huafeng (33 Ergebnisse)

xiv, 159 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

25 cm. XIII, 204 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Unmanned System Technologies. Sprache: Englisch.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | This book covers the start-of-the-art research and development for the emerging area of autonomous and intelligent systems. In particular, the authors emphasize design and validation methodologies to address the grand challenges related to safety. This book offers a holistic view of a broad range of technical aspects (including perception, localization and navigation, motion control, etc.) and application domains (including automobile, aerospace, etc.), presents major challenges and discusses possible solutions.

Hardcover. Zustand: Brand New. 159 pages. 9.50x6.25x0.75 inches. In Stock.

Taschenbuch. Zustand: Neu. Neuware -Providing a wide variety of technologies for ensuring the safety and dependability of cyber-physical systems (CPS), this book offers a comprehensive introduction to the architecture-centric modeling, analysis, and verification of CPS. In particular, it focuses on model driven engineering methods including architecture description languages, virtual prototyping, and formal analysis methods.CPS are based on a new design paradigm intended to enable emerging software-intensive systems. Embedded computers and networks monitor and control the physical processes, usually with the help of feedback loops where physical processes affect computations and vice versa. The principal challenges in system design lie in this constant interaction of software, hardware and physics. Developing reliable CPS has become a critical issue for the industry and society, because many applications such as transportation, power distribution, medical equipment and tele-medicine are dependent on CPS. Safety and security requirements must be ensured by means of powerful validation tools. Satisfying such requirements, including quality of service, implies having formally proven the required properties of the system before it is deployed.The book is concerned with internationally standardized modeling languages such as AADL, SysML, and MARTE. As the effectiveness of the technologies is demonstrated with industrial sample cases from the automotive and aerospace sectors, links between the methods presented and industrial problems are clearly understandable. Each chapter is self-contained, addressing specific scientific or engineering problems, and identifying further issues. In closing, it includes perspectives on future directions in CPS design from an architecture analysis viewpoint.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 176 pp. Englisch.

Buch. Zustand: Neu. Neuware -Providing a wide variety of technologies for ensuring the safety and dependability of cyber-physical systems (CPS), this book offers a comprehensive introduction to the architecture-centric modeling, analysis, and verification of CPS. In particular, it focuses on model driven engineering methods including architecture description languages, virtual prototyping, and formal analysis methods.CPS are based on a new design paradigm intended to enable emerging software-intensive systems. Embedded computers and networks monitor and control the physical processes, usually with the help of feedback loops where physical processes affect computations and vice versa. The principal challenges in system design lie in this constant interaction of software, hardware and physics. Developing reliable CPS has become a critical issue for the industry and society, because many applications such as transportation, power distribution, medical equipment and tele-medicine are dependent on CPS. Safety and security requirements must be ensured by means of powerful validation tools. Satisfying such requirements, including quality of service, implies having formally proven the required properties of the system before it is deployed.The book is concerned with internationally standardized modeling languages such as AADL, SysML, and MARTE. As the effectiveness of the technologies is demonstrated with industrial sample cases from the automotive and aerospace sectors, links between the methods presented and industrial problems are clearly understandable. Each chapter is self-contained, addressing specific scientific or engineering problems, and identifying further issues. In closing, it includes perspectives on future directions in CPS design from an architecture analysis viewpoint.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 176 pp. Englisch.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Providing a wide variety of technologies for ensuring the safety and dependability of cyber-physical systems (CPS), this book offers a comprehensive introduction to the architecture-centric modeling, analysis, and verification of CPS. In particular, it focuses on model driven engineering methods including architecture description languages, virtual prototyping, and formal analysis methods. CPS are based on a new design paradigm intended to enable emerging software-intensive systems. Embedded computers and networks monitor and control the physical processes, usually with the help of feedback loops where physical processes affect computations and vice versa. The principal challenges in system design lie in this constant interaction of software, hardware and physics. Developing reliable CPS has become a critical issue for the industry and society, because many applications such as transportation, power distribution, medical equipment and tele-medicine are dependent on CPS. Safety and security requirements must be ensured by means of powerful validation tools. Satisfying such requirements, including quality of service, implies having formally proven the required properties of the system before it is deployed.The book is concerned with internationally standardized modeling languages such as AADL, SysML, and MARTE. As the effectiveness of the technologies is demonstrated with industrial sample cases from the automotive and aerospace sectors, links between the methods presented and industrial problems are clearly understandable. Each chapter is self-contained, addressing specific scientific or engineering problems, and identifying further issues. In closing, it includes perspectives on future directions in CPS design from an architecture analysis viewpoint.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Providing a wide variety of technologies for ensuring the safety and dependability of cyber-physical systems (CPS), this book offers a comprehensive introduction to the architecture-centric modeling, analysis, and verification of CPS. In particular, it focuses on model driven engineering methods including architecture description languages, virtual prototyping, and formal analysis methods. CPS are based on a new design paradigm intended to enable emerging software-intensive systems. Embedded computers and networks monitor and control the physical processes, usually with the help of feedback loops where physical processes affect computations and vice versa. The principal challenges in system design lie in this constant interaction of software, hardware and physics. Developing reliable CPS has become a critical issue for the industry and society, because many applications such as transportation, power distribution, medical equipment and tele-medicine are dependent on CPS. Safety and security requirements must be ensured by means of powerful validation tools. Satisfying such requirements, including quality of service, implies having formally proven the required properties of the system before it is deployed.The book is concerned with internationally standardized modeling languages such as AADL, SysML, and MARTE. As the effectiveness of the technologies is demonstrated with industrial sample cases from the automotive and aerospace sectors, links between the methods presented and industrial problems are clearly understandable. Each chapter is self-contained, addressing specific scientific or engineering problems, and identifying further issues. In closing, it includes perspectives on future directions in CPS design from an architecture analysis viewpoint.

