Pocket Decomposition using DN and HARI Number. A Novel Approach

Sprache: Englisch

Verlag: GRIN Verlag, 2018

3668659206 / 9783668659209

Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH

Verkäufer/-in mit 5 Sternen

AbeBooks-Verkäufer/-in seit 14. August 2006

Artikel dieses Verkäufers ansehen
Softcover

Zustand: Neu

EUR 52,95

EUR 61,60 Versand 
Versand von Deutschland nach USA

Anzahl: 1 verfügbar

In den Warenkorb
Kostenlose Rückgaben innerhalb von 30 Tagen

Artikelbeschreibung vom Verkäufer

Druck auf Anfrage Neuware - Printed after ordering - Doctoral Thesis / Dissertation from the year 2016 in the subject Engineering - Mechanical Engineering, grade: Distinction, Sardar Vallabhbhai National Institute of Technology, language: English, abstract: A 2.5D pocket milling is extensively used in aerospace, shipyard, automobile, dies and molds industries. In machining of 2.5D pockets, directional parallel tool-path and contour parallel tool-path are widely used. However, these tool paths significantly limit the machining efficiency. In the present work, an attempt has been made to generate a spiral tool path for machining of 2.5D star-shaped pocket for improving machining efficiency. The spiral tool path is developed using second order elliptic partial differential equation (PDE) and it is free from sharp corners inside the pocket region. Further, the implementation of proposed method is presented on complex non-star-shaped polygon, pocket bounded by free-form curve and pocket with island.The shape of pocket geometry, tool path strategy and various machining parameters (speed, feed rate and depth of cut) affect machining performance. However, the effect of the shape of a pocket geometry and tool path strategy on the performance of pocket machining is scarcely reported. Hence, an attempt has been made to investigate the effect of aspect ratio, feed rate and tool path strategies (zig-zag, spiral and contour parallel) on tool path length, cutting time, percentage utilization of a tool and average surface roughness in machining of AISI 304 stainless steel using design of experiments (DOE).From the findings of above experimental investigation, it was anticipated that there is a need to develop a method (or technique) for comparing different pocket geometry quantitatively and predict the effect of pocket geometry on pocket machining. A novel approach is reported for quantitative comparison of different pocket geometries using a dimensionless number, Divyang Number (DN). The concept and formula of DN are developed and DN is calculated for various pocket geometries. The guidelines for comparing pocket geometries based on DN and PUT (percentage utilization of tool) are reported. The results show that DN can be used to predict the quality of tool path prior to tool path generation. Further, an algorithm to decompose pocket geometry (parent geometry) into sub-geometries is developed that improves the efficiency of spiral tool path for bottle-neck pockets using HARI Number. The results indicate that decomposing pocket geometry with the new algorithm improves HARIN and removes the effect of bottle-necks. Furthermore, the algorithm for decomposition is extended for pockets that are bounded by free-form curves.

Bestandsnummer des Verkäufers 9783668659209

Titel
Pocket Decomposition using DN and HARI Number. A Novel Approach
Autor
Devdas I. Lalwani
Verlag
GRIN Verlag
Veröffentlichungsjahr
2018
Zustand
Neu
Einband
Taschenbuch
Sprache
Englisch
ISBN-10
3668659206
ISBN-13
9783668659209
Artikelgewicht
320 Gramm
Abmessungen
210x148x16 mm

AHA-BUCH GmbH

Einbeck, Deutschland

Verkäufer/-in mit 5 Sternen

AbeBooks-Verkäufer/-in seit 14. August 2006

Versandkosten von Deutschland nach USA

Artikel30 bis 40 Werktage7 bis 14 Werktage
Erster ArtikelEUR 61,60EUR 71,60
Die Versandzeiten werden von den Verkäuferinnen und Verkäufern festgelegt. Sie variieren je nach Versanddienstleister und Standort. Sendungen, die den Zoll passieren, können Verzögerungen unterliegen. Eventuell anfallende Abgaben oder Gebühren sind von der Käuferin bzw. dem Käufer zu tragen. Die Verkäuferin bzw. der Verkäufer kann Sie bezüglich zusätzlicher Versandkosten kontaktieren, um einen möglichen Anstieg der Versandkosten für Ihre Artikel auszugleichen.

Zahlungsarten

  • Visa
  • Mastercard
  • American Express
  • Carte Bleue
  • Apple Pay
  • Google Pay
  • Banküberweisung
  • PayPal
  • Vorauskasse

Shop-Beschreibung

Das Unternehmen AHA-BUCH GmbH: Seit der Gründung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisgünstig wie möglich ihren Bücherwunsch zu erfüllen. Unsere Firma beschäftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine Wünsche! Auf über 3700 m2 Fläche haben wir über 100.000 Bücher, Modernes Antiquariat und Spiele auf Lager.

Spezialisierung

Kinderbücher & Kinderhör Casetten, German Books, Software, Natur & Tiere, Ratgeber, Sachbücher, Englische Bücher, Medizin & Gesundheit, Universität & Studium

Unternehmensdaten der Verkäuferin bzw. des Verkäufers

AHA-BUCH GmbH

Garlebsen 48
Einbeck, Deutschland 37574