aurich jan (29 Ergebnisse)

hardcover. Zustand: Very Good.

Zustand: New. In.

Zustand: New. In.

Zustand: new.

Zustand: New. In.

hardcover. Zustand: Gut. 308 Seiten; 9783031357787.3 Gewicht in Gramm: 1.

Paperback. Zustand: Brand New. 308 pages. 9.25x6.10x0.65 inches. In Stock.

Hardcover. Zustand: Brand New. 308 pages. 9.25x6.10x0.91 inches. In Stock.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, theUniversity of California Berkeley,and University of California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, theUniversity of California Berkeley,and University of California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.

Taschenbuch. Zustand: Neu. Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes | Jan C. Aurich (u. a.) | Taschenbuch | xiii | Englisch | 2023 | Springer | EAN 9783031357817 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 312 | Sprache: Englisch | Produktart: Bücher | This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, the University of California Berkeley, and University of California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 312 | Sprache: Englisch | Produktart: Bücher | This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, the University of California Berkeley, and University of California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 312 | Sprache: Englisch | Produktart: Bücher | This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, the University of California Berkeley, and University of California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.

Zustand: New. In.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 456 | Sprache: Englisch | Produktart: Bücher | This book sheds new light on component surfaces and the scientific fundamentals of their creation, characterization, and application. The book also provides a new interdisciplinary perspective on the topic, studying component surfaces with a multiscale approach and linking fundamental and applied research. The book builds on the success of the coordinated research project funded by Deutsche Forschungsgemeinschaft (DFG) from 2011 ¿ 2023: the CollaborativeResearch Center CRC 926 ¿Microscale Morphology of Component Surfaces (MI-COS)¿, in which, over the years, 100+ researchers have co-operated at the University of Kaiserslautern, Germany, and affiliated institutes, yielding 500+ scientific papers in journals from different fields of science and engineering. Divided into 2 main parts, the book starts with an introduction to the concept of Manufacturing-Morphology-Property (MMP) Relationships and dives into the fundamentals and technologies, including topics such as the geometrical, microstructural, and chemical characterization, indentation, and scratching on the nanoscale, micro milling and micro grinding, cryogenic machining, cold spraying, and additive manufacturing. In the first part, readers discover more about the interactions between particles and surfaces, the interrelationship of manufacturing, surface morphology and properties of titanium, the influence of manufacturing and load conditions on the phase transformation and fatigue of austenitic stainless steels, and the influence of surface morphology on fatigue and tribological behavior of Transformation-Induced-Plasticity (TRIP)/Twinning-Induced Plasticity (TWIP) Steels. The second part of this book is devoted to the applications of component surfaces, covering topics like the manufacturing of areal material measures, MMP relationships for rotating shaft sealing systems, the influence of the surface morphology on rolling bearing life under mixed lubrication, MMP relationships for chain joints, and MMP for biofilms. Scientists and engineers who deal with the influence of surfaces on macroscopic properties of components and who are interested in designing and manufacturing these surfaces to obtain desired component properties will understand the appeal of this work. Given its interdisciplinary breadth, the book also appeals to scholars and professionals in the fields of mechanical engineering, process engineering, and physics.

Gebundene Ausgabe. Zustand: Wie neu. Gebraucht - Wie neu eingeschweißt, unbenutzt -In many machining operations burrs cannot be avoided. They can affect the functionality and the safe handling of the workpiece in the subsequent processing, and have to be removed by a special deburring process. Toleration of burrs, which are not part of functional edges, depends on their respective shape and size. High inspection effort is necessary to guarantee the workpiece quality. Therefore, the research results on burrs, with a focus on burr analysis and control as well as on cleanability and burr removal based on the presentations held at the conference are valuable for researchers and engineers in manufacturing development.

