frame n d (12 Ergebnisse)

Zustand: New. Brand New. Soft Cover International Edition. Different ISBN and Cover Image. Priced lower than the standard editions which is usually intended to make them more affordable for students abroad. The core content of the book is generally the same as the standard edition. The country selling restrictions may be printed on the book but is no problem for the self-use. This Item maybe shipped from US or any other country as we have multiple locations worldwide.

Paperback. Zustand: Brand New. 398 pages. 8.00x4.75x0.75 inches. In Stock.

Single Sheet Engraving. Zustand: Very Good. No Jacket. First Edition. THEATRE PORTRAITS. MR PHELPS AS JOB THORNBURY, CHARLES MATHEWS AS THE HON. TOM SHEFFLETON AND MR TOOLE AS DENNIS BRULGRUDDERY, A COMPOSITE ENGRAVING PRINTED IN 1874. SPLENDID CONDITION, MOUNTED AND READY TO FRAME.

Buch. Zustand: Neu. Neuware -InhaltsangabeOperational Characteristics Of Twin-Screw Extrusion. Ingredient Composition. Breakfast Cereal Technology. Snack Products. Petfood and Fishfood. Confectionery Product Applications. Brewing Applications. References. IndexSpringer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 268 pp. Englisch.

Zustand: Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library, so some stamps and wear, but in good overall condition. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.

Taschenbuch. Zustand: Neu. Neuware -Extrusion cooking is a specialist area of food technology because of the complexity of the interactive effects which are inherent in the system. General predictive modelling is very difficult because ingredients are diverse and can vary considerably. Modelling tends to be product specifi- new product development tends to be by experimental designs and good fortune. The emphasis of this book is on the latest and potential applications of twin screw extrusion in food production, specifically co-rotating inter meshing screw extruders. Of course, in order to develop products and maximise the extruder potential in terms of energy, product quality and output, an overall understanding of the material flow mechanism, barrel fill length and rheology is essential. The book aims to give explanations and general guidance with examples of screw design, configuration and operat ing parameters for a variety of product categories. It is also intended to help production operators diagnose the symptoms of particular problems such as temperature control, quality variation, raw material inconsistency, etc. For the product development technologist there is more than one way to make a similar product. For example, equipment manufacturers recom mend difficult methods for producing flaked corn. In addition, their machines may differ from each other in terms of screw design, power/ volume ratio, screw tip/barrel clearance, etc. , making scale-up more prob lematic.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 268 pp. Englisch.

Taschenbuch. Zustand: Neu. The Technology of Extrusion Cooking | N. D. Frame | Taschenbuch | xi | Englisch | 2012 | Springer US | EAN 9781461358916 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Extrusion cooking is a specialist area of food technology because of the complexity of the interactive effects which are inherent in the system. General predictive modelling is very difficult because ingredients are diverse and can vary considerably. Modelling tends to be product specifi- new product development tends to be by experimental designs and good fortune. The emphasis of this book is on the latest and potential applications of twin screw extrusion in food production, specifically co-rotating inter meshing screw extruders. Of course, in order to develop products and maximise the extruder potential in terms of energy, product quality and output, an overall understanding of the material flow mechanism, barrel fill length and rheology is essential. The book aims to give explanations and general guidance with examples of screw design, configuration and operat ing parameters for a variety of product categories. It is also intended to help production operators diagnose the symptoms of particular problems such as temperature control, quality variation, raw material inconsistency, etc. For the product development technologist there is more than one way to make a similar product. For example, equipment manufacturers recom mend difficult methods for producing flaked corn. In addition, their machines may differ from each other in terms of screw design, power/ volume ratio, screw tip/barrel clearance, etc. , making scale-up more prob lematic.

Gebunden. Zustand: New.

