De borst (48 Ergebnisse)

Zustand: Good. First Edition. STERCK DOOR EIGEN MERCK.

1e dr. - Geniet, oblong formaat.

2007th ed. 17 x 25 cm. 445 pages. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Zustand: Very Good. De Jager, Gerrit; Vleeschouwer, Willem; De Wit, Peter (illustrator).

Zustand: Very Good. De Jager, Gerrit; De Wit, Peter (illustrator).

Zustand: Very Good. De Jager, Gerrit; Vleeschouwer, Willem (illustrator).

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New. In English.

Zustand: New. pp. 540.

Zustand: Used: Like New. Relié, comme neuf.

Zustand: New. In English.

Zustand: New. In English.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Composite materials are heterogeneous by nature, and are intended to be, since only the combination of different constituent materials can give them the desired combination of low weight, stiffness and strength. At present, the knowledge has advanced to a level that materials can be tailored to exhibit certain, required properties. At the same time, the fact that these materials are composed of various, sometimes very different constituents, make their mechanical behaviour complex. This observation holds with respect to the deformation behaviour, but especially with respect to the failure behaviour, where complicated and unconventional failure modes have been observed. It is a challenge to develop predictive methods that can capture this complex mechanical behaviour, either using analytical tools, or using numerical me- ods, the nite element method being the most widespread among the latter. In this respect, developments have gone fast over the past decade. Indeed, we have seen a paradigm shift in computational approaches to (composite) ma- rial behaviour. Where only a decade ago it was still customary to carry out analyses of deformation and failure at a macroscopic level of observation only - one may call this a phenomenological approach - nowadays this approach is being progressively replaced by multiscale methods. In such methods it is r- ognized a priori that the overall behaviour is highly dependent on local details and aws.…

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This work gives a modern, up-to-date account of recent developments in computational multiscale mechanics. Both upscaling and concurrent computing methodologies will be addressed for a range of application areas in computational solid and fluid mechanics: Scale transitions in materials, turbulence in fluid-structure interaction problems, multiscale/multilevel optimization, multiscale poromechanics.A Dutch-German research group that consists of qualified and well-known researchers in the field has worked for six years on the topic of computational multiscale mechanics. This text provides a unique opportunity to consolidate and disseminate the knowledge gained in this project. The addition of chapters written by experts outside this working group providesa broad and multifaceted view of this rapidly evolving field.…

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This work gives a modern, up-to-date account of recent developments in computational multiscale mechanics. Both upscaling and concurrent computing methodologies will be addressed for a range of application areas in computational solid and fluid mechanics: Scale transitions in materials, turbulence in fluid-structure interaction problems, multiscale/multilevel optimization, multiscale poromechanics.A Dutch-German research group that consists of qualified and well-known researchers in the field has worked for six years on the topic of computational multiscale mechanics. This text provides a unique opportunity to consolidate and disseminate the knowledge gained in this project. The addition of chapters written by experts outside this working group providesa broad and multifaceted view of this rapidly evolving field.…

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Composite materials are heterogeneous by nature, and are intended to be, since only the combination of different constituent materials can give them the desired combination of low weight, stiffness and strength. At present, the knowledge has advanced to a level that materials can be tailored to exhibit certain, required properties. At the same time, the fact that these materials are composed of various, sometimes very different constituents, make their mechanical behaviour complex. This observation holds with respect to the deformation behaviour, but especially with respect to the failure behaviour, where complicated and unconventional failure modes have been observed. It is a challenge to develop predictive methods that can capture this complex mechanical behaviour, either using analytical tools, or using numerical me- ods, the nite element method being the most widespread among the latter. In this respect, developments have gone fast over the past decade. Indeed, we have seen a paradigm shift in computational approaches to (composite) ma- rial behaviour. Where only a decade ago it was still customary to carry out analyses of deformation and failure at a macroscopic level of observation only - one may call this a phenomenological approach - nowadays this approach is being progressively replaced by multiscale methods. In such methods it is r- ognized a priori that the overall behaviour is highly dependent on local details and aws.…

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - In recent years, discretization methods have been proposed which are more flexible and which have the potential of capturing (moving) discontinuities in a robust and efficient manner. This monograph assembles contributions of leading experts with the most recent developments in this rapidly evolving field. It provides the most comprehensive coverage of state-of-the art numerical methods for treating discontinuities in mechanics.…

Zustand: New. 2012. 2nd Edition. Hardcover. Built upon the two original books by Mike Crisfield and their own lecture notes, renowned scientist Rene de Borst and his team offer a thoroughly updated yet condensed edition that retains and builds upon the excellent reputation and appeal amongst students and engineers alike for which Crisfield's first edition is acclaimed. Series: Wiley Series in Computational Mechanics. Num Pages: 540 pages, Illustrations. BIC Classification: TGB; TNC. Category: (P) Professional & Vocational. Dimension: 251 x 171 x 29. Weight in Grams: 948. . . . . . Books ship from the US and Ireland.…

Paperback. Zustand: Brand New. 252 pages. 9.25x6.10x0.57 inches. In Stock.

Taschenbuch. Zustand: Neu. IUTAM Symposium on Discretization Methods for Evolving Discontinuities | Proceedings of the IUTAM Symposium held Lyon, France, 4 - 7 September, 2006 | Alain Combescure (u. a.) | Taschenbuch | ix | Englisch | 2011 | Springer | EAN 9789048176595 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Taschenbuch. Zustand: Neu. Multiscale Methods in Computational Mechanics | Progress and Accomplishments | René De Borst (u. a.) | Taschenbuch | xviii | Englisch | 2012 | Springer | EAN 9789400733862 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Paperback. Zustand: Brand New. 445 pages. 9.25x6.10x1.01 inches. In Stock.

Paperback. Zustand: Brand New. 2011 edition. 464 pages. 9.25x6.10x1.09 inches. In Stock.

Zustand: New.

Hardcover. Zustand: Brand New. 2nd edition. 560 pages. 9.84x6.85x1.18 inches. In Stock.

Zustand: New. In English.

Paperback. Zustand: Brand New. 190 pages. 8.75x5.75x0.50 inches. In Stock.

Zustand: New. In English.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Taschenbuch. Zustand: Neu. Computational Methods for Fracture in Porous Media | Isogeometric and Extended Finite Element Methods | René De Borst | Taschenbuch | Englisch | 2017 | Elsevier Science | EAN 9780081009178 | Verantwortliche Person für die EU: Elsevier B.V., Radarweg 29, 1043 NX AMSTERDAM, NIEDERLANDE, productsafety[at]elsevier[dot]com | Anbieter: preigu. …