Neuware -This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This possibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers.The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology.Contents:. Introduction. Tool Steels and Their Coatability. Fundamentals of Coating Technologies. Measurement Technology for Coating Characterization. Application of Functional CoatingsHanser Fachbuchverlag, Kolberger Str. 22, 81679 M�nchen 346 pp. Englisch.

Bestandsnummer des Verk�ufers 9781569902660

Verk�ufer kontaktieren

Diesen Artikel melden

Bibliografische Details

Titel: Injection Mold Coating Technology
Verlag: Hanser Fachbuchverlag Jul 2024
Ver�ffentlichungsdatum: 2024
Sprache: Englisch
ISBN-10: 1569902666
ISBN-13: 9781569902660
Bindung: Buch
Zustand: Neu

�ber diesen Titel

Inhaltsangabe

This book closes a fundamental gap in the field of mold design. The use of injection molding coatings extends the technical possibilities in the field of plastics production, such as the achievable flow path length, the use of abrasive and corrosive plastics, and the achievable tool life. This possibility of functionalization has so far been somewhat neglected due to a lack of available information on the state of the art and possible applications. This book therefore brings together the available knowledge of various experts in a way that is understandable for engineering students and tool and mold makers. The book covers the individual steps of coating technologies. First, the steel materials that are mainly used for the construction of tools in plastics processing are presented. This is followed by the current status of the various coating technologies. The existing coating technologies are presented and characterized with regard to their suitability for use in tool technology in the plastics processing environment. The third part deals with the characterization of the deposited coatings. On the one hand, the focus is on the characterization of the actual coating, such as chemical composition, coating layout and coating thickness. Secondly, the measurement methods for determining the functional properties of the deposited coatings, such as hardness and wear resistance, thermal properties, thermal conductivity and tribological properties, are presented. Finally, the use of appropriate coatings is illustrated using practical examples from plastics technology.

�ber die Autorin bzw. den Autor

Dr. Ruben Schlutter works at the Kunststoff-Institut f�r die mittelst�ndische Wirtschaft NRW GmbH in L�denscheid, Germany, in the field of tool coating technologies and surface functionalization by biocidal nanoparticles. From 2020 to January 2022, he was division manager for new materials and tool technology at the non-profit KIMW-Forschungs-GmbH. Since 2022 he has been working as an independent lecturer.

��ber diesen Titel� kann sich auf eine andere Ausgabe dieses Titels beziehen.

Anbieterinformationen

Impressum Thorsten Retsch Buchversand Mimpf2000 Ober�lschnitz 16 95517 Emtmannsberg Deutschland Telefon: 09209-2023188 Email: mimpf2000@online.de USt-ID-Nr.: DE 235096871 Wir f�hren gebrauchte B�cher aus allen Sparten der Literatur

Zur Homepage des Verk�ufers

Unternehmensdaten des Verk�ufers

buchversandmimpf2000
Germany

Gesch�ftsbedingungen und Versandinformationen

Verkaufsbedingungen

Widerrufsbelehrung/ Muster-Widerrufsformular/
Allgemeine Gesch�ftsbedingungen und Kundeninformationen/ Datenschutzerkl�rung

Widerrufsrecht f�r Verbraucher
(Verbraucher ist jede nat�rliche Person, die ein Rechtsgesch�ft zu Zwecken abschlie�t, die �berwiegend weder ihrer gewerblichen noch ihrer selbstst�ndigen beruflichen T�tigkeit zugerechnet werden kann.)

Widerrufsbelehrung

Widerrufsrecht
Sie haben das Recht, binnen vierzehn Tagen ohne Angabe von Gr�nden diesen Vertrag zu widerrufen.
Die Widerru...

Mehr Information

Versandbedingungen

Soweit in der Artikelbeschreibung keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Werktagen nach Vertragsschluss, bei Vorauszahlung erst nach Eingang des vollst�ndigen Kaufpreises und der Versandkosten. Alle Preise inkl. MwSt.

Impressum & Info zum Verk�ufer