fröhlich jochen (54 Ergebnisse)

Zustand: very good. Gut/Very good: Buch bzw. Schutzumschlag mit wenigen Gebrauchsspuren an Einband, Schutzumschlag oder Seiten. / Describes a book or dust jacket that does show some signs of wear on either the binding, dust jacket or pages.

xv, 608 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Zustand: New. In German.

25 cm. XV, 565 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. ERCOFTAC Series. Sprache: Englisch.

xx, 700p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Stamped. ERCOFTAC Series. Sprache: Englisch.

Zustand: New. pp. 232 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.

Zustand: New. In German.

Zustand: New. In.

Zustand: New. In.

Taschenbuch. Zustand: Neu. IUTAM Symposium on Advances in Micro- and Nanofluidics | Proceedings of the IUTAM Symposium on Advances in Micro- and Nanofluidics, Dresden, Germany, September 6-8, 2007 | Marco Ellero (u. a.) | Taschenbuch | xi | Englisch | 2011 | Springer | EAN 9789400726116 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: gut. Rechnung mit MwSt - Versand aus Deutschland pages.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Micro and nano-fluidics concerns fluid dynamics occurring in devices or flow configurations with minimum design length measured in micrometers or smaller. The behavior of fluids at these scales is quite different from that at the macroscopic level due to the presence of surface tension effects, wetting phenomena, Brownian diffusion and hydrodynamic interactions with immersed particles and microstructures. These effects cannot be generally represented in a classical homogeneous continuum framework. However, this triggers the development of new tools to investigate and simulate problems at the meso-scopic level.This book contains a collection of works presented at the IUTAM Symposium on Advances on Micro and Nano-fluidics held in Dresden in 2007. It covers several subjects of wide interest for micro and nano-fluidics applications focusing on both, analytical and numerical approaches. Topics covered in particular include multi-scale particle methods for numerical simulations, liquid-wall interactions and modeling approaches, modeling of immersed nano-scale structures, organized flow behavior at micro and nano-scales, and methods for control of micro- and nano-scale flows.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Micro and nano-fluidics concerns fluid dynamics occurring in devices or flow configurations with minimum design length measured in micrometers or smaller. The behavior of fluids at these scales is quite different from that at the macroscopic level due to the presence of surface tension effects, wetting phenomena, Brownian diffusion and hydrodynamic interactions with immersed particles and microstructures. These effects cannot be generally represented in a classical homogeneous continuum framework. However, this triggers the development of new tools to investigate and simulate problems at the meso-scopic level.This book contains a collection of works presented at the IUTAM Symposium on Advances on Micro and Nano-fluidics held in Dresden in 2007. It covers several subjects of wide interest for micro and nano-fluidics applications focusing on both, analytical and numerical approaches. Topics covered in particular include multi-scale particle methods for numerical simulations, liquid-wall interactions and modeling approaches, modeling of immersed nano-scale structures, organized flow behavior at micro and nano-scales, and methods for control of micro- and nano-scale flows.

Zustand: Wie neu. 1., Aufl. 400 S. Alle Bücher & Medienartikel von Book Broker sind stets in gutem & sehr gutem gebrauchsfähigen Zustand. Unser Produktfoto entspricht dem hier angebotenen Artikel, dieser weist folgende Merkmale auf: Helle/saubere Seiten in fester Bindung. Sprache: Deutsch Gewicht in Gramm: 499 Softcover, Maße: 16.3 cm x 2 cm x 22.5 cm.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 646 | Sprache: Englisch | Produktart: Bücher | The seventh ERCOFTAC Workshop on "Direct and Large-Eddy Simulation" (DLES-7) was held at the University of Treste from September 8-10, 2008. Following the tradition of previous workshops in the DLES-series this edition reflects the state of the art of numerical simulation of traditional and turbulent flows and provided an active forum for discussion of recent developments in simulation techniques and understanding of flow physics. At a fundamental level this workshop addressed numerous theoretical and physical aspects of transitional and turbulent flows. At an applied level it contributes to the solution of problems related to energy production, transportation and the environment. This book is of interest to scientists and engineers both at an early level in their career as well as at more senior levels.

Zustand: gut. With invoice - Shipment from Germany / Rechnung mit MwSt - Versand aus Deutschland pages.

