Produktart
Zustand
Einband
Weitere Eigenschaften
Land des Verkäufers
Verkäuferbewertung
Verlag: Hamburg : Hoffmann und Campe, 1997
ISBN 10: 3455297072ISBN 13: 9783455297072
Anbieter: Versandantiquariat Nussbaum, Bernkastel-Kues, RP, Deutschland
Buch
Softcover/Paperback. Zustand: Sehr gut. 128 S. : zahlr. Ill., Kt. ; 27 cm gutes Exemplar Sprache: Deutsch Gewicht in Gramm: 279.
Verlag: Springer Verlag, 1980
ISBN 10: 0387100385ISBN 13: 9780387100388
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Buch
Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,800grams, ISBN:0387100385.
Verlag: Springer Berlin Heidelberg, 2010
ISBN 10: 364208740XISBN 13: 9783642087400
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Buch
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Superplasticity is the ability of polycrystalline materials under certain conditions to exhibit extreme tensile elongation in a nearly homogeneous/isotropic manner. Historically, this phenomenon was discovered and systematically studied by metallurgists and physicists. They, along with practising engineers, used materials in the superplastic state for materials forming applications. Metallurgists concluded that they had the necessary information on superplasticity and so theoretical studies focussed mostly on understanding the physical and metallurgi cal properties of superplastic materials. Practical applications, in contrast, were led by empirical approaches, rules of thumb and creative design. It has become clear that mathematical models of superplastic deformation as well as analyses for metal working processes that exploit the superplastic state are not adequate. A systematic approach based on the methods of mechanics of solids is likely to prove useful in improving the situation. The present book aims at the following. 1. Outline briefly the techniques of mechanics of solids, particularly as it applies to strain rate sensitive materials. 2. Assess the present level of investigations on the mechanical behaviour of superplastics. 3. Formulate the main issues and challenges in mechanics ofsuperplasticity. 4. Analyse the mathematical models/constitutive equations for superplastic flow from the viewpoint of mechanics. 5. Review the models of superplastic metal working processes. 6. Indicate with examples new results that may be obtained using the methods of mechanics of solids.
Verlag: Springer Berlin Heidelberg, 2001
ISBN 10: 3540678425ISBN 13: 9783540678427
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Buch
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Superplasticity is the ability of polycrystalline materials under certain conditions to exhibit extreme tensile elongation in a nearly homogeneous/isotropic manner. Historically, this phenomenon was discovered and systematically studied by metallurgists and physicists. They, along with practising engineers, used materials in the superplastic state for materials forming applications. Metallurgists concluded that they had the necessary information on superplasticity and so theoretical studies focussed mostly on understanding the physical and metallurgi cal properties of superplastic materials. Practical applications, in contrast, were led by empirical approaches, rules of thumb and creative design. It has become clear that mathematical models of superplastic deformation as well as analyses for metal working processes that exploit the superplastic state are not adequate. A systematic approach based on the methods of mechanics of solids is likely to prove useful in improving the situation. The present book aims at the following. 1. Outline briefly the techniques of mechanics of solids, particularly as it applies to strain rate sensitive materials. 2. Assess the present level of investigations on the mechanical behaviour of superplastics. 3. Formulate the main issues and challenges in mechanics ofsuperplasticity. 4. Analyse the mathematical models/constitutive equations for superplastic flow from the viewpoint of mechanics. 5. Review the models of superplastic metal working processes. 6. Indicate with examples new results that may be obtained using the methods of mechanics of solids.
Verlag: Berlin, Springer., 2018
ISBN 10: 3642319564ISBN 13: 9783642319563
Anbieter: Antiquariat im Hufelandhaus GmbH vormals Lange & Springer, Berlin, Deutschland
Buch
XIX, 526 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Engineering Materials. Sprache: Englisch.
Mehr Angebote von anderen Verkäufern bei ZVAB
Neu ab EUR 196,60
Gebraucht ab EUR 21,00
Mehr entdecken Hardcover
Verlag: Springer, 2001
Anbieter: Anybook.com, Lincoln, Vereinigtes Königreich
Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,750grams, ISBN:9773540678428.
Verlag: Oxford University Press, 2017
ISBN 10: 019947608XISBN 13: 9780199476084
Anbieter: Monster Bookshop, Fleckney, Vereinigtes Königreich
Buch
Hardcover. Zustand: New. BRAND NEW ** SUPER FAST SHIPPING FROM UK WAREHOUSE ** 30 DAY MONEY BACK GUARANTEE.
Verlag: Berlin, Heidelberg, New York : Springer (Materials research and engineering ; Vol. 2), 1980
ISBN 10: 3540100385ISBN 13: 9783540100386
Anbieter: Antiquariat Smock, Freiburg, Deutschland
Buch Erstausgabe
Kunststoffeinband. XIV, 312 S.; 25 cm 1st edition; (With 86 figures); Exemplar aus Institutsbibliothek mit Standortschild am Rücken, Stempel u. kl. Barcodeklebern; Priv. mit Klarsichtfolie bezogen; sonst gut erhalten. Sprache: Englisch Gewicht in Gramm: 900.
Verlag: Berlin, Springer, 2001
Anbieter: Antiquariat Thomas Haker GmbH & Co. KG, Berlin, Deutschland
Verbandsmitglied: GIAQ
Buch
Hardcover. XIX, 363 S. : Ill. Like new. Shrink wrapped. Sprache: Englisch Gewicht in Gramm: 865.
Verlag: McGraw-Hill Education, 2021
ISBN 10: 1264266758ISBN 13: 9781264266753
Anbieter: Monster Bookshop, Fleckney, Vereinigtes Königreich
Buch
Paperback. Zustand: New. BRAND NEW ** SUPER FAST SHIPPING FROM UK WAREHOUSE ** 30 DAY MONEY BACK GUARANTEE.
Verlag: Springer Singapore, 2019
ISBN 10: 9811314764ISBN 13: 9789811314766
Anbieter: moluna, Greven, Deutschland
Buch
Gebunden. Zustand: New.
Verlag: Springer International Publishing 2019-12-09, Berlin, 2019
ISBN 10: 3319551302ISBN 13: 9783319551302
Anbieter: Blackwell's, London, Vereinigtes Königreich
Buch
hardback. Zustand: New. Language: ENG.
Verlag: McGraw-Hill Education, 2020
ISBN 10: 1264257635ISBN 13: 9781264257638
Anbieter: Monster Bookshop, Fleckney, Vereinigtes Königreich
Buch
Hardcover. Zustand: New. BRAND NEW ** SUPER FAST SHIPPING FROM UK WAREHOUSE ** 30 DAY MONEY BACK GUARANTEE.