Dwivedi suren (13 Ergebnisse)
Weitere BilderCAD / CAM ROBOTICS AND FACTORIES OF THE FUTURE '90. VOLUME 2, FLEXIBLE AUTOMATION
Dwivedi, Suren N.; Verma, Alok K.; Sneckenberger, John E. [Editors]
Verlag: Springer-Verlag, 1991
- Hardcover
- Erstausgabe
Anbieter: Second Story Books, ABAA, Rockville, MD, USASecond Story Books, ABAA
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Gebraucht
EUR 40,74
EUR 6,15 VersandVersand innerhalb von USAAnzahl: 1 verfügbar
In den WarenkorbHardcover. First Edition. Large octavo. In Very Good condition. Red spines with black and white lettering. Contained in publisher's shrink wrap. Shrink wrap has tears to the corners, resulting in mild shelving wear. NOTE: Shelved in Netdesk Column U (ND-U). 1401962. FP New Rockville Stock.
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 61,22
EUR 14,02 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Hardcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 94,56
EUR 14,02 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 53,49
EUR 65,01 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Flexibility is as acceptable an objective for today's industrial community as is automation. Thus, the title of this conference proceedings volume - Flexible Automation - reflects an added emphasis to the usual industrial automation. As with general…automation that has impacted every component of the manufacturing office and plant, the identity of flexible automation can possess various forms and functions. The papers in this volume have been grouped into two main categories. One category deals with implementation of so-called 'intelligent manufacturing'. This means use of algorithmic methods and artificial intelligence approaches to various problems encountered in practical factory automation tasks. The placement of papers into five chapters of this part cannot be very precise, due to multidisciplinary nature and constant rapid change of the field. The categories are arranged starting from problems of enhancement of current factory settings, and followed by the papers addressing more specific issues of production planning, process technology and product engineering. The fifth chapter contains papers on the very important aspects of factory automation - problems of design, simulation, operation and monitoring of manufacturing cells.
Weitere Bilder- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 50,40
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. CAD/CAM Robotics and Factories of the Future '90 | Volume 2: Flexible Automation 5th International Conference on CAD/CAM, Robotics and Factories of the Future (CARS and FOF'90) Proceedings | Suren N. Dwivedi (u. a.) | Taschenbuch | xxxii | Englisch | 2012 | Springer | EAN 9783642635045 | Verantwortlich…e Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 116,77
EUR 14,02 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
CAD/CAM Robotics and Factories of the Future '90: Volume 2: Flexible Automation (Vol 2)
Dwivedi, Suren N. (Editor) / Verma, Alok K. (Editor) / Sneckenberger, John E. (Editor)
- Softcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 147,93
EUR 17,55 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Brand New. 1st edition. 637 pages. 9.21x6.14x1.44 inches. In Stock.
Weitere Bilder- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 95,25
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. CAD/CAM Robotics and Factories of the Future '90 | Volume 1: Concurrent Engineering 5th International Conference on CAD/CAM, Robotics, and Factories of the Future (CARS and FOF'90 Proceedings International Society for Productivity Enhancement | Suren N. Dwivedi (u. a.) | Taschenbuch | xxxi | Englisch |… 2011 | Springer | EAN 9783642843402 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
- Softcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 159,95
EUR 14,63 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Brand New. 615 pages. 9.25x6.10x1.40 inches. In Stock.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 106,99
EUR 64,63 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - According to the Concurrent Engineering Research Center (CERC) at West Virginia University, 'the concurrent engineering (CE) is a rapid simultaneous approach where research and development, design, manufacturing and support are carried out in paralle…l'. The mission of concurrent engineering is to reduce time to market, improve total quality and lower cost for products or systems developed and supported by large organizations. The purpose of the concurrent design methodology is to let the designer know the consequences of his design decisions in the manufacturing and assembly stages as well as in subsequent operations. Design for manufacture and assembly, design for reliability and testability, CAD/CAM/CAE, knowledge based systems, cost analysis and advanced material technology are the major constituents of concurrent engineering. The need for concurrent engineering can be justified from the fact that in every production cycle, the design phase approximately takes 5 to 10% of the total cycle, but overall it influences 80% of the production cycle. This volume contains articles from a wide spectrum dealing with concepts of concurrent engineering. The importance of the knowledge-based systems in the CE environment is significant as they provide the common platform to achieve the same level of expertise to the designers and manufacturers throughout the organization for the specific task. Their role in 'do it right the first time' is very important in providing aid to the designers and manufacturers to optimize the design and manufacturing setups for a cost effectiveness and reduced production time.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 106,99
