ferrier jean louis oleg gusikhin kurosh (29 Ergebnisse)

2015. 420 Seiten Buch in neuwertigem Zustand. Wirkt unbenutzt. Lediglich Mini-BibSignatur auf Buchrücken und Barcode auf Vorsatz. 9783319108902 Sprache: Englisch Gewicht in Gramm: 771 Gebundene Ausgabe, Größe: 15.6 x 2.5 x 23.4 cm.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 336 | Sprache: Englisch | Produktart: Bücher.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 240 | Sprache: Englisch | Produktart: Bücher.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 336 | Sprache: Englisch | Produktart: Bücher.

Buch. Zustand: Neu. Neuware -The present book includes a set of selected papers from the eighth 'International Conference on Informatics in Control Automation and Robotics'(ICINCO 2011), held in Noordwijkerhout, The Netherlands, from 28 to 31 July 2011. The conference was organized in four simultaneous tracks: 'Intelligent Control Systems and Optimization', 'Robotics and Automation', 'Signal Processing, Sensors, Systems Modeling and Control' and 'Industrial Engineering, Production and Management'. The book is based on the same structure.ICINCO received 322 paper submissions, not including those of workshops or special sessions, from 52 countries, in all continents. After a double blind paper review performed by the Program Committee only 33 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 10%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2011.Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 240 pp. Englisch.

Buch. Zustand: Neu. Neuware -This book includes extended and revised versions of a set of selected papers from the Ninth International Conference on Informatics in Control Automation and Robotics (ICINCO 2012), held in Rome, Italy, from 28 to 31 July 2012. The conference was organized in four simultaneous tracks: Intelligent Control Systems and Optimization, Robotics and Automation, Systems Modeling, Signal Processing and Control and Industrial Engineering, Production and Management. ICINCO 2012 received 360 paper submissions, from 58 countries in all continents. From these, after a blind review process, only 40 were accepted as full papers, of which 20 were selected for inclusion in this book, based on the classifications provided by the Program Committee. The selected papers reflect the interdisciplinary nature of the conference as well as the logic equilibrium between the four abovementioned tracks. The diversity of topics is an important feature of this conference, enabling an overall perception of several important scientific and technological trends.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 336 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The present book includes a set of selected papers from the eighth 'International Conference on Informatics in Control Automation and Robotics'(ICINCO 2011), held in Noordwijkerhout, The Netherlands, from 28 to 31 July 2011. The conference was organized in four simultaneous tracks: 'Intelligent Control Systems and Optimization', 'Robotics and Automation', 'Signal Processing, Sensors, Systems Modeling and Control' and 'Industrial Engineering, Production and Management'. The book is based on the same structure. ICINCO received 322 paper submissions, not including those of workshops or special sessions, from 52 countries, in all continents. After a double blind paper review performed by the Program Committee only 33 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 10%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2011. Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book includes extended and revised versions of a set of selected papers from the Ninth International Conference on Informatics in Control Automation and Robotics (ICINCO 2012), held in Rome, Italy, from 28 to 31 July 2012. The conference was organized in four simultaneous tracks: Intelligent Control Systems and Optimization, Robotics and Automation, Systems Modeling, Signal Processing and Control and Industrial Engineering, Production and Management. ICINCO 2012 received 360 paper submissions, from 58 countries in all continents. From these, after a blind review process, only 40 were accepted as full papers, of which 20 were selected for inclusion in this book, based on the classifications provided by the Program Committee. The selected papers reflect the interdisciplinary nature of the conference as well as the logic equilibrium between the four abovementioned tracks. The diversity of topics is an important feature of this conference, enabling an overall perception of several important scientific and technological trends.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book includes extended and revised versions of a set of selected papers from the Ninth International Conference on Informatics in Control Automation and Robotics (ICINCO 2012), held in Rome, Italy, from 28 to 31 July 2012. The conference was organized in four simultaneous tracks: Intelligent Control Systems and Optimization, Robotics and Automation, Systems Modeling, Signal Processing and Control and Industrial Engineering, Production and Management. ICINCO 2012 received 360 paper submissions, from 58 countries in all continents. From these, after a blind review process, only 40 were accepted as full papers, of which 20 were selected for inclusion in this book, based on the classifications provided by the Program Committee. The selected papers reflect the interdisciplinary nature of the conference as well as the logic equilibrium between the four abovementioned tracks. The diversity of topics is an important feature of this conference, enabling an overall perception of several important scientific and technological trends.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The present book includes a set of selected papers from the eighth 'International Conference on Informatics in Control Automation and Robotics'(ICINCO 2011), held in Noordwijkerhout, The Netherlands, from 28 to 31 July 2011. The conference was organized in four simultaneous tracks: 'Intelligent Control Systems and Optimization', 'Robotics and Automation', 'Signal Processing, Sensors, Systems Modeling and Control' and 'Industrial Engineering, Production and Management'. The book is based on the same structure. ICINCO received 322 paper submissions, not including those of workshops or special sessions, from 52 countries, in all continents. After a double blind paper review performed by the Program Committee only 33 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 10%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2011. Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.

