jonathan morrell (20 Ergebnisse)

Hardcover. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Paperback. Zustand: Brand New. 2nd edition. 110 pages. 9.00x6.00x0.25 inches. In Stock.

Gebunden. Zustand: New.

Zustand: New.

Buch. Zustand: Neu. Neuware -This book focuses on the state-of-the-art developments in machining with nanomaterials. Numerous in-depth case studies illustrate the practical use of nanomaterials in industry, including how thin film nanostructures can be applied to solving machining problems and how coatings can improve tool life and reduce machining costs in an environmentally acceptable way. Chapters include discussions on, among other things:Comparisons of re-coated cutting tools and re-ground drillsThe modeling and machining of medical materials, particularly implants, for optimum biocompatibility including corrosion resistance, bio adhesiveness, and elasticityRecent developments in machining difficult-to-cut materials, as well as machining brittle materials using nanostructured diamond toolsSpindle Speed Variation (SSV) for machining chatter suppressionNano grinding with abrasives to produce micro- and nano fluidic devices.The importance of proper design of cutting tools, including milling tools, single point turning tools, and micro cutting tools is reinforced throughout the book. This is an ideal book for engineers in industry, practitioners, students, teachers, and researchers.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 396 pp. Englisch.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book focuses on the state-of-the-art developments in machining with nanomaterials. Numerous in-depth case studies illustrate the practical use of nanomaterials in industry, including how thin film nanostructures can be applied to solving machining problems and how coatings can improve tool life and reduce machining costs in an environmentally acceptable way. Chapters include discussions on, among other things:Comparisons of re-coated cutting tools and re-ground drillsThe modeling and machining of medical materials, particularly implants, for optimum biocompatibility including corrosion resistance, bio adhesiveness, and elasticityRecent developments in machining difficult-to-cut materials, as well as machining brittle materials using nanostructured diamond toolsSpindle Speed Variation (SSV) for machining chatter suppressionNano grinding with abrasives to produce micro- and nano fluidic devices.The importance of proper design of cutting tools, including milling tools, single point turning tools, and micro cutting tools is reinforced throughout the book. This is an ideal book for engineers in industry, practitioners, students, teachers, and researchers.

Taschenbuch. Zustand: Neu. Machining with Nanomaterials | Jonathan S. Morrell (u. a.) | Taschenbuch | xi | Englisch | 2016 | Springer | EAN 9783319330938 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book focuses on the state-of-the-art developments in machining with nanomaterials. Numerous in-depth case studies illustrate the practical use of nanomaterials in industry, including how thin film nanostructures can be applied to solving machining problems and how coatings can improve tool life and reduce machining costs in an environmentally acceptable way. Chapters include discussions on, among other things:Comparisons of re-coated cutting tools and re-ground drillsThe modeling and machining of medical materials, particularly implants, for optimum biocompatibility including corrosion resistance, bio adhesiveness, and elasticityRecent developments in machining difficult-to-cut materials, as well as machining brittle materials using nanostructured diamond toolsSpindle Speed Variation (SSV) for machining chatter suppressionNano grinding with abrasives to produce micro- and nano fluidic devices.The importance of proper design of cutting tools, including milling tools, single point turning tools, and micro cutting tools is reinforced throughout the book. This is an ideal book for engineers in industry, practitioners, students, teachers, and researchers.

Zustand: New. pp. 324 Illus.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - 'Machining with Nanomaterials' focuses on the application of thin film nanostructures to the solution of machining problems. The solution to machining materials in an environmentally conscious manner is to use newly developed thin film superlattice layer coatings that provide a means to eliminate the use of flood cooling and the associated peripheral equipment. The practical significance of the development of these coatings is related to eliminating the need for cooling and lubrication by fluids and the need to machine at ever increasing cutting speeds. The effects of reducing tool life is a particular challenge in high speed machining, and this text explains how coatings can improve tool life, reduce machining costs, and machine in an environmentally acceptable way.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 324 | Sprache: Englisch | Produktart: Bücher | Uranium Processing and Properties describes developments in uranium science, engineering and processing and covers a broad spectrum of topics and applications in which these technologies are harnessed. This book offers the most up-to-date knowledge on emerging nuclear technologies and applications while also covering new and established practices for working with uranium supplies. The book also aims to provide insights into current research and processing technology developments in order to stimulate and motivate innovation among readers. Topics covered include casting technology, plate and sheet rolling, machining of uranium and uranium alloys, forming and fabrication techniques, corrosion kinetics, nondestructive evaluation and thermal modeling.