Taschenbuch. Zustand: Neu. Component Surfaces | Manufacturing-Morphology-Property Relationships | Jan C. Aurich (u. a.) | Taschenbuch | Springer Series in Advanced Manufacturing | xiv | Englisch | 2024 | Springer | EAN 9783031355776 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Burrs - Analysis, Control and Removal | Proceedings of the CIRP International Conference on Burrs, 2nd-3rd April, 2009, University of Kaiserslautern, Germany | Jan C. Aurich (u. a.) | Taschenbuch | xviii | Englisch | 2014 | Springer | EAN 9783642424915 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book sheds new light on component surfaces and the scientific fundamentals of their creation, characterization, and application. The book also provides a new interdisciplinary perspective on the topic, studying component surfaces with a multiscale approach and linking fundamental and applied research. The book builds on the success of the coordinated research project funded by Deutsche Forschungsgemeinschaft (DFG) from 2011 - 2023: the CollaborativeResearch Center CRC 926 'Microscale Morphology of Component Surfaces (MI-COS)', in which, over the years, 100+ researchers have co-operated at the University of Kaiserslautern, Germany, and affiliated institutes, yielding 500+ scientific papers in journals from different fields of science and engineering.Divided into 2 main parts, the book starts with an introduction to the concept of Manufacturing-Morphology-Property (MMP) Relationships and dives into the fundamentals and technologies, including topics such as the geometrical, microstructural, and chemical characterization, indentation, and scratching on the nanoscale, micro milling and micro grinding, cryogenic machining, cold spraying, and additive manufacturing. In the first part, readers discover more about the interactions between particles and surfaces, the interrelationship of manufacturing, surface morphology and properties of titanium, the influence of manufacturing and load conditions on the phase transformation and fatigue of austenitic stainless steels, and the influence of surface morphology on fatigue and tribological behavior of Transformation-Induced-Plasticity (TRIP)/Twinning-Induced Plasticity (TWIP) Steels. The second part of this book is devoted to the applications of component surfaces, covering topics like the manufacturing of areal material measures, MMP relationships for rotating shaft sealing systems, the influence of the surface morphology on rolling bearing life under mixed lubrication, MMP relationships for chain joints, and MMP for biofilms.Scientists and engineers who deal with the influence of surfaces on macroscopic properties of components and who are interested in designing and manufacturing these surfaces to obtain desired component properties will understand the appeal of this work. Given its interdisciplinary breadth, the book also appeals to scholars and professionals in the fields of mechanical engineering, process engineering, and physics.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book sheds new light on component surfaces and the scientific fundamentals of their creation, characterization, and application. The book also provides a new interdisciplinary perspective on the topic, studying component surfaces with a multiscale approach and linking fundamental and applied research. The book builds on the success of the coordinated research project funded by Deutsche Forschungsgemeinschaft (DFG) from 2011 - 2023: the CollaborativeResearch Center CRC 926 'Microscale Morphology of Component Surfaces (MI-COS)', in which, over the years, 100+ researchers have co-operated at the University of Kaiserslautern, Germany, and affiliated institutes, yielding 500+ scientific papers in journals from different fields of science and engineering.Divided into 2 main parts, the book starts with an introduction to the concept of Manufacturing-Morphology-Property (MMP) Relationships and dives into the fundamentals and technologies, including topics such as the geometrical, microstructural, and chemical characterization, indentation, and scratching on the nanoscale, micro milling and micro grinding, cryogenic machining, cold spraying, and additive manufacturing. In the first part, readers discover more about the interactions between particles and surfaces, the interrelationship of manufacturing, surface morphology and properties of titanium, the influence of manufacturing and load conditions on the phase transformation and fatigue of austenitic stainless steels, and the influence of surface morphology on fatigue and tribological behavior of Transformation-Induced-Plasticity (TRIP)/Twinning-Induced Plasticity (TWIP) Steels. The second part of this book is devoted to the applications of component surfaces, covering topics like the manufacturing of areal material measures, MMP relationships for rotating shaft sealing systems, the influence of the surface morphology on rolling bearing life under mixed lubrication, MMP relationships for chain joints, and MMP for biofilms.Scientists and engineers who deal with the influence of surfaces on macroscopic properties of components and who are interested in designing and manufacturing these surfaces to obtain desired component properties will understand the appeal of this work. Given its interdisciplinary breadth, the book also appeals to scholars and professionals in the fields of mechanical engineering, process engineering, and physics.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - In many machining operations burrs cannot be avoided. They can affect the functionality and the safe handling of the workpiece in the subsequent processing, and have to be removed by a special deburring process. Toleration of burrs, which are not part of functional edges, depends on their respective shape and size. High inspection effort is necessary to guarantee the workpiece quality. Therefore, the research results on burrs, with a focus on burr analysis and control as well as on cleanability and burr removal based on the presentations held at the conference are valuable for researchers and engineers in manufacturing development.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - In many machining operations burrs cannot be avoided. They can affect the functionality and the safe handling of the workpiece in the subsequent processing, and have to be removed by a special deburring process. Toleration of burrs, which are not part of functional edges, depends on their respective shape and size. High inspection effort is necessary to guarantee the workpiece quality. Therefore, the research results on burrs, with a focus on burr analysis and control as well as on cleanability and burr removal based on the presentations held at the conference are valuable for researchers and engineers in manufacturing development.