Taschenbuch. Zustand: Neu. Neuware -This book includes extended and revised versions of a set of selected papers from the Ninth International Conference on Informatics in Control Automation and Robotics (ICINCO 2012), held in Rome, Italy, from 28 to 31 July 2012. The conference was organized in four simultaneous tracks: Intelligent Control Systems and Optimization, Robotics and Automation, Systems Modeling, Signal Processing and Control and Industrial Engineering, Production and Management. ICINCO 2012 received 360 paper submissions, from 58 countries in all continents. From these, after a blind review process, only 40 were accepted as full papers, of which 20 were selected for inclusion in this book, based on the classifications provided by the Program Committee. The selected papers reflect the interdisciplinary nature of the conference as well as the logic equilibrium between the four abovementioned tracks. The diversity of topics is an important feature of this conference, enabling an overall perception of several important scientific and technological trends.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 336 pp. Englisch.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Hardcover. Zustand: Brand New. 2013 edition. 230 pages. 9.00x6.25x0.75 inches. In Stock.

Paperback. Zustand: Brand New. rep rev edition. 336 pages. 9.25x6.10x0.76 inches. In Stock.

Hardcover. Zustand: Brand New. 300 pages. 9.25x6.25x1.00 inches. In Stock.

Hardcover. Zustand: As New. No Jacket. Pages are clean and are not marred by notes or folds of any kind. ~ ThriftBooks: Read More, Spend Less 1.74.

Zustand: New.

Gebunden. Zustand: New.

Taschenbuch. Zustand: Neu. Neuware -The present book includes a set of selected papers from the tenth ¿International Conference on Informatics in Control Automation and Robotics¿ (ICINCO 2013), held in Reykjavík, Iceland, from 29 to 31 July 2013. The conference was organized in four simultaneous tracks: ¿Intelligent Control Systems and Optimization¿, ¿Robotics and Automation¿, ¿Signal Processing, Sensors, Systems Modeling and Control¿ and ¿Industrial Engineering, Production and Management¿. The book is based on the same structure.ICINCO 2013 received 255 paper submissions from 50 countries, in all continents. After a double blind paper review performed by the Program Committee only 30% were published and presented orally. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2013.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 440 pp. Englisch.

Buch. Zustand: Neu. Neuware -The present book includes a set of selected papers from the tenth ¿International Conference on Informatics in Control Automation and Robotics¿ (ICINCO 2013), held in Reykjavík, Iceland, from 29 to 31 July 2013. The conference was organized in four simultaneous tracks: ¿Intelligent Control Systems and Optimization¿, ¿Robotics and Automation¿, ¿Signal Processing, Sensors, Systems Modeling and Control¿ and ¿Industrial Engineering, Production and Management¿. The book is based on the same structure.ICINCO 2013 received 255 paper submissions from 50 countries, in all continents. After a double blind paper review performed by the Program Committee only 30% were published and presented orally. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2013.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 440 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The present book includes a set of selected papers from the tenth 'International Conference on Informatics in Control Automation and Robotics' (ICINCO 2013), held in Reykjavík, Iceland, from 29 to 31 July 2013. The conference was organized in four simultaneous tracks: 'Intelligent Control Systems and Optimization', 'Robotics and Automation', 'Signal Processing, Sensors, Systems Modeling and Control' and 'Industrial Engineering, Production and Management'. The book is based on the same structure.ICINCO 2013 received 255 paper submissions from 50 countries, in all continents. After a double blind paper review performed by the Program Committee only 30% were published and presented orally. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2013.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The present book includes a set of selected papers from the tenth 'International Conference on Informatics in Control Automation and Robotics' (ICINCO 2013), held in Reykjavík, Iceland, from 29 to 31 July 2013. The conference was organized in four simultaneous tracks: 'Intelligent Control Systems and Optimization', 'Robotics and Automation', 'Signal Processing, Sensors, Systems Modeling and Control' and 'Industrial Engineering, Production and Management'. The book is based on the same structure.ICINCO 2013 received 255 paper submissions from 50 countries, in all continents. After a double blind paper review performed by the Program Committee only 30% were published and presented orally. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2013.

Zustand: New. In.

Zustand: New. In.

Paperback. Zustand: Brand New. rep rev edition. 440 pages. 9.25x6.10x1.04 inches. In Stock.

Hardcover. Zustand: Brand New. 2015 edition. 440 pages. 9.30x6.20x1.20 inches. In Stock.