Neuware -This book is intended for scientists and engineers in the field of micro- and nano electro-mechanical systems (MEMS and NEMS) and introduces the development of cantilever-based sensor systems using CMOS-compatible micromachining from the design concepts and simulations to the prototype. It is also a useful resource for researchers on cantilever sensors and resonant sensors in general The reader will become familiar with the potential of the combination of two technological approaches: IC fabrication technology, notably CMOS technology, and silicon micromachining and the resulting microstructures such as cantilever beams. It was recognized early that these two technologies should be merged in order to make the microstructures smart and devise integrated microsystems with on-chip driving and signal conditioning circuitry - now known as CMOS MEMS or, with the arrival of nanostructures, CMOS NEMS. One way to achieve the merger is the post-processing micro- or nano- machining of finished CMOS wafers, some of which is described in this book. The book introduces this approach based on work carried out at the Physical Electronics Laboratory of ETH Zurich on arrays of cantilever transducers with on-chip driving and signal conditioning circuitry. These cantilevers are familiar from Scanning Probe Microscopy (SPM) and allow the sensitive detection of phys ical quantities such as forces and mass changes. The book is divided into three parts. First, general aspects of cantilever resona tors are introduced, e. g. their resonant behavior and possible driving and sensing mechanisms.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 156 pp. Englisch.

Bestandsnummer des Verk�ufers 9783540431435

Verk�ufer kontaktieren

Diesen Artikel melden

Bibliografische Details

Titel: CMOS Cantilever Sensor Systems
Verlag: Springer Berlin Heidelberg, Springer Berlin Heidelberg Jul 2002
Erscheinungsjahr: 2002
Sprache: Englisch
ISBN-10: 3540431438
ISBN-13: 9783540431435
Einband: Buch
Zustand: Neu
Abmessungen: Breite: 241 mm, H�he: 160 mm, Tiefe: 14 mm
Gewicht: 407 Gramm

�ber diesen Titel

Inhaltsangabe

This book is intended for scientists and engineers in the field of micro- and nano� electro-mechanical systems (MEMS and NEMS) and introduces the development of cantilever-based sensor systems using CMOS-compatible micromachining from the design concepts and simulations to the prototype. It is also a useful resource for researchers on cantilever sensors and resonant sensors in general The reader will become familiar with the potential of the combination of two technological approaches: IC fabrication technology, notably CMOS technology, and silicon micromachining and the resulting microstructures such as cantilever beams. It was recognized early that these two technologies should be merged in order to make the microstructures smart and devise integrated microsystems with on-chip driving and signal conditioning circuitry - now known as CMOS MEMS or, with the arrival of nanostructures, CMOS NEMS. One way to achieve the merger is the post-processing micro- or nano- machining of finished CMOS wafers, some of which is described in this book. The book introduces this approach based on work carried out at the Physical Electronics Laboratory of ETH Zurich on arrays of cantilever transducers with on-chip driving and signal conditioning circuitry. These cantilevers are familiar from Scanning Probe Microscopy (SPM) and allow the sensitive detection of phys� ical quantities such as forces and mass changes. The book is divided into three parts. First, general aspects of cantilever resona� tors are introduced, e. g. their resonant behavior and possible driving and sensing mechanisms.

Von der hinteren Coverseite

This book introduces the use of industrial CMOS processes to produce arrays of nanomechanical cantilever transducers with on-chip driving and signal conditioning circuitry. These cantilevers are familiar from Scanning Probe Microscopy (SPM) and allow the sensitive detection of physical quantities such as forces and mass changes. The book is divided into three parts. First fabrication aspects and the mechanisms of cantilever resonators are introduced. Of the possible driving and sensing mechanisms, electrothermal and magnetic excitation, as well as piezoresistive detection and the use of MOS transistors for the deflection detection are introduced. This is followed by two application examples: The use of resonant cantilevers for the mass-sensitive detection of volatile organic compounds, and force sensor arrays for parallel Scanning Atomic Force Microscopy (AFM) of large areas.

��ber diesen Titel� kann sich auf eine andere Ausgabe dieses Titels beziehen.

Anbieterinformationen

Impressum Thorsten Retsch Buchversand Mimpf2000 Ober�lschnitz 16 95517 Emtmannsberg Deutschland Telefon: 09209-2023188 Email: mimpf2000@online.de USt-ID-Nr.: DE 235096871 Wir f�hren gebrauchte B�cher aus allen Sparten der Literatur

Zur Homepage des Verk�ufers

Unternehmensdaten des Verk�ufers

buchversandmimpf2000
Germany

Gesch�ftsbedingungen und Versandinformationen

Verkaufsbedingungen

Widerrufsbelehrung/ Muster-Widerrufsformular/
Allgemeine Gesch�ftsbedingungen und Kundeninformationen/ Datenschutzerkl�rung

Widerrufsrecht f�r Verbraucher
(Verbraucher ist jede nat�rliche Person, die ein Rechtsgesch�ft zu Zwecken abschlie�t, die �berwiegend weder ihrer gewerblichen noch ihrer selbstst�ndigen beruflichen T�tigkeit zugerechnet werden k�nnen.)

Widerrufsbelehrung

Widerrufsrecht
Sie haben das Recht, binnen 14 Tagen ohne Angabe von Gr�nden diesen Vertrag zu widerrufen.
Die Widerrufsfr...

Mehr Information

Widerrufsbelehrung

Versandbedingungen

Soweit in der Artikelbeschreibung keine andere Frist angegeben ist, erfolgt die Lieferung der Ware innerhalb von 3-5 Werktagen nach Vertragsschluss, bei Vorauszahlung erst nach Eingang des vollst�ndigen Kaufpreises und der Versandkosten. Alle Preise inkl. MwSt.

Versandkosten innerhalb von Deutschland

Versandkosten innerhalb von Deutschland
Bestellmenge	2 bis 7�Werktage	2 bis 6�Werktage
Erster Artikel	EUR 0.00	EUR 3.99

Die Versandzeiten werden von den Verk�uferinnen und Verk�ufern festgelegt. Sie variieren je nach Versanddienstleister und Standort. Sendungen, die den Zoll passieren, k�nnen Verz�gerungen unterliegen. Eventuell anfallende Abgaben oder Geb�hren sind von der K�uferin bzw. dem K�ufer zu tragen. Die Verk�uferin bzw. der Verk�ufer kann Sie bez�glich zus�tzlicher Versandkosten kontaktieren, um einen m�glichen Anstieg der Versandkosten f�r Ihre Artikel auszugleichen.

Impressum & Info zum Verk�ufer