Campilho raul (35 Ergebnisse)

Zustand: New.

Zustand: As New. Unread book in perfect condition.

Zustand: As New. Unread book in perfect condition.

Paperback. Zustand: Brand New. 2012 edition. 157 pages. 9.25x6.25x0.25 inches. In Stock.

Zustand: As New. Unread book in perfect condition.

Zustand: As New. Unread book in perfect condition.

Zustand: New.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book deals with the most recent numerical modeling of adhesive joints. Advances in damage mechanics and extended finite element method are described in the context of the Finite Element method with examples of application. The book also introduces the classical continuum mechanics and fracture mechanics approach and discusses the boundary element method and the finite difference method with indication of the cases they are most adapted to. At the moment there a no numerical technique that can solve any problem and the analyst needs to be aware of the limitations involved in each case.…

Zustand: As New. Unread book in perfect condition.

Paperback. Zustand: Brand New. 244 pages. 8.66x5.91x0.55 inches. In Stock.

Zustand: As New. Unread book in perfect condition.

Zustand: New.

Zustand: New. Raul D. S. G. Campilho is affiliated with Instituto Superior de Engenharia do Porto, Portugal.Adhesively-bonded joints provide many advantages over conventional mechanical fasteners and are increasingly receiving attention.

Paperback. Zustand: Brand New. 421 pages. 9.21x6.14x0.87 inches. In Stock.

Taschenbuch. Zustand: Neu. Neuware.

Zustand: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | This book presents an experimental and numerical analysis of a composite Single-Leg Bending (SLB) bonded joint with three adhesives. A J-integral formulation was considered to obtain the energy release rate for mode I and II, tensile (JI) and shear (JII), respectively, whereas the cohesive laws are attained by differentiation of the JI-w0 and JII-¿0 curves, where w0 and ¿0 are the local normal separation and local tangential slip at the crack tip, respectively. Afterwards, the fracture analysis was performed, where the experimental results were compared through load-displacement (P-¿) curves. The JI and JII values were analysed by R curves and fracture envelopes. These latter were used to establish which criterion was more suitable for each adhesive type. For last, the tensile and shear stresses were determined through the cohesive laws, attained by the direct method. Overall, a good agreement on the fracture properties was obtained between specimens of the same adhesive. Moreover, the cohesive laws also presented a good correspondence between specimens, and will enable the design of adhesively-bonded joints with arbitrary geometry.…

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 968 | Sprache: Englisch | Produktart: Bücher | This book reports on cutting-edge research and developments in manufacturing, giving a special emphasis to solutions fostering automation and sustainability. Topics cover manufacturing process optimization, remanufacturing, machines and mechanical design, CAD/CAM/CAE, materials characterization and processing, measurement and predictive maintenance techniques. Further topics include artificial intelligence and IoT in manufacturing, robotics, and cutting-edge issues in Industry 4.0/5.0. Based on proceedings of the 32nd edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2023, held on June 18 ¿ 22, 2023, in Porto, Portugal, this first volume of a 2-volume set provides academics and professionals with extensive, technical information on trends and technologies in manufacturing, yet it also discusses challenges and practice-oriented experience in all the above-mentioned areas.…

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

HRD. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Taschenbuch. Zustand: Neu. Advances in Design, Simulation and Manufacturing VIII | Proceedings of the 8th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal - Volume 2: Mechanical Engineering | Raul D. Campilho (u. a.) | Taschenbuch | xv | Englisch | 2025 | Springer | EAN 9783031952173 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on advances in mechanical engineering, with a special emphasis on innovative design approaches, constructions and working processes, and on intelligent devices. It discusses physical aspects during pressing and vibrational processing, and findings relating to static stiffness and wear resistance. Further chapters report on the modeling and simulation of mechanical systems using mathematical modeling, numerical simulation, and experimental studies. This book also describes the use of LabVIEW, an infrared camera, and acoustic technology for the control and diagnostic of air leaks and radial runout of gear wheels. It discusses topics concerning the efficiency of systems and processes, reporting on new strategies for improving the design and operation of hydraulic machine rotors, screw and roller presses, and homogenizers, among others. Based on the 8th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2025), held on June 17-20, 2025, in Porto, Portugal, this second volume of a 4-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned.…

Zustand: As New. Unread book in perfect condition.

Hardcover. Zustand: Brand New. 413 pages. 9.50x6.50x1.00 inches. In Stock.

Zustand: New. pp. 421.

Taschenbuch. Zustand: Neu. Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems | Proceedings of FAIM 2023, June 18-22, 2023, Porto, Portugal, Volume 1: Modern Manufacturing | Francisco J. G. Silva (u. a.) | Taschenbuch | xxii | Englisch | 2023 | Springer | EAN 9783031382406 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.…

Zustand: New. Raul D. S. G. Campilho is affiliated with Instituto Superior de Engenharia do Porto, Portugal.Adhesively-bonded joints provide many advantages over conventional mechanical fasteners and are increasingly receiving attention as .

Paperback. Zustand: Brand New. 297 pages. 9.25x6.10x9.21 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on cutting-edge research and developments in manufacturing, giving a special emphasis to solutions fostering automation and sustainability. Topics cover manufacturing process optimization, remanufacturing, machines and mechanical design, CAD/CAM/CAE, materials characterization and processing, measurement and predictive maintenance techniques. Further topics include artificial intelligence and IoT in manufacturing, robotics, and cutting-edge issues in Industry 4.0/5.0. Based on proceedings of the 32ndedition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2023, held on June 18 - 22, 2023, in Porto, Portugal,this first volume of a 2-volume set provides academics and professionals with extensive, technical information on trends and technologies in manufacturing, yet it also discusses challenges and practice-oriented experience in all the above-mentioned areas. …

Paperback. Zustand: Brand New. 296 pages. 6.14x0.62x9.21 inches. In Stock.

Buch. Zustand: Neu. Neuware.