Hardcover. Zustand: Brand New. 456 pages. 9.25x6.10x1.14 inches. In Stock.

Zustand: New. In German.

Hardcover. Zustand: Brand New. 184 pages. German language. 9.20x6.20x0.60 inches. In Stock.

Zustand: Gut. Zustand: Gut | Sprache: Deutsch | Produktart: Bücher | Keine Beschreibung verfügbar.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Während sich produzierende Unternehmen bisher vornehmlich auf die Entwicklung, die Produktion und den Vertrieb qualitativ hochwertiger Sachprodukte konzentrierten, werden kundenseitig zunehmend komplette Problemlösungen nachgefragt. Diese bestehen aus einem materiellen Sachproduktkern, der über seinen Lebenszyklus zielgerichtet durch verschiedene imaterielle Serviceprodukte ergänzt wird. Die Gestaltung und Realisierung der Problemlösungen, der sog. Produkt-Service Systeme (PSS), finden dabei in einem erweiterten Wertschöpfungsnetzwerk, bestehend aus den Produktions- und Servicenetzwerken des Herstellers in Zusammenarbeit mit dem Kunden, statt. Die Unternehmen sehen sich somit mittelfristig vor der Herausforderung den strategischen Wandel vom sachproduktorientierten Hersteller zu kundenorientierten Full-Service Providern zu vollziehen.In diesem Herausgeberband wird ein praxistaugliches Managementsystem zur Unterstützung von Planung, Entwicklung, Konfiguration und kundenindividueller Realisierung von PSS im erweiterten Wertschöpfungsnetzwerk bereitgestellt. Außerdem werden die dafür notwendigen Methoden zur Organisationsgestaltung sowie die zum Aufbau der erforderlichen Kompetenzen aufgezeigt. Die einzelnen Beiträge behandeln einerseits die theoretischen Grundlagen und Methoden zum Lebenszyklusmanagement von PSS, andererseits stellen sie Erfahrungsberichte von Unternehmen dar, welche das Konzept bereits in der Praxis anwenden.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Neue Geschäftsmodelle zu entwickeln und zu realisieren wird eine immer wichtigere Fähigkeit für Unternehmen unterschiedlicher Branchen. Bei verfügbarkeitsorientierten Geschäftsmodellen in der Investitionsgüterindustrie garantiert der Anbieter seinen Kunden eine definierte Verfügbarkeit des Investitionsguts. Der Kunde zahlt demnach nur noch für die Verfügbarkeit seiner Maschine. Neben einem adäquaten Ansatz zur Entwicklung verfügbarkeitsorientierter Geschäftsmodelle bilden innovative Sach- und Serviceprodukte, die auf intelligenter, kommunikationsfähiger Sensorik und einem durchgängigen, intelligenten Informationsmanagement basieren, die Grundlage zu deren Realisierung.Dieses Buch beschreibt die Ergebnisse des BMBF-Verbundforschungsprojekts 'Innovative Serviceprodukte für individualisierte, verfügbarkeitsorientierte Geschäftsmodelle für Investitionsgüter - InnoServPro'. InnoServPro hat das Ziel, verfügbarkeitsorientierte Geschäftsmodelle in der Investitionsgüterindustriezu realisieren. Die Erkenntnisse des Projektes werden dabei an drei Anwendungsfällen aus Landtechnik und Intralogistik demonstriert.