aggelis (23 Ergebnisse)

First Edition. First edition. Softcover. A collection of numerous interviews/conversations with Ray Bradbury edited by Steven L. Aggelis. A near fine copy in wrappers with some minor wear. Internally a clean copy.

Zustand: Very Good. First edition copy. . Uncorrected Proof. (Biography, Literary Criticism).

Zustand: New. pp. 49.

Zustand: Fine. 8vo., pp.xxxvi 208. Literary Conversations Series.

Zustand: very good. Le livre peut montrer des signes d'usure dus a une utilisation constante, etre marque, porter des marques d'identification ou presenter plusieurs dommages esthetiques mineurs. vendeur professionnel; envoi soigne en 24/48h.

Zustand: Used. pp. x + 197.

Hardcover. Zustand: Brand New. 200 pages. 10.39x7.17x0.71 inches. In Stock.

Zustand: New. Editor(s): Aggelis, George. Num Pages: 200 pages, tables & charts. BIC Classification: TDC; TH. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 181 x 265 x 19. Weight in Grams: 550. . 2009. Hardcover. . . . . Books ship from the US and Ireland.

Zustand: New. KlappentextrnrnThe present Special Issue intends to explore new directions in the field of acoustics and ultrasonics. The interest includes, but is not limited to, the use of acoustic technology for condition monitoring of materials and structur.

Zustand: New. pp. 752.

Buch. Zustand: Neu. Neuware - Glycerol is a simple carbon source than can be easy assimilated by numerous eukaryotic and prokaryotic microorganisms. However, this compound had been neglected as substrate for microbial fermentations for many years due mainly to its high cost. Nevertheless, recent developments in the fuel market, led to the production in large scale of biodiesel derived from vegetable oil, reversed this situation. Currently glycerol is available in large quantities in the biodiesel production units. This industry produces enormous quantities of glycerol as a by-product, during transesterification process of the oil with methanol or ethanol. Therefore, glycerol turns into an attractive feedstock. Biotechnology provides a broad range of methods for the valorisation of raw glycerol. Important commodities and high-added value products of industrial interest, such as organic acids, bioplastics, polyunsaturated fatty acids, carotenoids etc could be produced from raw glycerol. Glycerol can also be recycled after its conversion into microbial triacylglycerols and then to biodiesel. In this book, the biochemical pathways of glycerol metabolism in prokaryotic and eukaryotic cells cultivated under various conditions are discussed. The various methods, proposed so far in the international literature for the valorisation of glycerol by biotechnological means, are shown and discussed by using scientific and technological criteria. Evaluation of the economic viability of the 1,3-propanediol production processes is also presented. All chapters (research articles and reviews) were reviewed by experts. Although the examples presented are, doubtless, the more important, there are also a lot of other applications based on raw glycerol.

Buch. Zustand: Neu. Neuware - The present Special Issue intends to explore new directions in the field of acoustics and ultrasonics. The interest includes, but is not limited to, the use of acoustic technology for condition monitoring of materials and structures. Topics of interest (among others): Acoustic emission in materials and structures (without material limitation) Innovative cases of ultrasonic inspection Wave dispersion and waveguides Monitoring of innovative materials Seismic waves Vibrations, damping and noise control Combination of mechanical wave techniques with other types for structural health monitoring purposes. Experimental and numerical studies are welcome.

Zustand: New. In.

Zustand: Used: Like New. LIVRE A L?ETAT DE NEUF. EXPEDIE SOUS 3 JOURS OUVRES. NUMERO DE SUIVI COMMUNIQUE AVANT ENVOI, EMBALLAGE RENFORCE. EAN:9781611229202.

