jacek skrzypek (35 Ergebnisse)

235 mm x 155 mm. xxiii, 311 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Engineering Materials. Sprache: Englisch.

326 S. Ehem. Bibliotheksexemplar mit Signatur und Stempel. GUTER Zustand, ein paar Gebrauchsspuren. Ex-library with stamp and library-signature. GOOD condition, some traces of use. 9783540637257 Sprache: Englisch Gewicht in Gramm: 900.

Hardcover. XXIII, 238 S.; Ill. Like new. Shrink wrapped. Sprache: Englisch Gewicht in Gramm: 715.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher.

Zustand: New.

Hardcover. Zustand: Brand New. 2015 edition. 336 pages. 9.25x6.25x1.00 inches. In Stock.

Taschenbuch. Zustand: Neu. Creep and Damage in Materials and Structures | Jacek J. Skrzypek (u. a.) | Taschenbuch | x | Englisch | 1999 | Springer Vienna | EAN 9783211833216 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Buch. Zustand: Neu. Neuware -arranged. Among them the following types are met: nanotubes, nanop- ticles, nanopowders, nano bers, nanowires, nanocomposites, etc. ¿ At the microscale ¿ Microcomposites, such as metal matrix composites (MMCs), ceramic matrix composites (CMCs), alloys or superalloys, s- tered powders, ceramic materials, magnetorheological uids (MRFs), etc. ¿ At the macroscale ¿ Macrocomposites, such as functionally graded ma- rials (FGMs), thin layers or lms, thermal or oxidation or wear resistant coatings, multilayered structures, long ber composites, etc. At each level of analysis a response of the material to any physical excitation may be observed, measured and analyzed. In the sense of innovation of a material, the changes or new ideas can be introduced on the same scale of control (say, atomic or nano) in order to achieve fundamentally new behavior on the other scale of observation (say, micro or macro). For instance, by replacing some similar atoms in the metal crystal str- ture (e. g. Ti¿Ti or Al¿Al), by unlike atoms in the crystal (e. g. Ti¿Al), wi- out the lattice symmetry of the original material changing, new improved properties and characteristics may be observed in intermetallics at the - cro or macroscale (higher speci c strength, better creep resistance at elevated temperatures, better corrosion resistance, to mention only some properties observed at the macroscale). Similarly, changing material characteristics at the nanoscale, enables creation of completely new material functionality at micro or macroscales (e. g.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 304 pp. Englisch.

Buch. Zustand: Neu. Neuware -The book is focused on constitutive description of mechanical behaviour of engineering materials: both conventional (polycrystalline homogeneous isotropic or anisotropic metallic materials) and non-conventional (heterogeneous multicomponent anisotropic composite materials). Effective material properties at the macro-level depend on both the material microstructure (originally isotropic or anisotropic) as well as dissipative phenomena occurred on fabrication and consecutive loading phase (hardening) resulting in irreversible microstructure changes (acquired anisotropy). The material symmetry is a background and anisotropy is a core around which the book is formed. In this way a revision of classical rules of enhanced constitutive description of materials is required.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 336 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book provides at first ideas on the answers that neutrons and Synchrotron Radiation could give in innovative materials science and technology. In particular, non-conventional, unusual or innovative neutron and x-ray scattering experiments (from both the scientific and the instrumental point of view) will be described which either have novel applications or provide a new insight into material science and technology. Moreover, a capability of the existing and the enhanced constitutive models and numerical procedures to predict complex behaviour of the novel multifunctional materials is examined.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The book is focused on constitutive description of mechanical behaviour of engineering materials: both conventional (polycrystalline homogeneous isotropic or anisotropic metallic materials) and non-conventional (heterogeneous multicomponent anisotropic composite materials). Effective material properties at the macro-level depend on both the material microstructure (originally isotropic or anisotropic) as well as dissipative phenomena occurred on fabrication and consecutive loading phase (hardening) resulting in irreversible microstructure changes (acquired anisotropy). The material symmetry is a background and anisotropy is a core around which the book is formed. In this way a revision of classical rules of enhanced constitutive description of materials is required.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This textbook gives a concise survey of constitutive and structural modeling for high temperature creep, damage, low - cycle fatigue and other inelastic conditions. The book shows the creep and continuum damage mechanics as rapidly developing discipline which interlinks the material science foundations, the constitutive modeling and computer simulation application to analysis and design of simple engineering components. It is addressed to young researchers and scientists working in the field of mechanics of inelastic, time-dependent materials and structures, as well as to PhD students in computational mechanics, material sciences, mechanical and civil engineering.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The book is focused on constitutive description of mechanical behaviour of engineering materials: both conventional (polycrystalline homogeneous isotropic or anisotropic metallic materials) and non-conventional (heterogeneous multicomponent anisotropic composite materials). Effective material properties at the macro-level depend on both the material microstructure (originally isotropic or anisotropic) as well as dissipative phenomena occurred on fabrication and consecutive loading phase (hardening) resulting in irreversible microstructure changes (acquired anisotropy). The material symmetry is a background and anisotropy is a core around which the book is formed. In this way a revision of classical rules of enhanced constitutive description of materials is required.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book provides at first ideas on the answers that neutrons and Synchrotron Radiation could give in innovative materials science and technology. In particular, non-conventional, unusual or innovative neutron and x-ray scattering experiments (from both the scientific and the instrumental point of view) will be described which either have novel applications or provide a new insight into material science and technology. Moreover, a capability of the existing and the enhanced constitutive models and numerical procedures to predict complex behaviour of the novel multifunctional materials is examined.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher.

Zustand: New.

Zustand: New.

