Druck auf Anfrage Neuware - Printed after ordering - In the summer of 1981 I was asked to consider the possibility of manufacturing a 600,000 transistor microprocessor in 1985. It was clear that the technology would only be capable of manufacturing 100,000-200,000 transistor chips with acceptable yields. The control store ROM occupied approximately half of the chip area, so I considered adding spare rows and columns to increase ROM yield. Laser-programmed polysilicon fuses would be used to switch between good and bad circuits. Since only half the chip area would have redundancy, I was concerned that the increase in yield would not outweigh the increased costs of testing and redundancy programming. The fabrication technology did not yet exist, so I was unable to experimentally verify the benefits of redundancy. When the technology did become available, it would be too late in the development schedule to spend time running test chips. The yield analysis had to be done analytically or by simulation. Analytic yield analysis techniques did not offer sufficient accuracy for dealing with complex structures. The simulation techniques then available were very labor-intensive and seemed more suitable for redundant memories and other very regular structures [Stapper 80J. I wanted a simulator that would allow me to evaluate the yield of arbitrary redundant layouts, hence I termed such a simulator a layout or yield simulator. Since I was unable to convince anyone to build such a simulator for me, I embarked on the research myself.

Bestandsnummer des Verk�ufers 9780898382440

Verk�ufer kontaktieren

Diesen Artikel melden

Bibliografische Details

Titel: Yield Simulation for Integrated Circuits
Verlag: Springer US, Springer US
Ver�ffentlichungsdatum: 1987
Sprache: Englisch
ISBN-10: 0898382440
ISBN-13: 9780898382440
Bindung: Buch
Zustand: Neu

�ber diesen Titel

Inhaltsangabe

In the summer of 1981 I was asked to consider the possibility of manufacturing a 600,000 transistor microprocessor in 1985. It was clear that the technology would only be capable of manufacturing 100,000-200,000 transistor chips with acceptable yields. The control store ROM occupied approximately half of the chip area, so I considered adding spare rows and columns to increase ROM yield. Laser-programmed polysilicon fuses would be used to switch between good and bad circuits. Since only half the chip area would have redundancy, I was concerned that the increase in yield would not outweigh the increased costs of testing and redundancy programming. The fabrication technology did not yet exist, so I was unable to experimentally verify the benefits of redundancy. When the technology did become available, it would be too late in the development schedule to spend time running test chips. The yield analysis had to be done analytically or by simulation. Analytic yield analysis techniques did not offer sufficient accuracy for dealing with complex structures. The simulation techniques then available were very labor-intensive and seemed more suitable for redundant memories and other very regular structures [Stapper 80J. I wanted a simulator that would allow me to evaluate the yield of arbitrary redundant layouts, hence I termed such a simulator a layout or yield simulator. Since I was unable to convince anyone to build such a simulator for me, I embarked on the research myself.

Rese�a del editor

��ber diesen Titel� kann sich auf eine andere Ausgabe dieses Titels beziehen.

Anbieterinformationen

Das Unternehmen AHA-BUCH GmbH: Seit der Gr�ndung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisg�nstig wie m�glich ihren B�cherwunsch zu erf�llen. Unsere Firma besch�ftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine W�nsche! Auf �ber 3700 m2 Fl�che haben wir �ber 100.000 B�cher, Modernes Antiquariat und Spiele auf Lager.

Zur Homepage des Verk�ufers

Unternehmensdaten des Verk�ufers

AHA-BUCH GmbH
Garlebsen 48, Einbeck, 37574, Germany

Gesch�ftsbedingungen und Versandinformationen

Verkaufsbedingungen

Allgemeine Gesch�ftsbedingungen und Kundeninformationen / Datenschutzerkl�rung

I. Allgemeine Gesch�ftsbedingungen

� 1 Grundlegende Bestimmungen

(1) Die nachstehenden Gesch�ftsbedingungen gelten f�r alle Vertr�ge, die Sie mit uns als Anbieter (AHA-BUCH GmbH) �ber die Internetplattformen AbeBooks und/oder ZVAB schlie�en. Soweit nicht anders vereinbart, wird der Einbeziehung gegebenenfalls von Ihnen verwendeter eigener Bedingungen widersprochen.

(2) Verbraucher im Sinne der nachstehenden Regelungen...

Mehr Information

Versandbedingungen

Wir liefern Lagerartikel innerhalb von 24 Stunden nach Erhalt der Bestellung aus.
Barsortimentsartikel, die wir �ber Nacht geliefert bekommen, am darauffolgenden Werktag.
Unser Ziel ist es Ihnen die Artikel in der �konomischten und effizientesten Weise zu senden.

Impressum & Info zum Verk�ufer