Process Control for Sheet-Metal Stamping Process Modeling, Controller Design and Shop-Floor Implementation

Sprache: Englisch

Verlag: Springer, 2014

1447162838 / 9781447162834

Serie: Buch 104 von 167 - Advances in Industrial Control

Anbieter: Home-set, Mannheim, DeutschlandHome-set

Verkäufer/-in mit 5 Sternen

Verkäufer:in bei ZVAB seit 13. April 2026

Hardcover

Zustand: Neu

EUR 133,74

EUR 49,90 Versand 
Versand von Deutschland nach USA

Anzahl: 2 verfügbar

In den Warenkorb
30 Tage kostenlose Rückgabe

Artikelbeschreibung des Verkäufers

Process Control for Sheet-Metal Stamping presents a comprehensive and structured approach to the design and implementation of controllers for the sheet metal stamping process. The use of process control for sheet-metal stamping greatly reduces defects in deep-drawn parts and can also yield large material savings from reduced scrap. Sheet-metal forming is a complex process and most often characterized by partial differential equations that are numerically solved using finite-element techniques. In this book, twenty years of academic research are reviewed and the resulting technology transitioned to the industrial environment. The sheet-metal stamping process is modeled in a manner suitable for multiple-input multiple-output control system design, with commercially available sensors and actuators. These models are then used to design adaptive controllers and real-time controller implementation is discussed. Finally, experimental results from actual shop floor deployment are presented along with ideas for further improvement of the technology. Process Control for Sheet-Metal Stamping allows the reader to design and implement process controllers in a typical manufacturing environment by retrofitting standard hydraulic or mechanical stamping presses and as such will be of interest to practising engineers working in metal-working, automotive and aeronautical industries. Academic researchers studying improvements in process control and how these affect the industries in which they are applied will also find the text of value. Sprache: Englisch Gewicht in Gramm: 349.…

Titel
Process Control for Sheet-Metal Stamping Process Modeling, Controller Design and Shop-Floor Implementation
Autor
A Galip Ulsoy, Yongseob Lim, Ravinder Venugopal
Verlag
Springer
Erscheinungsjahr
2014
Zustand
Neu
Einband
Gebundene Ausgabe
Sprache
Englisch
ISBN-10
1447162838
ISBN-13
9781447162834
Artikelgewicht
349 Gramm
Serie
Buch 104 von 167: Advances in Industrial Control

Home-set

Mannheim, Deutschland

Verkäufer/-in mit 5 Sternen

Verkäufer:in bei ZVAB seit 13. April 2026

Versandkosten von Deutschland nach USA

Artikel10 bis 12 Werktage8 bis 10 Werktage
Erster ArtikelEUR 49,90EUR 75,00
Die Versandzeiten werden von den Verkäuferinnen und Verkäufern festgelegt. Sie variieren je nach Versanddienstleister und Standort. Sendungen, die den Zoll passieren, können Verzögerungen unterliegen. Eventuell anfallende Abgaben oder Gebühren sind von der Käuferin bzw. dem Käufer zu tragen. Die Verkäuferin bzw. der Verkäufer kann Sie bezüglich zusätzlicher Versandkosten kontaktieren, um einen möglichen Anstieg der Versandkosten für Ihre Artikel auszugleichen.

Zahlungsarten

  • Visa
  • Mastercard
  • American Express
  • Carte Bleue
  • Apple Pay
  • Google Pay
  • Vorauskasse

Spezialisierung

Buch