Paperback. Zustand: Brand New. 2nd reprint edition. 396 pages. 9.25x6.10x0.93 inches. In Stock.

Buch. Zustand: Neu. Neuware -Uranium Processing and Properties describes developments in uranium science, engineering and processing and covers a broad spectrum of topics and applications in which these technologies are harnessed. This book offers the most up-to-date knowledge on emerging nuclear technologies and applications while also covering new and established practices for working with uranium supplies. The book also aims to provide insights into current research and processing technology developments in order to stimulate and motivate innovation among readers. Topics covered include casting technology, plate and sheet rolling, machining of uranium and uranium alloys, forming and fabrication techniques, corrosion kinetics, nondestructive evaluation and thermal modeling.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 324 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Uranium Processing and Properties describes developments in uranium science, engineering and processing and covers a broad spectrum of topics and applications in which these technologies are harnessed. This book offers the most up-to-date knowledge on emerging nuclear technologies and applications while also covering new and established practices for working with uranium supplies. The book also aims to provide insights into current research and processing technology developments in order to stimulate and motivate innovation among readers. Topics covered include casting technology, plate and sheet rolling, machining of uranium and uranium alloys, forming and fabrication techniques, corrosion kinetics, nondestructive evaluation and thermal modeling.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Uranium Processing and Properties describes developments in uranium science, engineering and processing and covers a broad spectrum of topics and applications in which these technologies are harnessed. This book offers the most up-to-date knowledge on emerging nuclear technologies and applications while also covering new and established practices for working with uranium supplies. The book also aims to provide insights into current research and processing technology developments in order to stimulate and motivate innovation among readers. Topics covered include casting technology, plate and sheet rolling, machining of uranium and uranium alloys, forming and fabrication techniques, corrosion kinetics, nondestructive evaluation and thermal modeling.

Hardcover. Zustand: Brand New. 2013 edition. 324 pages. 9.25x6.25x1.00 inches. In Stock.

Hardcover. Zustand: Very good. Presumed First Edition, First printing. [2],xix, [1], 191, [1] pages. Illustrations (including vugraphs). Formulae. Footnotes. Figures. Tables. References. The workshop had several keynote speakers whose remarks have been summarized. There were working group reports in the areas of Transport, Thermodynamics and Phase Stability, Chemical Kinetics and Phase Transformation, Mechanical (Stress), Neutronics, Electronic Data Management and Retrieval, Mining, Assessment and Selected of Needed Compatibility Data, Measurement Practice for achieving High Value Data, Data Validity and Veritas, and Leadership and Management of the Industry-Wide Database. This was followed by Path Forward/Recommendations and a List of the Participants. Perhaps the most significant portion of this document is the Report of the Working Group on Leadership and Management of the Industry-Wide Database which was chaired by Robert Hanrahan of the National Nuclear Security Administration. Some of the other Working Group chairpersons were associated with the Los Alamos National Laboratory, the Idaho National Laboratory, the Y-12 National Security Complex, and the National Institute for Science and Technology. The sponsors of this workshop had a vision of a Nuclear Materials Compatibility Data Archive. High quality science and engineering is based on using and evaluating data. The recent advance of dynamic data evaluation has the potential to alter the paradigm of information usage, including the way data is gathered, verified, stored, and used. These changes will dramatically improve the quality, value, and sharing of information, reduce the amount of errors and duplication in scientific research, and will pinpoint and map out areas that need ore work. By coordinating with editors and the publishing community, the relatively high levels of erroneous data can be drastically reduced, as observed in the thermo and biological data fields. Dynamic data evaluation is like adding Google and Matlab together for a scientific field. The rapid advance of technologies has made it possible to create data systems that hold essentially all of the published data in a given field. By incorporating a strong set of rules, automated input systems, and comparisons with existing datasets, it becomes possible to rapidly analyze, verify, and share data in real-time without lengthy literature searches. The ability to use dynamic data evaluation for rapid data analysis can reduce the time required for literature surveys from months to minutes. In face, the literature search can even be tuned to for much deeper insight into the data and can even highlight area where data is sparse or plentiful. By building on the body of knowledge and experience of previous research teams, including the highly-recognized ThermoData engine system from NIST, it is possible to rapidly build a system for nuclear materials research that will have strong capabilities for safe and effective data-sharing in the global community. The goal of this firs Nuclear Materials Compatibility workshop was to coordinate the domestic nuclear laboratories and industries in planning the development of a system which can be effectively and safely used by all parties. The input of representatives from across the industry and government indicated a high level of interest and anticipation for the proposes system. This document details the workshop's discussions and interactions and highlights the path forward for development of a full-scale system.