Inhaltsangabe
Excerpt from A Manual of the Mechanics of Engineering and of the Construction of Machines, Vol. 2 of 3: Designed as a Text-Book for Technical Schools and Colleges, and for the Use of Engineers, Architects, Etc.; Section II. Application of Mechanics to Machines; Part II. Heat, Steam, and Steam Engines
After the completion of his own labors, the work appeared somewhat in complete in those directions relating to the application of the steam-engine where recent progress has been very considerable, and the translator has therefore associated with himself Mr. Richard H. Buel, c.e., who has made many additions to the book with especial reference to American practice, and will also take part in the appendix above referred to. Mr. Buel's anno tations are distinguished from the body of the work by being, in every case, in fine print and enclosed in brackets. With reference to these,it is but proper to state, that, having commenced their preparation immediately after completing the revision of a number of articles on mechanical engineering for Appleton's Cyclopaedia of Applied Mechanics (which work is now in course of publication by D. Appleton there is naturally much simi larity between the present notes and some portions of the annotations referred to, both being compiled, in general, from the same sources of information.
About the Publisher
Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com
This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Reseña del editor
Excerpt from A Manual of the Mechanics of Engineering and of the Construction of Machines, Vol. 2 of 3: Designed as a Text-Book for Technical Schools and Colleges, and for the Use of Engineers, Architects, Etc.; Section II. Application of Mechanics to Machines; Part II. Heat, Steam, and Steam Engines
After the completion of his own labors, the work appeared somewhat in complete in those directions relating to the application of the steam-engine where recent progress has been very considerable, and the translator has therefore associated with himself Mr. Richard H. Buel, c.e., who has made many additions to the book with especial reference to American practice, and will also take part in the appendix above referred to. Mr. Buel's anno tations are distinguished from the body of the work by being, in every case, in fine print and enclosed in brackets. With reference to these,it is but proper to state, that, having commenced their preparation immediately after completing the revision of a number of articles on mechanical engineering for Appleton's Cyclopaedia of Applied Mechanics (which work is now in course of publication by D. Appleton there is naturally much simi larity between the present notes and some portions of the annotations referred to, both being compiled, in general, from the same sources of information.
About the Publisher
Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com
This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