Taschenbuch. Zustand: Neu. Acoustic Emission Testing | Basics for Research - Applications in Engineering | Christian U. Grosse (u. a.) | Taschenbuch | Springer Tracts in Civil Engineering | x | Englisch | 2022 | Springer | EAN 9783030679385 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book provides an introduction to Acoustic Emission Testing and its applications to different materials like concrete, steel, ceramics, geotechnical materials, polymers, biological structures and wood. Acoustic Emission Techniques (AET) techniques have been studied in engineering for a long time. The techniques are applied more and more to practical investigations and are more and more standardized in codes. This is because the degradation of structures due to ageing urgently demand for maintenance and rehabilitation of structures in service. It results in the need for the development of advanced and efficient inspection techniques. In mechanical engineering and concerning the monitoring of machines and mechanical components, AE is a widely accepted observing deterioration in the frame of structural health monitoring. The advantages of AE like sensitivity, damage localization potential, non-intrusive nature as well as developments in signal analysis and data transmission allow applications that could not be considered decades ago.As such, AE techniques draw great attention to diagnostic applications and in material testing. This book covers all levels from the description of AE basics for AE beginners (level of a student) to sophisticated AE algorithms and applications to real large-scale structures as well as the observation of the cracking process in laboratory specimen to study fracture processes. This book has proved its worth over the past twelve years. Now in its second edition, it will be a resource that sets the standard and equips readers for the future. All chapters from the 1stedition have been updated and rewritten and eight extra chapters (e.g also regarding AE tomography, AE in plate-like structures and AE for investigations of hardening of fresh concrete) have been added.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 764 | Sprache: Englisch | Produktart: Bücher | This book provides an introduction to Acoustic Emission Testing and its applications to different materials like concrete, steel, ceramics, geotechnical materials, polymers, biological structures and wood. Acoustic Emission Techniques (AET) techniques have been studied in engineering for a long time. The techniques are applied more and more to practical investigations and are more and more standardized in codes. This is because the degradation of structures due to ageing urgently demand for maintenance and rehabilitation of structures in service. It results in the need for the development of advanced and efficient inspection techniques. In mechanical engineering and concerning the monitoring of machines and mechanical components, AE is a widely accepted observing deterioration in the frame of structural health monitoring. The advantages of AE like sensitivity, damage localization potential, non-intrusive nature as well as developments in signal analysis and data transmission allow applications that could not be considered decades ago.As such, AE techniques draw great attention to diagnostic applications and in material testing. This book covers all levels from the description of AE basics for AE beginners (level of a student) to sophisticated AE algorithms and applications to real large-scale structures as well as the observation of the cracking process in laboratory specimen to study fracture processes. This book has proved its worth over the past twelve years. Now in its second edition, it will be a resource that sets the standard and equips readers for the future. All chapters from the 1st edition have been updated and rewritten and eight extra chapters (e.g also regarding AE tomography, AE in plate-like structures and AE for investigations of hardening of fresh concrete) have been added.

Zustand: New. In.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book provides an introduction to Acoustic Emission Testing and its applications to different materials like concrete, steel, ceramics, geotechnical materials, polymers, biological structures and wood. Acoustic Emission Techniques (AET) techniques have been studied in engineering for a long time. The techniques are applied more and more to practical investigations and are more and more standardized in codes. This is because the degradation of structures due to ageing urgently demand for maintenance and rehabilitation of structures in service. It results in the need for the development of advanced and efficient inspection techniques. In mechanical engineering and concerning the monitoring of machines and mechanical components, AE is a widely accepted observing deterioration in the frame of structural health monitoring. The advantages of AE like sensitivity, damage localization potential, non-intrusive nature as well as developments in signal analysis and data transmission allow applications that could not be considered decades ago.As such, AE techniques draw great attention to diagnostic applications and in material testing. This book covers all levels from the description of AE basics for AE beginners (level of a student) to sophisticated AE algorithms and applications to real large-scale structures as well as the observation of the cracking process in laboratory specimen to study fracture processes. This book has proved its worth over the past twelve years. Now in its second edition, it will be a resource that sets the standard and equips readers for the future. All chapters from the 1stedition have been updated and rewritten and eight extra chapters (e.g also regarding AE tomography, AE in plate-like structures and AE for investigations of hardening of fresh concrete) have been added.

Gebunden. Zustand: New. Alkiviadis S. Paipetis, Theodore E. Matikas, Dimitrios G. Aggelis, Danny Van HemelrijckNon-destructive evaluation (NDE) methods have dominated most of the fields of applied research and technology over the last twenty years. These techniques provide .

Hardcover. Zustand: Brand New. 2nd edition. 762 pages. 9.25x6.10x9.21 inches. In Stock.

Zustand: Used: Like New. LIVRE A L?ETAT DE NEUF. EXPEDIE SOUS 3 JOURS OUVRES. NUMERO DE SUIVI COMMUNIQUE AVANT ENVOI, EMBALLAGE RENFORCE. EAN:9781606923924.

Buch. Zustand: Neu. Neuware - Non-destructive evaluation (NDE) methods have dominated most of the fields of applied research and technology over the last twenty years. These techniques provide information on the functional efficiency of materials and structures without causing any structural impact on the structure itself. Their use enables the monitoring of the structural integrity, the structural condition as well as the service in-duced degradation of materials and structures during their service life. In this respect, they address a vast field of applications ranging from the aerospace and automotive industry to civil engineering structures and material quality control. This volume comprises scientific papers presented during the Fifth Conference on Emerging Technologies in Non-Destructive Testing (Ioannina, Greece, 19-21 September 2011). A broad spectrum of related research was presented during the course of the conference, including optical, acoustic, thermal, electrical and electromagnetic methods together with imaging tomographic and signal processing techniques.Special attention was given to NDE for Civil Engineering Structures and for the first time in the conference series, a multiple session on NDE for the protection of cultural heritage was organized. Emerging Technologies in Non-Destructive Testing V contains contributions by experts in this field from 22 different countries worldwide. Reflecting the stateof-the-art in Non-Destructive Evaluation, the book will prove to be a valuable companion to students, engineers and industrial partners who are active in the field of non-destructive evaluation and testing. This volume will also provide students and researchers with insight into the focal points of contemporary research efforts in the field of non-destructive evaluation.