Laser Powder Bed Fusion of Additive Manufacturing Technology - Hardcover

Wang, Di; Yang, Yongqiang; Liu, Yang; Bai, Yuchao; Tan, Chaolin

 
9789819955121: Laser Powder Bed Fusion of Additive Manufacturing Technology
Hardcover
ISBN 10: 9819955122 ISBN 13: 9789819955121
Verlag: Springer, 2023

Inhaltsangabe

This book systematically introduces the powder bed laser melting technology and its application and summarizes the author's team's experience in scientific research, engineering development, and data accumulation in recent 15 years. It includes in-depth theoretical analysis and a lot of engineering experience in equipment debugging, process development, and material testing. The book takes the powder bed laser melting technology as the object and divides the content into 15 chapters. It is used as technical learning materials for researchers and engineering development personnel engaged in metal 3D printing.

Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.

Über die Autorin bzw. den Autor

Di Wang is a professor/doctoral supervisor of South China University of Technology, China, and a visiting scholar of Birmingham University, UK. And he is currently a director/general manager of Laseradd Technology (Guangzhou) Co., Ltd., a member of the National Committee for Standardization of Special Processing Equipment, the executive/co-chairman of the National Forum for Additional Materials Manufacturing for Young Scholars, the secretary-general of the Design Committee of the Branch of Additional Materials Manufacturing of China Mechanical Engineering Society, the vice director of the Guangdong Metal Addition Engineering Technology Center, and the first young member of the Laser Application Branch of China Optical and Electronics Industry Association, Young Editorial Committee of Journal of Materials Engineering and Journal of Aeronautical Materials, High-level Talents of Guangdong Province High-level Special Program, Guangzhou Pearl River Science and Technology Star, Young Reserve Talents of Liwan District.
 
Yongqiang Yang is a professor and a doctoral supervisor of South China University of Technology, China. In 1982, 1987, and 1993, he successively obtained bachelor's, master's, and doctor's degrees in the Department of Mechanical Science, Tianjin University, China. Currently, he is the executive director of China Mechanical Engineering Society Supplementary Manufacturing Branch, the director of Supplementary Manufacturing Design Committee, the vice president of China 3D Printing Technology Alliance, the president of Guangdong Supplementary Manufacturing (3D Printing) Association, the director of Guangdong Metal Supplementary Manufacturing Engineering Research Center, the director of Guangdong 3D Printing Standardization Committee, the director of Guangdong Laser Industry Association, a senior member of American Laser Association (LIA), etc.
 
Yang Liu is an associate professor in Department of Mechanical Engineering, Ningbo University, China. He received his Ph.D. from School of Mechanical and Automotive Engineering, South China University of Technology in 2015. His research interests include laser metal additive manufacturing process, dynamic mechanical properties of the 3D-printed products, crystal plasticity finite element (CPFE) method, etc.
 
Yuchao Bai is an assistant professor/master supervisor in School of Mechanical Engineering and Automation, Harbin Institute of Technology, Shenzhen, Guangdong, China. He received his PhD degree in mechanical engineering from South China University of Technology in 2018. He was a Senior Research Fellow at the Department of Mechanical Engineering, National University of Singapore, Singapore. He has been engaged in the development of additive manufacturing technology for more than 10 years and is the topic editor of the journal Coatings, the author of more than 50 peer-reviewed scientific papers, the Youth Editor of CJME:AMF and Rare Metal Mat. Eng. and was listed inWorld’s Top 2% Scientist Ranking by Stanford University in 2022. He has co-authored 2 books and yielded a number of patents, where 52 were successfully patented by China and Japan. His main research interests include metal additive manufacturing and post-processing, ultra-precision machining, and hybrid manufacturing. 
 
Chaolin Tan is a Senior Scientist at the Singapore Institute of Manufacturing Technology (SIMTech), A*STAR. He received his PhD degree in materials processing engineering in June 2019. He was awarded as an Honorary Research Fellow of the University of Birmingham and Guangzhou Young Talent Researcher in 2019. He was elected as the Fellow of International Association of Advanced Materials (IAAM) and listed as World’s Top 2% Scientist Ranking by Stanford University in 2022. His research experience in Additive Manufacturing (3D printing), has been over 9 years and contributed more than 60 SCI papers, including more than 30SCI journal papers as the lead author. He is on the Editorial Board of Int. J. Mach. Tools Manuf. and Youth Editor of Int. J. Extreme Manuf. and J. Mater. Sci. Technol.

Von der hinteren Coverseite

This book systematically introduces the powder bed laser melting technology and its application and summarizes the author's team's experience in scientific research, engineering development, and data accumulation in recent 15 years. It includes in-depth theoretical analysis and a lot of engineering experience in equipment debugging, process development, and material testing. The book takes the powder bed laser melting technology as the object and divides the content into 15 chapters. It is used as technical learning materials for researchers and engineering development personnel engaged in metal 3D printing.

„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.

Verlag
Springer
Erscheinungsdatum
2023
Sprache
Englisch
ISBN 10 
9819955122
ISBN 13 
9789819955121
Einband
Gebundene Ausgabe
Anzahl der Seiten
304
Kontakt zum Hersteller
ProductSafety@springernature.com
ProductSafety@springernature.com

Poststr. 9
Darmstadt
64293
Deutschland

Weitere beliebte Ausgaben desselben Titels

9789819955152: Laser Powder Bed Fusion of Additive Manufacturing Technology

Vorgestellte Ausgabe

ISBN 10:  9819955157 ISBN 13:  9789819955152
Verlag: Springer, 2024
Softcover