Using ANSYS for Finite Element Analysis, Volume II

Wael A. Altabey|Mohammad Noori|Libin Wang

ISBN 10: 1947083228 ISBN 13: 9781947083226
Verlag: Momentum Press, 2018
Neu Softcover

Verkäufer moluna, Greven, Deutschland Verkäuferbewertung 5 von 5 Sternen 5 Sterne, Erfahren Sie mehr über Verkäufer-Bewertungen

AbeBooks-Verkäufer seit 9. Juli 2020


Beschreibung

Beschreibung:

Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. KlappentextrnrnOver the past two decades, the use of finite element method as a design tool has grown rapidly. Easy to use commercial software, such as ANSYS, have become common tools in the hands of students as well as practicing engineers. The. Bestandsnummer des Verkäufers 448452944

Diesen Artikel melden

Inhaltsangabe:

Over the past two decades, the use of finite element method as a design tool has grown rapidly. Easy to use commercial software, such as ANSYS, have become common tools in the hands of students as well as practicing engineers. The objective of this book is to demonstrate the use of one of the most commonly used Finite Element Analysis software, ANSYS, for linear static, dynamic, and thermal analysis through a series of tutorials and examples. Some of the topics covered in these tutorials include development of beam, frames, and Grid Equations; 2-D elasticity problems; dynamic analysis; composites, and heat transfer problems. These simple, yet, fundamental tutorials are expected to assist the users with the better understanding of finite element modeling, how to control modeling errors, and the use of the FEM in designing complex load bearing components and structures. These tutorials would supplement a course in basic finite element or can be used by practicing engineers who may not have the advanced training in finite element analysis.

Über die Autorin bzw. den Autor: Wael A. Altabey is an assistant professor in the department of mechanical engineering, faculty of engineering, Alexandria University, Alexandria, Egypt and has been a postdoctoral researcher at the International Institute for Urban Systems Engineering, Southeast University, Nanjing, China.

Mohammad Noori is a professor of mechanical engineering at California Polytechnic State University in San Luis Obispo, California, USA, and a fellow of the American Society of Mechanical Engineers. Dr Noori has over 34 years of experience as a scholar and educator. He has also been a distinguished visiting professor at the International Institute for Urban Systems Engineering, Southeast University, Nanjing, China.

Libin Wang is a professor and the dean of the school of civil engineering at Nanjing Forestry University, in Nanjing, China. He has been an educator and scholar, for over 20 years, and has taught the subject of finite element analysis both at the undergraduate and graduate level.

„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.

Bibliografische Details

Titel: Using ANSYS for Finite Element Analysis, ...
Verlag: Momentum Press
Erscheinungsdatum: 2018
Einband: Softcover
Zustand: New

Beste Suchergebnisse beim ZVAB

Foto des Verkäufers

Wael A. Altabey
Verlag: Momentum Press Jun 2018, 2018
ISBN 10: 1947083228 ISBN 13: 9781947083226
Neu Taschenbuch

Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland

Verkäuferbewertung 5 von 5 Sternen 5 Sterne, Erfahren Sie mehr über Verkäufer-Bewertungen

Taschenbuch. Zustand: Neu. Neuware -Over the past two decades, the use of finite element method as a design tool has grown rapidly. Easy to use commercial software, such as ANSYS, have become common tools in the hands of students as well as practicing engineers. The objective of this book is to demonstrate the use of one of the most commonly used Finite Element Analysis software, ANSYS, for linear static, dynamic, and thermal analysis through a series of tutorials and examples. Some of the topics covered in these tutorials include development of beam, frames, and Grid Equations; 2-D elasticity problems; dynamic analysis; composites, and heat transfer problems. These simple, yet, fundamental tutorials are expected to assist the users with the better understanding of finite element modeling, how to control modeling errors, and the use of the FEM in designing complex load bearing components and structures. These tutorials would supplement a course in basic finite element or can be used by practicing engineers who may not have the advanced training in finite element analysis.Libri GmbH, Europaallee 1, 36244 Bad Hersfeld 240 pp. Englisch. Artikel-Nr. 9781947083226

Verkäufer kontaktieren

Neu kaufen

EUR 47,50
Währung umrechnen
Versand: Gratis
Innerhalb Deutschlands
Versandziele, Kosten & Dauer

Anzahl: 2 verfügbar

In den Warenkorb

Beispielbild für diese ISBN

Altabey, Wael A.
Verlag: Momentum Pr, 2018
ISBN 10: 1947083228 ISBN 13: 9781947083226
Neu Paperback

Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich

Verkäuferbewertung 5 von 5 Sternen 5 Sterne, Erfahren Sie mehr über Verkäufer-Bewertungen

Paperback. Zustand: Brand New. 150 pages. 9.00x6.00x0.59 inches. In Stock. Artikel-Nr. x-1947083228

Verkäufer kontaktieren

Neu kaufen

EUR 49,05
Währung umrechnen
Versand: EUR 11,79
Von Vereinigtes Königreich nach Deutschland
Versandziele, Kosten & Dauer

Anzahl: 2 verfügbar

In den Warenkorb