap covers [softback]. 8vo. 8½'' x 6''. Contains 38 printed pages of text with monochrome map and photographs. Age darkened cover and page edges, dust marking to the closed page edges, ink note to the front cover and in Very Good clean condition, no dust wrapper. SIGNED by the author to the title page 'To B. R. Stallwood. With the compliments J. H. N. Michaelis March 1958'. Member of the P.B.F.A. LIVERPOOL.

Mineola, 1973, in-8, tela editoriale.

Hand written thesis [18,500 words] on Essential Cello Technique hand bound in cream card covers. 10½'' x 8¼''. Contains 210 single-sided pages of typed text with monochrome photographs tipped-in throughout. Know Basic Anatomy, Use anatomically neutral positions, More motion can result in greater efficiency, More motion can result in greater technical accuracy, More Motion can loosen excessive tension, Do not hinder passive motions, Use fluid rather than static technique, Divide up the work, Use large muscle groups, Tension and Release, Use gravity. Many pencil annotations throughout, Hilary has noted to the introduction leaf 'Completely reorganised, plus new photographs, exercises, formal layout, etc.' We contacted the archives department at The Royal College of Music in London and asked if they could shed any light on this past pupil, regrettably they drew a blank, we also wrote to her home address to see if we could trace her or her family, again without any success. We just think that this work should be appreciated for what it is, we are no cello players, however, the extent and thoroughness that she has put into the book will hopefully be comprehended and cherished by the right person. Member of the P.B.F.A. MUSIC [Classical].