Paperback. Zustand: Brand New. reprint edition. 334 pages. 9.25x6.10x0.70 inches. In Stock.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher.

Taschenbuch. Zustand: Neu. Advanced Materials and Structures for Extreme Operating Conditions | Jacek J. Skrzypek (u. a.) | Taschenbuch | xxiv | Englisch | 2010 | Springer | EAN 9783642093678 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Modeling of Material Damage and Failure of Structures | Theory and Applications | Jacek J. Skrzypek (u. a.) | Taschenbuch | xi | Englisch | 2010 | Springer-Verlag GmbH | EAN 9783642083532 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Anisotropic Behaviour of Damaged Materials | Artur W. Ganczarski (u. a.) | Taschenbuch | xii | Englisch | 2013 | Springer-Verlag GmbH | EAN 9783642055874 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Buch. Zustand: Neu. Neuware -In the pages of this present monograph readers will find virtually everything they need to know about the latest advanced materials. The authors have covered almost every angle, including composites, functionally graded materials, and materials for high temperature service. They also examine advanced approaches to local and non-local analysis of localized damage, and provide a new description of crack deactivation. This highly informative volume also tackles the material properties for high temperature applications.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 264 pp. Englisch.

Buch. Zustand: Neu. Neuware -The area of material damage models has undergone a rapid development in the past few years. This is an extensive and comprehensive survey of one- and three-dimensional damage models for elastic and inelastic solids. The state-of-the-art is reported by about 200 references. The book not only provides a rich current source of knowledge, but also describes examples of practical applications, numerical procedures, and computer codes. The style of presentation is systematic, clear, and concise and is supported by illustrative diagrams. 344 pp. Englisch.

Buch. Zustand: Neu. Neuware -The scope of this book is based on the keynote lectures delivered during the Inter national Symposium on Anisotropic Behaviour of Damaged Materials ABDM, held in Krakow-Przegorzaiy, Poland, September 9-11, 2002. The Symposium was organized by the Solid Mechanics Division of the Institute of Mechanics and Machine Design - Cracow University of Technology, under aus pices of the Dean of the Faculty of Mechanical Engineering, Cracow University of Technology, Prof. S. Michalowski. The Co-organizers of the ABDM Symposium were: ¿ Martin-Luther-Universitat Halle-Wittenberg, ¿ Centre of Excellence for Advanced Materials and Structures AMAS at the In stitute of Fundamental Technological Research of the Polish Academy of Sci ences, Warsaw, ¿ Committee of Mechanics of the Polish Academy of Sciences, Warsaw. Ten chapters of this book in their present form essentially exceed lectures de livered at the Symposium. They should rather be read as not only author's recent achievements in the field, but also the state of art and synthesis done by the lead ers in the mechanics community. The mixed formula of the Symposium, namely: the invited lectures and presentations of the original papers by the participants was used. 23 original papers, published in the Symposium Proceedings on CD, exhaust the full scope of the ABDM Symposium. The present book provides a survey of various damage models focusing on the damage response in anisotropic materials as well as damage-induced anisotropy.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 384 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The present monograph deals with new advanced materials, including composites, functionally graded materials, materials for high temperature service, advanced approaches to local and non-local analysis of localized damage, new description of crack deactivation, and many more.It contains the following subjects:Survey of material properties for high temperature and other extreme conditions Thermodynamics of constitutive modelling of advanced materials Developing and implementing selected constitutive models for thermo-elasto-plastic-damage materials Developing and implementing constitutive models for the specific functionally graded materials, with special attention paid to thermal barrier coatings Methodology of experimental microstructure analysis and residual stress determination with application to several materials and components includig functionally graded materials.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The area of material damage models has undergone a rapid development in the past few years. This is an extensive and comprehensive survey of one- and three-dimensional damage models for elastic and inelastic solids. The state-of-the-art is reported by about 200 references. The book not only provides a rich current source of knowledge, but also describes examples of practical applications, numerical procedures, and computer codes. The style of presentation is systematic, clear, and concise and is supported by illustrative diagrams.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - In the pages of this present monograph readers will find virtually everything they need to know about the latest advanced materials. The authors have covered almost every angle, including composites, functionally graded materials, and materials for high temperature service. They also examine advanced approaches to local and non-local analysis of localized damage, and provide a new description of crack deactivation. This highly informative volume also tackles the material properties for high temperature applications.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The scope of this book is based on the keynote lectures delivered during the Inter national Symposium on Anisotropic Behaviour of Damaged Materials ABDM, held in Krakow-Przegorzaiy, Poland, September 9-11, 2002. The Symposium was organized by the Solid Mechanics Division of the Institute of Mechanics and Machine Design - Cracow University of Technology, under aus pices of the Dean of the Faculty of Mechanical Engineering, Cracow University of Technology, Prof. S. Michalowski. The Co-organizers of the ABDM Symposium were: - Martin-Luther-Universitat Halle-Wittenberg, - Centre of Excellence for Advanced Materials and Structures AMAS at the In stitute of Fundamental Technological Research of the Polish Academy of Sci ences, Warsaw, - Committee of Mechanics of the Polish Academy of Sciences, Warsaw. Ten chapters of this book in their present form essentially exceed lectures de livered at the Symposium. They should rather be read as not only author's recent achievements in the field, but also the state of art and synthesis done by the lead ers in the mechanics community. The mixed formula of the Symposium, namely: the invited lectures and presentations of the original papers by the participants was used. 23 original papers, published in the Symposium Proceedings on CD, exhaust the full scope of the ABDM Symposium. The present book provides a survey of various damage models focusing on the damage response in anisotropic materials as well as damage-induced anisotropy.