Inhaltsangabe
PRINT READING FOR ARCHITECTURE AND CONSTRUCTION TECHNOLOGY, 3E provides the knowledge and skills needed to accurately interpret blueprints for residential and light commercial construction. This easy-to-use text explores all facets of print reading, with examples and illustrations taken from actual architectural prints. Readers are provided with the information they need to create high-quality, standardized "real world" working drawings. In addition, this edition is fully updated with CADD-generated print reading examples, illustrations, and exercises that comply with the highest industry standards of computer-aided design and drafting.
Über die Autorin bzw. den Autor
A prolific author and respected instructor, Alan Jefferis has taught drafting technology at Clackamas Community College, an Authorized AutoCAD (R) Training Center, for more than 31 years. Prior to that, Mr. Jefferis taught for four years at Mt. Hood Community College in Gresham, Oregon. He brings a wealth of professional experience to his writing, including eight years of drafting for structural engineers and 35 years of residential designing. Mr. Jefferis is currently the principal owner of Residential Designs, a design firm specializing in custom, energy-efficient homes. He is a former Autodesk (R) Developer Network member and a former member of the A.I.B.D. Mr. Jefferis obtained his B.S. degree from San Diego State University in 1972 and has authored or co-authored numerous textbooks on architectural drafting and design and effectively working with AutoCAD. Tereasa has worked as an architectural designer and HVAC specialist for over 10 years. She is currently teaching architectural design and CADD classes at Mt Hood Community College. She has served as a contributing author for the text AutoCAD for Architecture, Architectural Drafting and Design and Residential Design, Drafting and Detailing. David A. Madsen is an emeritus faculty member in drafting technology and the Autodesk Premier Training Center at Clackamas Community College in Oregon City, Oregon, where he also served as an instructor and department chairperson for nearly 30 years. In addition to his community college experience, David served as a drafting technology instructor at Centennial High School in Gresham, Oregon. He is a former member of the American Design and Drafting Association (ADDA) Board of Directors and was honored by the ADDA with Director Emeritus status at the annual conference in 2005. David is an Autodesk Authorized Author and has extensive experience in mechanical drafting, architectural design and drafting, and building construction. He holds a master of education degree in vocational administration and a bachelor of science degree in industrial education. He is the author of ENGINEERING DRAWING AND DESIGN, GEOMETRIC DIMENSIONING AND TOLERANCING, and PRINT READING FOR ENGINEERING AND MANUFACTURING TECHNOLOGY, and coauthor of ARCHITECTURAL AUTOCAD; ARCHITECTURAL DESKTOP AND ITS APPLICATIONS; ARCHITECTURAL DRAFTING AND DESIGN; ARCHITECTURAL DRAFTING USING AUTOCAD; AUTOCAD AND ITS APPLICATIONS: BASICS, ADVANCED, AND COMPREHENSIVE; AUTOCAD ARCHITECTURE AND ITS APPLICATIONS; AUTOCAD ESSENTIALS; CIVIL DRAFTING TECHNOLOGY; and PRINT READING FOR ARCHITECTURE AND CONSTRUCTION TECHNOLOGY. David P. Madsen is president of Engineering Drafting & Design, Inc., and vice president of Madsen Designs Inc. Dave provides drafting and design consultation and training for all disciplines and is an Autodesk Authorized Author. He has been a professional design drafter since 1996 and has extensive experience in a variety of drafting, design, and engineering disciplines. Dave has provided drafting and computer-aided design and drafting instruction to secondary and postsecondary learners since 1999, and he has considerable curriculum and program coordination and development experience. Dave holds a master of science degree in educational policy, foundations, and administrative studies, with a specialization in postsecondary, adult, and continuing education. He also holds a bachelor of science degree in technology education and an associate of science degree in general studies and drafting technology. Dave is the author of INVENTOR AND ITS APPLICATIONS and coauthor of ARCHITECTURAL DRAFTING AND DESIGN, ARCHITECTURAL DRAFTING USING AUTOCAD, AUTOCAD AND ITS APPLICATIONS: BASICS AND COMPREHENSIVE, CIVIL DRAFTING TECHNOLOGY, ENGINEERING DRAWING AND DESIGN, GEOMETRIC DIMENSIONING AND TOLERANCING, PRINT READING FOR ARCHITECTURE AND CONSTRUCTION TECHNOLOGY, and PRINT READING FOR ENGINEERING AND MANUFACTURING TECHNOLOGY. David A. Madsen is an emeritus faculty member in drafting technology and the Autodesk Premier Training Center at Clackamas Community College in Oregon City, Oregon, where he also served as an instructor and department chairperson for nearly 30 years. In addition to his community college experience, David served as a drafting technology instructor at Centennial High School in Gresham, Oregon. He is a former member of the American Design and Drafting Association (ADDA) Board of Directors and was honored by the ADDA with Director Emeritus status at the annual conference in 2005. David is an Autodesk Authorized Author and has extensive experience in mechanical drafting, architectural design and drafting, and building construction. He holds a master of education degree in vocational administration and a bachelor of science degree in industrial education. He is the author of ENGINEERING DRAWING AND DESIGN, GEOMETRIC DIMENSIONING AND TOLERANCING, and PRINT READING FOR ENGINEERING AND MANUFACTURING TECHNOLOGY, and coauthor of ARCHITECTURAL AUTOCAD; ARCHITECTURAL DESKTOP AND ITS APPLICATIONS; ARCHITECTURAL DRAFTING AND DESIGN; ARCHITECTURAL DRAFTING USING AUTOCAD; AUTOCAD AND ITS APPLICATIONS: BASICS, ADVANCED, AND COMPREHENSIVE; AUTOCAD ARCHITECTURE AND ITS APPLICATIONS; AUTOCAD ESSENTIALS; CIVIL DRAFTING TECHNOLOGY; and PRINT READING FOR ARCHITECTURE AND CONSTRUCTION TECHNOLOGY.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