Zustand: New.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Taschenbuch. Zustand: Neu. LESFOIL: Large Eddy Simulation of Flow Around a High Lift Airfoil | Results of the Project LESFOIL Supported by the European Union 1998 - 2001 | Lars Davidson (u. a.) | Taschenbuch | xi | Englisch | 2010 | Springer | EAN 9783642056055 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Direct and Large-Eddy Simulation VIII | Hans Kuerten (u. a.) | Taschenbuch | xii | Englisch | 2013 | Springer | EAN 9789400737631 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Direct and Large-Eddy Simulation X | Dimokratis G. E. Grigoriadis (u. a.) | Taschenbuch | xv | Englisch | 2018 | Springer | EAN 9783319874975 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 468 | Sprache: Englisch | Produktart: Bücher | This volume continues previous DLES proceedings books, presenting modern developments in turbulent flow research. It is comprehensive in its coverage of numerical and modeling techniques for fluid mechanics.After Surrey in 1994, Grenoble in 1996, Cambridge in 1999, Enschede in 2001, Munich in 2003, Poitiers in 2005, and Trieste in 2009, the 8th workshop, DLES8, was held in Eindhoven, The Netherlands, again under the auspices of ERCOFTAC. Following the spirit of the series, the goal of this workshop is to establish a state-of-the-art of DNS and LES techniques for the computation and modeling of transitional/turbulent flows covering a broad scope of topics such as aerodynamics, acoustics, combustion, multiphase flows, environment, geophysics and bio-medical applications. This gathering of specialists in the field  was a unique opportunity for discussions about the more recent advances in the prediction, understanding and control of turbulent flows in academic or industrial situations.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Large Eddy Simulation is a relatively new and still evolving computatio nal strategy for predicting turbulent flows. It is now widely used in research to elucidate fundamental interactions in physics of turbulence, to predict phe nomena which are closely linked to the unsteady features of turbulence and to create data bases against which statistical closure models can be asses sed. However, its applicability to complex industrial flows, to which statisti cal models are applied routinely, has not been established with any degree of confidence. There is, in particular, a question mark against the prospect of LES becoming an economically tenable alternative to Reynolds-averaged N avier-Stokes methods at practically high Reynolds numbers and in complex geometries. Aerospace flows pose particularly challenging problems to LES, because of the high Reynolds numbers involved, the need to resolve accura tely small-scale features in the thin and often transitional boundary layers developing on aerodynamic surfaces. When the flow also contains a separated region - due to high incidence, say - the range and disparity of the influen tial scales to be resolved is enormous, and this substantially aggravates the problems of resolution and cost. It is just this combination of circumstances that has been at the heart of the project LESFOIL to which this book is devoted. The project combined the efforts, resources and expertise of 9 partner organisations, 4 universities, 3 industrial companies and 2 research institu tes.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Large Eddy Simulation is a relatively new and still evolving computatio nal strategy for predicting turbulent flows. It is now widely used in research to elucidate fundamental interactions in physics of turbulence, to predict phe nomena which are closely linked to the unsteady features of turbulence and to create data bases against which statistical closure models can be asses sed. However, its applicability to complex industrial flows, to which statisti cal models are applied routinely, has not been established with any degree of confidence. There is, in particular, a question mark against the prospect of LES becoming an economically tenable alternative to Reynolds-averaged N avier-Stokes methods at practically high Reynolds numbers and in complex geometries. Aerospace flows pose particularly challenging problems to LES, because of the high Reynolds numbers involved, the need to resolve accura tely small-scale features in the thin and often transitional boundary layers developing on aerodynamic surfaces. When the flow also contains a separated region - due to high incidence, say - the range and disparity of the influen tial scales to be resolved is enormous, and this substantially aggravates the problems of resolution and cost. It is just this combination of circumstances that has been at the heart of the project LESFOIL to which this book is devoted. The project combined the efforts, resources and expertise of 9 partner organisations, 4 universities, 3 industrial companies and 2 research institu tes.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book addresses nearly all aspects of the state of the art in LES & DNS of turbulent flows, ranging from flows in biological systems and the environment to external aerodynamics, domestic and centralized energy production, combustion, propulsion as well as applications of industrial interest. Following the advances in increased computational power and efficiency, several contributions are devoted to LES & DNS of challenging applications, mainly in the area of turbomachinery, including flame modeling, combustion processes and aeroacoustics.The book includes work presented at the tenth Workshop on 'Direct and Large-Eddy Simulation' (DLES-10), which was hosted in Cyprus by the University of Cyprus, from May 27 to 29, 2015. The goal of the workshop was to establish a state of the art in DNS, LES and related techniques for the computation and modeling of turbulent and transitional flows. The book is of interest to scientists and engineers, both in the early stages of their career and at a more senior level.