Hardcover. Zustand: Brand New. 204 pages. 9.25x6.25x0.75 inches. In Stock.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book covers the start-of-the-art research and development for the emerging area of autonomous and intelligent systems. In particular, the authors emphasize design and validation methodologies to address the grand challenges related to safety. This book offers a holistic view of a broad range of technical aspects (including perception, localization and navigation, motion control, etc.) and application domains (including automobile, aerospace, etc.), presents major challenges and discusses possible solutions.

Zustand: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | This book is essential and valuable reference for graduate students and academics majored in power electronics, engineers engaged in developing distributed grid-connected inverters, and senior undergraduate students majored in electrical engineering and automation engineering. Soft-switching (SS) technique is an important way to achieve high conversion efficiency and high switching frequency for power converters, which is beneficial to improve power density and reduce volume and cost of power electronics equipment. This book mainly discusses SS technique for transformerless grid-connected inverters (TLIs), and a SS configuration named as ¿Freewheeling-Resonance-Tank Inverters¿ is proposed for TLIs fulfilling requirements of switching loss-free, full power factor range, and constant common-mode voltage performance. The detailed theoretical analysis and experimental validations are presented from ZCT and ZVT type topologies, respectively.

Zustand: New.

Taschenbuch. Zustand: Neu. High-Frequency Soft-Switching Transformerless Grid-Connected Inverters | Huafeng Xiao (u. a.) | Taschenbuch | vii | Englisch | 2023 | Springer | EAN 9789811930409 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Buch. Zustand: Neu. Neuware -This book is essential and valuable reference for graduate students and academics majored in power electronics, engineers engaged in developing distributed grid-connected inverters, and senior undergraduate students majored in electrical engineering and automation engineering. Soft-switching (SS) technique is an important way to achieve high conversion efficiency and high switching frequency for power converters, which is beneficial to improve power density and reduce volume and cost of power electronics equipment. This book mainly discusses SS technique for transformerless grid-connected inverters (TLIs), and a SS configuration named as ¿Freewheeling-Resonance-Tank Inverters¿ is proposed for TLIs fulfilling requirements of switching loss-free, full power factor range, and constant common-mode voltage performance. The detailed theoretical analysis and experimental validations are presented from ZCT and ZVT type topologies, respectively.Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 172 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book is essential and valuable reference for graduate students and academics majored in power electronics, engineers engaged in developing distributed grid-connected inverters, and senior undergraduate students majored in electrical engineering and automation engineering. Soft-switching (SS) technique is an important way to achieve high conversion efficiency and high switching frequency for power converters, which is beneficial to improve power density and reduce volume and cost of power electronics equipment. This book mainly discusses SS technique for transformerless grid-connected inverters (TLIs), and a SS configuration named as 'Freewheeling-Resonance-Tank Inverters' is proposed for TLIs fulfilling requirements of switching loss-free, full power factor range, and constant common-mode voltage performance. The detailed theoretical analysis and experimental validations are presented from ZCT and ZVT type topologies, respectively.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book is essential and valuable reference for graduate students and academics majored in power electronics, engineers engaged in developing distributed grid-connected inverters, and senior undergraduate students majored in electrical engineering and automation engineering. Soft-switching (SS) technique is an important way to achieve high conversion efficiency and high switching frequency for power converters, which is beneficial to improve power density and reduce volume and cost of power electronics equipment. This book mainly discusses SS technique for transformerless grid-connected inverters (TLIs), and a SS configuration named as 'Freewheeling-Resonance-Tank Inverters' is proposed for TLIs fulfilling requirements of switching loss-free, full power factor range, and constant common-mode voltage performance. The detailed theoretical analysis and experimental validations are presented from ZCT and ZVT type topologies, respectively.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book introduces planning method of power control configuration and structuring method of signal process link for grid-connected power conversion. These methods can be used for readers in research and engineering fields of renewable energy system. In this way, readers wishing to learn these control methods can gain insight on how to design and practice each control method easily.Readership: Graduate students and academics majored in power electronics, and engineers engaged in developing grid-connected inverters for renewable energy system; senior undergraduate students majored in electrical engineering and automation engineering.

Zustand: New.

Gebunden. Zustand: New.

