Neuware -The process of heating and reshaping plastics sheet and film materials has been in use since the beginning of the plastics industry. This process is known as thermoforming. Today this process is used for industrial products including signage, housings, and hot tubs. It also produces much of the packaging in use today including blister packs, egg cartons, and food storage containers. This process has many advantages over other methods of producing these products, but it has some limitations. This book has a twofold purpose. It is designed to be used as a text book for a course on thermoforming. It is also intended to be an application guide for professionals in the field of thermoforming including manufacturing, process and quality engineers, and managers. This book is focused on process application rather than theory. It refers to real products and processes with the intent of understanding the real issues faced in this industry. In addition to materials and processes, part and tool design are covered. Quality control is critical to any operation and this is also covered in this text. Two areas of focus in today's industry include Lean operations and environmental issues. Both of these topics are also included. Table of Contents: Introduction / Plastics Materials / Thermoforming Process Overview / The Forming Process / Part Design Mold / Tool Design / Quality Control Issues / Lean Operations / Environmental IssuesSpringer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 100 pp. Englisch.

Bestandsnummer des Verk�ufers 9783031012648

Verk�ufer kontaktieren

Diesen Artikel melden

Bibliografische Details

Titel: Fundamentals of Plastics Thermoforming
Verlag: Springer International Publishing, Springer International Publishing Apr 2009
Erscheinungsjahr: 2009
Sprache: Englisch
ISBN-10: 303101264X
ISBN-13: 9783031012648
Einband: Taschenbuch
Zustand: Neu
Abmessungen: Breite: 235 mm, H�he: 191 mm, Tiefe: 6 mm
Gewicht: 205 Gramm

�ber diesen Titel

Inhaltsangabe

The process of heating and reshaping plastics sheet and film materials has been in use since the beginning of the plastics industry. This process is known as thermoforming. Today this process is used for industrial products including signage, housings, and hot tubs. It also produces much of the packaging in use today including blister packs, egg cartons, and food storage containers. This process has many advantages over other methods of producing these products, but it has some limitations. This book has a twofold purpose. It is designed to be used as a text book for a course on thermoforming. It is also intended to be an application guide for professionals in the field of thermoforming including manufacturing, process and quality engineers, and managers. This book is focused on process application rather than theory. It refers to real products and processes with the intent of understanding the real issues faced in this industry. In addition to materials and processes, part and tool design are covered. Quality control is critical to any operation and this is also covered in this text. Two areas of focus in today's industry include Lean operations and environmental issues. Both of these topics are also included. Table of Contents: Introduction / Plastics Materials / Thermoforming Process Overview / The Forming Process / Part Design Mold / Tool Design / Quality Control Issues / Lean Operations / Environmental Issues

�ber die Autorin bzw. den Autor

Dr. Peter W. Klein is Chair of the Department of Industrial Technology in the Russ College of Engineering & Technology at Ohio University in Athens, Ohio. He has been a faculty member since 1990 and has been responsible for the development and teaching of a variety of courses including: Industrial Plastics, Plastics Forming & Fabrication, Plastics Molding Processes, Quality Assurance, Introduction to Manufacturing, Introduction to Manufacturing Processes, and Product Manufacturing. He has also taught Operations Management for the College of Business at the undergraduate, graduate, executive MBA, and international MBA levels. Prior to joining the faculty at Ohio University he held various management positions in the manufacturing operations areas within Hewlett Packard, IBM, and AMPEX corporations. He began developing and teaching classes in plastics processing in 1975 at Colorado State University. He has authored numerous publications in the areas of plastics processing, operations management, and quality assurance. He regularly makes presentations on these topics at national and international conferences. He is a member of the Society of Plastics Engineers, Association of Rotational Molders International, American Society of Engineering Educators, and the National Association of Industrial Technology.

��ber diesen Titel� kann sich auf eine andere Ausgabe dieses Titels beziehen.

Anbieterinformationen

Impressum Thorsten Retsch Buchversand Mimpf2000 Ober�lschnitz 16 95517 Emtmannsberg Deutschland Telefon: 09209-2023188 Email: mimpf2000@online.de USt-ID-Nr.: DE 235096871 Wir f�hren gebrauchte B�cher aus allen Sparten der Literatur

Zur Homepage des Verk�ufers

Unternehmensdaten des Verk�ufers

buchversandmimpf2000
Germany

Gesch�ftsbedingungen und Versandinformationen

Verkaufsbedingungen

Widerrufsbelehrung/ Muster-Widerrufsformular/
Allgemeine Gesch�ftsbedingungen und Kundeninformationen/ Datenschutzerkl�rung

Widerrufsrecht f�r Verbraucher
(Verbraucher ist jede nat�rliche Person, die ein Rechtsgesch�ft zu Zwecken abschlie�t, die �berwiegend weder ihrer gewerblichen noch ihrer selbstst�ndigen beruflichen T�tigkeit zugerechnet werden k�nnen.)

Widerrufsbelehrung

Widerrufsrecht
Sie haben das Recht, binnen 14 Tagen ohne Angabe von Gr�nden diesen Vertrag zu widerrufen.
Die Widerrufsfr...

Mehr Information

Widerrufsbelehrung

Versandbedingungen

Soweit in der Artikelbeschreibung keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Werktagen nach Vertragsschluss, bei Vorauszahlung erst nach Eingang des vollst�ndigen Kaufpreises und der Versandkosten. Alle Preise inkl. MwSt.

Versandkosten von Deutschland nach USA

Versandkosten von Deutschland nach USA
Bestellmenge	60 bis 60�Werktage	60 bis 60�Werktage
Erster Artikel	EUR 60.00	EUR 75.00

Die Versandzeiten werden von den Verk�uferinnen und Verk�ufern festgelegt. Sie variieren je nach Versanddienstleister und Standort. Sendungen, die den Zoll passieren, k�nnen Verz�gerungen unterliegen. Eventuell anfallende Abgaben oder Geb�hren sind von der K�uferin bzw. dem K�ufer zu tragen. Die Verk�uferin bzw. der Verk�ufer kann Sie bez�glich zus�tzlicher Versandkosten kontaktieren, um einen m�glichen Anstieg der Versandkosten f�r Ihre Artikel auszugleichen.

Impressum & Info zum Verk�ufer