bert jüttler (39 Ergebnisse)

Hardcover. Zustand: Near Fine. Zustand des Schutzumschlags: Poor.

Hardcover. Zustand: Good. No Jacket. Former library book; Missing dust jacket; Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.

Hardcover. Zustand: As New. No Jacket. 1st Edition. Book.

Zustand: New. pp. viii + 232 Illus.

102 fig., VI, 237 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,550grams, ISBN:9783540232742.

Paperback. Zustand: Brand New. 150 pages. German language. 9.50x6.50x0.50 inches. In Stock.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New. pp. 248 Illus.

Zustand: New. pp. 628 Illus.

Zustand: New.

Paperback. Zustand: Brand New. reprint edition. 304 pages. 9.25x6.10x0.69 inches. In Stock.

Hardcover. Zustand: Brand New. 1st edition. 231 pages. 9.25x6.25x0.50 inches. In Stock.

Hardcover. Zustand: Brand New. 500 pages. 9.25x6.25x0.75 inches. In Stock.

Taschenbuch. Zustand: Neu. Neuware -GeometricModelingandProcessing(GMP)isabiennialinternationalconference on geometric modeling, simulation and computing, which provides researchers and practitioners with a forum for exchanging new ideas, discussing new app- cations, and presenting new solutions. Previous GMP conferences were held in Pittsburgh (2006), Beijing (2004), Tokyo (2002), and Hong Kong (2000). This, the 5th GMP conference, was held in Hangzhou, one of the most beautiful cities in China. GMP 2008 received 113 paper submissions, covering a wide spectrum of - ometric modeling and processing, such as curves and surfaces, digital geometry processing, geometric feature modeling and recognition, geometric constraint solving, geometric optimization, multiresolution modeling, and applications in computer vision, image processing, scienti c visualization, robotics and reverse engineering. Each paper was reviewed by at least three members of the program committee andexternalreviewers.Basedonthe recommendations ofthe revi- ers, 34 regular papers were selected for oral presentation, and 17 short papers were selected for poster presentation. All selected papers are included in these proceedings. We thank all authors, external reviewers and program committee members for their great e ort and contributions, which made this conference a success.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 628 pp. Englisch.

Buch. Zustand: Neu. Neuware -The two elds of Geometric Modeling and Algebraic Geometry, though closely - lated, are traditionally represented by two almost disjoint scienti c communities. Both elds deal with objects de ned by algebraic equations, but the objects are studied in different ways. While algebraic geometry has developed impressive - sults for understanding the theoretical nature of these objects, geometric modeling focuses on practical applications of virtual shapes de ned by algebraic equations. Recently, however, interaction between the two elds has stimulated new research. For instance, algorithms for solving intersection problems have bene ted from c- tributions from the algebraic side. The workshop series on Algebraic Geometry and Geometric Modeling (Vilnius 1 2 2002 , Nice 2004 ) and on Computational Methods for Algebraic Spline Surfaces 3 (Kefermarkt 2003 , Oslo 2005) have provided a forum for the interaction between the two elds. The present volume presents revised papers which have grown out of the 2005 Oslo workshop, which was aligned with the nal review of the European project GAIA II, entitled Intersection algorithms for geometry based IT-applications 4 using approximate algebraic methods (IST 2001-35512) .Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 240 pp. Englisch.

Buch. Zustand: Neu. Neuware -Isogeometric Analysis is a groundbreaking computational approach that promises the possibility of integrating the finite element method into conventional spline-based CAD design tools. It thus bridges the gap between numerical analysis and geometry, and moreover it allows to tackle new cutting edge applications at the frontiers of research in science and engineering. This proceedings volume contains a selection of outstanding research papers presented at the second International Workshop on Isogeometric Analysis and Applications, held at Annweiler, Germany, in April 2014.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 304 pp. Englisch.

Taschenbuch. Zustand: Neu. Neuware -Isogeometric Analysis is a groundbreaking computational approach that promises the possibility of integrating the finite element method into conventional spline-based CAD design tools. It thus bridges the gap between numerical analysis and geometry, and moreover it allows to tackle new cutting edge applications at the frontiers of research in science and engineering. This proceedings volume contains a selection of outstanding research papers presented at the second International Workshop on Isogeometric Analysis and Applications, held at Annweiler, Germany, in April 2014.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 304 pp. Englisch.

Zustand: New.