Buch. Zustand: Neu. Neuware - 1 Operational characteristics of the co-rotating twin-screw extruder.- 1.1 Types of extruders.- 1.1.1 Single screw.- 1.1.2 Co-kneaders.- 1.1.3 Counter rotating.- 1.1.4 Co-rotating.- 1.2 Process characteristics of the t.s.e.- 1.2.1 Feeding.- 1.2.2 Screw design.- 1.2.3 Screw speed.- 1.2.4 Screw configurations.- 1.2.5 Die design.- 1.2.6 Barrel temperature and heat transfer.- 1.2.7 Scale-up.- 1.2.8 Process flow charts.- 1.3 Ancillary processes.- 1.3.1 Preconditioning.- 1.3.2 Devolatilisation.- 1.4 Raw materials.- 1.5 Practical operation of the t.s.e.-start up, shut down and control.- 1.6 Glossary.- References.- 2 Raw materials for extrusion cooking processes.- 2.1 Introduction.- 2.2 Structure-forming raw materials.- 2.2.1 Structure-forming raw materials based on starch.- 2.2.2 Protein-rich raw materials.- 2.3 Raw materials acting as fillers in the extrudates.- 2.3.1 Proteins.- 2.3.2 Starches.- 2.3.3 Fibrous materials.- 2.4 Raw materials as plasticisers and lubricants.- 2.4.1 Water.- 2.4.2 Oils and fats.- 2.4.3 Emulsifiers.- 2.5 Raw materials acting as nucleants for gas bubble formation.- 2.6 Raw materials acting as flavours.- 2.6.1 Salt.- 2.6.2 Sugar.- References.- 3 Breakfast and cereal extrusion technology.- 3.1 Introduction.- 3.2 What is a breakfast cereal .- 3.3 A closer look at the products.- 3.4 Breakfast cereal processes.- 3.5 Principles of cooking.- 3.6 Overview of cooking processes.- 3.6.1 Boiling water cookers.- 3.6.2 Steam cookers.- 3.6.3 Adiabatic extrusion.- 3.6.4 High shear cooking extrusion.- 3.6.5 Low shear, high pressure cookers.- 3.6.6 Low shear, low pressure cookers.- 3.6.7 Continuous steam pre-cooking.- 3.7 Breakfast cereal processes: traditional and extrusion methods.- 3.7.1 Flaked cereals.- 3.7.2 Extrusion puffed breakfast cereals.- 3.7.3 Oven puffed cereals.- 3.7.4 Gun puffed cereals.- 3.7.5 Shredded products.- 3.7.6 Pre-cooked hot cereals.- 3.8 Conclusion.- References.- 4 Snack food extrusion.- 4.1 Introduction.- 4.2 Ingredients.- 4.2.1 Cereals.- 4.2.2 Root crops.- 4.2.3 Process aids.- 4.3 Equipment review.- 4.3.1 Mixing equipment.- 4.3.2 Feeders.- 4.3.3 Conditioning cylinders.- 4.3.4 Extruders.- 4.3.5 Dryers.- 4.3.6 Fryers.- 4.3.7 Coaters.- 4.4 Direct expanded products.- 4.4.1 Process description.- 4.4.2 Fried collets.- 4.4.3 Baked collets.- 4.5 Co-extruded snacks.- 4.5.1 Process description.- 4.5.2 Formulation.- 4.5.3 Miscellaneous.- 4.6 Indirect expanded products.- 4.6.1 Pellets.- 4.6.2 Fabricated chips.- 4.7 Die and cutter design.- 4.7.1 Die plates.- 4.7.2 Die holes.- 4.7.3 Effect of expansion forces.- 4.7.4 Effect of viscoelastic forces.- References.- 5 Petfood and fishfood extrusion.- 5.1 Introduction.- 5.2 Raw material characteristics and selection.- 5.2.1 Protein sources.- 5.2.2 Starch sources.- 5.2.3 Fat, fibre and ash consideration.- 5.2.4 Minor ingredients.- 5.2.5 Typical formulations.- 5.2.6 Raw material preparation.- 5.3 Selection of hardware.- 5.3.1 Feeding devices.- 5.3.2 Preconditioning considerations.- 5.3.3 Extruder barrel selection.- 5.3.4 Die/knife design.- 5.3.5 Ancillary process equipment.- 5.4 Processing variables.- 5.4.1 Preconditioning.- 5.4.2 Extrusion.- 5.4.3 Process control.- 5.5 Final product specifications.- 5.5.1 Quality control.- 5.5.2 Troubleshooting techniques.- 5.6 Evaluation of operational costs.- 5.7 Conclusion.- References.- 6 Confectionery extrusion.- 6.1 Introduction.- 6.2 Processing.- 6.2.1 Pre-extrusion processes.- 6.2.2 Cooker extruder profiling.- 6.2.3 Addition and subtraction of materials.- 6.2.4 Shaping and forming at the die.- 6.2.5 Post-extrusion processes.- 6.3 Flavours and other special ingredients for confectionery extrusion.- 6.4 Liquorice.- 6.5 Toffees, caramels and fudges.- 6.6 Boiled sweets.- 6.7 Sugar crust liqueurs.- 6.8 Pressed tablets.- 6.9 Creams, pastes and lozenges.- 6.10 Gums.- 6.11 Jellies.- 6.12 Cocoa and crumb.- 6.13 Chocolate.- 6.14 Reaction chamber products.- 6.15 Aerated confections.- 6.16 Chewing gum.- 6.17 Frozen confectionery.- 6.18.

Zustand: Good. 1st Edition. Ships from the UK. Former library book; may include library markings. Used book that is in clean, average condition without any missing pages.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - InhaltsangabeOperational Characteristics Of Twin-Screw Extrusion. Ingredient Composition. Breakfast Cereal Technology. Snack Products. Petfood and Fishfood. Confectionery Product Applications. Brewing Applications. References. Index.