Choosing & Using the Right Milling Machine

Sprache: Englisch

Verlag: Industrial Press Sep 2022, 2022

0831136847 / 9780831136840

Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH

Verkäufer/-in mit 5 Sternen

AbeBooks-Verkäufer/-in seit 14. August 2006

Artikel dieses Verkäufers ansehen
Softcover

Zustand: Neu

EUR 74,06

EUR 30,50 Versand 
Versand von Deutschland nach USA

Anzahl: 1 verfügbar

In den Warenkorb
Kostenlose Rückgaben innerhalb von 30 Tagen

Artikelbeschreibung vom Verkäufer

Neuware - In most modern metal shops, you’ll find both a lathe and a vertical mill. Both machines function by removing material from a block of metal—the "workpiece." The key difference between the two is how the workpiece is handled. On a lathe, the workpiece rotates, and is cut away by a knife tool. (Typical products of lathe work are "turned parts" such as spindles, bearings, screws, washers, and circular blanks for gears.)On a milling machine, it’s the cutter that rotates. The workpiece is clamped to a table that is moved by precise amounts in two axes at right angles. (Typical mill products are flat-surfaced blocks of metal, like a cube, sometimes drilled for spindles or dowel pins, often tapped for screws.)Both the lathe and mill are incredibly flexible machines, but neither is capable of doing useful work right "out of the box." Both call for a number of accessories for holding the workpiece, as well as a selection of different cutting tools, drills, reamers, etc. Unlike lathe turning, which has not changed fundamentally in the past 100 years, milling in the small shop has been changed radically by the recent introduction of bench-top machines.There are now so many different milling machines that insider information has become even more important. In this work, Choosing & Using the Right Milling Machine, Richard Rex provides everything needed to choose the right type of mill—knee-type (Bridgeport) or bench-top—and properly install it depending on the type of work you’re doing. With suggestions for finding, installing, and using the essential accessories, including digital readouts, this work is a must-have for model shops around the globe. And it’s the perfect companion work to Choosing & Using the Right Metal Shop Lathe.Features- Covers different types of milling cutters, including end mills, drill bits, reamers, and slitting saws.- Introduces information on the add-ons that get a shop operational with the least delay and expense.- Instructs on the installation and use of three popular accessories—table power-feed, digital readout (DRO), and rotary table.Provides a workpiece tutorial that demonstrates many of the commonplace milling routines—ideal for first-time users.

Bestandsnummer des Verkäufers 9780831136840

Titel
Choosing & Using the Right Milling Machine
Autor
Richard Rex
Verlag
Industrial Press Sep 2022
Veröffentlichungsjahr
2022
Zustand
Neu
Einband
Taschenbuch
Sprache
Englisch
ISBN-10
0831136847
ISBN-13
9780831136840
Artikelgewicht
544 Gramm
Abmessungen
226x152x18 mm

AHA-BUCH GmbH

Einbeck, Deutschland

Verkäufer/-in mit 5 Sternen

AbeBooks-Verkäufer/-in seit 14. August 2006

Versandkosten von Deutschland nach USA

Artikel5 bis 7 Werktage7 bis 10 Werktage
Erster ArtikelEUR 30,50EUR 30,50
Die Versandzeiten werden von den Verkäuferinnen und Verkäufern festgelegt. Sie variieren je nach Versanddienstleister und Standort. Sendungen, die den Zoll passieren, können Verzögerungen unterliegen. Eventuell anfallende Abgaben oder Gebühren sind von der Käuferin bzw. dem Käufer zu tragen. Die Verkäuferin bzw. der Verkäufer kann Sie bezüglich zusätzlicher Versandkosten kontaktieren, um einen möglichen Anstieg der Versandkosten für Ihre Artikel auszugleichen.

Zahlungsarten

  • Visa
  • Mastercard
  • American Express
  • Carte Bleue
  • Apple Pay
  • Google Pay
  • Banküberweisung
  • PayPal
  • Vorauskasse

Shop-Beschreibung

Das Unternehmen AHA-BUCH GmbH: Seit der Gründung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisgünstig wie möglich ihren Bücherwunsch zu erfüllen. Unsere Firma beschäftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine Wünsche! Auf über 3700 m2 Fläche haben wir über 100.000 Bücher, Modernes Antiquariat und Spiele auf Lager.

Spezialisierung

Kinderbücher & Kinderhör Casetten, German Books, Software, Natur & Tiere, Ratgeber, Sachbücher, Englische Bücher, Medizin & Gesundheit, Universität & Studium

Unternehmensdaten der Verkäuferin bzw. des Verkäufers

AHA-BUCH GmbH

Garlebsen 48
Einbeck, Deutschland 37574