Paperback. Zustand: Brand New. 1st edition. 606 pages. 9.25x6.25x1.50 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The two elds of Geometric Modeling and Algebraic Geometry, though closely - lated, are traditionally represented by two almost disjoint scienti c communities. Both elds deal with objects de ned by algebraic equations, but the objects are studied in different ways. While algebraic geometry has developed impressive - sults for understanding the theoretical nature of these objects, geometric modeling focuses on practical applications of virtual shapes de ned by algebraic equations. Recently, however, interaction between the two elds has stimulated new research. For instance, algorithms for solving intersection problems have bene ted from c- tributions from the algebraic side. The workshop series on Algebraic Geometry and Geometric Modeling (Vilnius 1 2 2002 , Nice 2004 ) and on Computational Methods for Algebraic Spline Surfaces 3 (Kefermarkt 2003 , Oslo 2005) have provided a forum for the interaction between the two elds. The present volume presents revised papers which have grown out of the 2005 Oslo workshop, which was aligned with the nal review of the European project GAIA II, entitled Intersection algorithms for geometry based IT-applications 4 using approximate algebraic methods (IST 2001-35512) .

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This volume contains revised papers that were presented at the international workshop entitled Computational Methods for Algebraic Spline Surfaces ('COMPASS'), which was held from September 29 to October 3, 2003, at Schloß Weinberg, Kefermarkt (A- tria). The workshop was mainly devoted to approximate algebraic geometry and its - plications. The organizers wanted to emphasize the novel idea of approximate implici- zation, that has strengthened the existing link between CAD / CAGD (Computer Aided Geometric Design) and classical algebraic geometry. The existing methods for exact implicitization (i. e. , for conversion from the parametric to an implicit representation of a curve or surface) require exact arithmetic and are too slow and too expensive for industrial use. Thus the duality of an implicit representation and a parametric repres- tation is only used for low degree algebraic surfaces such as planes, spheres, cylinders, cones and toroidal surfaces. On the other hand, this duality is a very useful tool for - veloping ef cient algorithms. Approximate implicitization makes this duality available for general curves and surfaces. The traditional exact implicitization of parametric surfaces produce global rep- sentations, which are exact everywhere. The surface patches used in CAD, however, are always de ned within a small box only; they are obtained for a bounded parameter domain (typically a rectangle, or - in the case of 'trimmed' surface patches - a subset of a rectangle). Consequently, a globally exact representation is not really needed in practice.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Isogeometric Analysis is a groundbreaking computational approach that promises the possibility of integrating the finite element method into conventional spline-based CAD design tools. It thus bridges the gap between numerical analysis and geometry, and moreover it allows to tackle new cutting edge applications at the frontiers of research in science and engineering. This proceedings volume contains a selection of outstanding research papers presented at the second International Workshop on Isogeometric Analysis and Applications, held at Annweiler, Germany, in April 2014.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The two elds of Geometric Modeling and Algebraic Geometry, though closely - lated, are traditionally represented by two almost disjoint scienti c communities. Both elds deal with objects de ned by algebraic equations, but the objects are studied in different ways. While algebraic geometry has developed impressive - sults for understanding the theoretical nature of these objects, geometric modeling focuses on practical applications of virtual shapes de ned by algebraic equations. Recently, however, interaction between the two elds has stimulated new research. For instance, algorithms for solving intersection problems have bene ted from c- tributions from the algebraic side. The workshop series on Algebraic Geometry and Geometric Modeling (Vilnius 1 2 2002 , Nice 2004 ) and on Computational Methods for Algebraic Spline Surfaces 3 (Kefermarkt 2003 , Oslo 2005) have provided a forum for the interaction between the two elds. The present volume presents revised papers which have grown out of the 2005 Oslo workshop, which was aligned with the nal review of the European project GAIA II, entitled Intersection algorithms for geometry based IT-applications 4 using approximate algebraic methods (IST 2001-35512) .

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Isogeometric Analysis is a groundbreaking computational approach that promises the possibility of integrating the finite element method into conventional spline-based CAD design tools. It thus bridges the gap between numerical analysis and geometry, and moreover it allows to tackle new cutting edge applications at the frontiers of research in science and engineering. This proceedings volume contains a selection of outstanding research papers presented at the second International Workshop on Isogeometric Analysis and Applications, held at Annweiler, Germany, in April 2014.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - GeometricModelingandProcessing(GMP)isabiennialinternationalconferen ce on geometric modeling, simulation and computing, which provides researchers and practitioners with a forum for exchanging new ideas, discussing new app- cations, and presenting new solutions. Previous GMP conferences were held in Pittsburgh (2006), Beijing (2004), Tokyo (2002), and Hong Kong (2000). This, the 5th GMP conference, was held in Hangzhou, one of the most beautiful cities in China. GMP 2008 received 113 paper submissions, covering a wide spectrum of - ometric modeling and processing, such as curves and surfaces, digital geometry processing, geometric feature modeling and recognition, geometric constraint solving, geometric optimization, multiresolution modeling, and applications in computer vision, image processing, scienti c visualization, robotics and reverse engineering. Each paper was reviewed by at least three members of the program committee andexternalreviewers.Basedonthe recommendations ofthe revi- ers, 34 regular papers were selected for oral presentation, and 17 short papers were selected for poster presentation. All selected papers are included in these proceedings. We thank all authors, external reviewers and program committee members for their great e ort and contributions, which made this conference a success.

Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.