EUR 69,64 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - According to the Concurrent Engineering Research Center (CERC) at West Virginia University, 'the concurrent engineering (CE) is a rapid simultaneous approach where research and development, design, manufacturing and support are carried out in paralle…l'. The mission of concurrent engineering is to reduce time to market, improve total quality and lower cost for products or systems developed and supported by large organizations. The purpose of the concurrent design methodology is to let the designer know the consequences of his design decisions in the manufacturing and assembly stages as well as in subsequent operations. Design for manufacture and assembly, design for reliability and testability, CAD/CAM/CAE, knowledge based systems, cost analysis and advanced material technology are the maj or constituents of concurrent engineering. The need for concurrent engineering can be justified from the fact that in every production cycle, the design phase approximately takes 5 to 10% of the total cycle, but overall it influences 80% of the production cycle. This volume contains articles from a wide spectrum dealing with concepts of concurrent engineering. The importance of the knowledge-based systems in the CE environment is significant as they provide the common platform to achieve the same level of expertise to the designers and manufacturers throughout the organization for the specific task. Their role in 'do it right the first time' is very important in providing aid to the designers and manufacturers to optimize the design and manufacturing setups for a cost effectiveness and reduced production time.
- Softcover
Anbieter: Buchpark, Trebbin, DeutschlandBuchpark
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Sehr gut
EUR 81,14
EUR 105,00 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 1292 | Sprache: Englisch | Produktart: Bücher | According to the Concurrent Engineering Research Center (CERC) at West Virginia University, "the concurrent engineering (CE) is a rapid simultaneous approach where research and development, design, manufacturing and support are carried… out in parallel". The mission of concurrent engineering is to reduce time to market, improve total quality and lower cost for products or systems developed and supported by large organizations. The purpose of the concurrent design methodology is to let the designer know the consequences of his design decisions in the manufacturing and assembly stages as well as in subsequent operations. Design for manufacture and assembly, design for reliability and testability, CAD/CAM/CAE, knowledge based systems, cost analysis and advanced material technology are the maj or constituents of concurrent engineering. The need for concurrent engineering can be justified from the fact that in every production cycle, the design phase approximately takes 5 to 10% of the total cycle, but overall it influences 80% of the production cycle. This volume contains articles from a wide spectrum dealing with concepts of concurrent engineering. The importance of the knowledge-based systems in the CE environment is significant as they provide the common platform to achieve the same level of expertise to the designers and manufacturers throughout the organization for the specific task. Their role in "do it right the first time" is very important in providing aid to the designers and manufacturers to optimize the design and manufacturing setups for a cost effectiveness and reduced production time.
Weitere BilderCAD / CAM ROBOTICS AND FACTORIES OF THE FUTURE '90 [Two Volumes, Complete]
Dwivedi, Suren N.; Verma, Alok K.; Sneckenberger, John E. [Editors]
Verlag: Springer-Verlag, 1991
- Hardcover
- Erstausgabe
Anbieter: Second Story Books, ABAA, Rockville, MD, USASecond Story Books, ABAA
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Gebraucht
EUR 81,48
EUR 6,15 VersandVersand innerhalb von USAAnzahl: 1 verfügbar
In den WarenkorbHardcover. First Edition. Large octavo, two volumes. In Very Good condition. Red spines with black and white lettering. Contained in publisher's shrink wrap. Volumes have minor shelving wear. Volume 1 shrink wrap has small holes to the rear cover. Volume 2 shrink wrap has tears to the corners and front surface, resulting in rubb…ing wear. Shelved in Locked Annex Area, Multi-Volume Area (ND-MV). 1401958. FP New Rockville Stock.