Buch. Zustand: Neu. Neuware -This book provides a comprehensive overview of the current research status and open problems in the field of structural synthesis, based on which a systematic methodology for the structural analysis of planar kinematic chains, structural synthesis of planar kinematic chains, and creative design of mechanisms is presented.The method presented in this book not only promotes the development of theoretical research in the field of mechanical science, and the development of industrial software for the creative design of mechanisms, but also generates novel high-performance mechanisms suitable for industrial application, which can improve the work efficiency and economic benefits.This book offers theoretical guidance for students and researchers engaged in the field of mechanical engineering, especially the creative design of mechanism.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 312 pp. Englisch.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book provides a comprehensive overview of the current research status and open problems in the field of structural synthesis, based on which a systematic methodology for the structural analysis of planar kinematic chains, structural synthesis of planar kinematic chains, and creative design of mechanisms is presented.The method presented in this book not only promotes the development of theoretical research in the field of mechanical science, and the development of industrial software for the creative design of mechanisms, but also generates novel high-performance mechanisms suitable for industrial application, which can improve the work efficiency and economic benefits. This book offers theoretical guidance for students and researchers engaged in the field of mechanical engineering, especially the creative design of mechanism.

Hardcover. Zustand: Brand New. 169 pages. 9.25x6.10x0.59 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book provides a comprehensive overview of the current research status and open problems in the field of structural synthesis, based on which a systematic methodology for the structural analysis of planar kinematic chains, structural synthesis of planar kinematic chains, and creative design of mechanisms is presented.The method presented in this book not only promotes the development of theoretical research in the field of mechanical science, and the development of industrial software for the creative design of mechanisms, but also generates novel high-performance mechanisms suitable for industrial application, which can improve the work efficiency and economic benefits. This book offers theoretical guidance for students and researchers engaged in the field of mechanical engineering, especially the creative design of mechanism.

Hardcover. Zustand: Brand New. 256 pages. 9.25x6.10x0.75 inches. In Stock.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 436 | Sprache: Englisch | Produktart: Bücher | This book contains mechanism analysis and synthesis. In mechanism analysis, a mobility methodology is first systematically presented. This methodology, based on the author's screw theory, proposed in 1997, of which the generality and validity was only proved recently,  is a very complex issue, researched by various scientists over the last 150 years. The principle of kinematic influence coefficient and its latest developments are described. This principle is suitable for kinematic analysis of various 6-DOF and lower-mobility parallel manipulators. The singularities are classified by a new point of view, and progress in position-singularity and orientation-singularity is stated. In addition, the concept of over-determinate input is proposed and a new method of force analysis based on screw theory is presented. In mechanism synthesis, the synthesis for spatial parallel mechanisms is discussed, and the synthesis method of difficult 4-DOF and 5-DOF symmetric mechanisms, which was first put forward by the author in 2002, is introduced in detail. Besides, the three-order screw system and its space distribution of the kinematic screws for infinite possible motions of lower mobility mechanisms are both analyzed.

Paperback. Zustand: Brand New. 310 pages. 9.25x6.10x0.65 inches. In Stock.

Zustand: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | This book collects chapters on Aerospace Mechatronics and Control Technology as selected contributions from the 7th Asia Conference on Mechanical Engineering and Aerospace Engineering (MEAE) in 2021. The book focuses on novel techniques for aviation infrastructure in aerospace mechatronics and avionics systems, mechanical engineering in aerospace, and mechanical design and control system domains. The contents make valuable contributions to academic researchers and engineers in the industry.The MEAE 2021 provides a forum to discuss the latest trends and advances in mechanical engineering and aerospace engineering and related fields, and foster the exchange of ideas and international collaboration in the field.

Buch. Zustand: Neu. Neuware -This book collects chapters on Aerospace Mechatronics and Control Technology as selected contributions from the 7th Asia Conference on Mechanical Engineering and Aerospace Engineering (MEAE) in 2021. The book focuses on novel techniques for aviation infrastructure in aerospace mechatronics and avionics systems, mechanical engineering in aerospace, and mechanical design and control system domains. The contents make valuable contributions to academic researchers and engineers in the industry.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 192 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book collects chapters on Aerospace Mechatronics and Control Technology as selected contributions from the 7th Asia Conference on Mechanical Engineering and Aerospace Engineering (MEAE) in 2021. The book focuses on novel techniques for aviation infrastructure in aerospace mechatronics and avionics systems, mechanical engineering in aerospace, and mechanical design and control system domains. The contents make valuable contributions to academic researchers and engineers in the industry.The MEAE 2021 provides a forum to discuss the latest trends and advances in mechanical engineering and aerospace engineering and related fields, and foster the exchange of ideas and international collaboration in the field.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book collects chapters on Aerospace Mechatronics and Control Technology as selected contributions from the 7th Asia Conference on Mechanical Engineering and Aerospace Engineering (MEAE) in 2021. The book focuses on novel techniques for aviation infrastructure in aerospace mechatronics and avionics systems, mechanical engineering in aerospace, and mechanical design and control system domains. The contents make valuable contributions to academic researchers and engineers in the industry.The MEAE 2021 provides a forum to discuss the latest trends and advances in mechanical engineering and aerospace engineering and related fields, and foster the exchange of ideas and international collaboration in the field.