Advances in Materials Processing: Select Proceedings of ICFMMP 2019 (Lecture Notes in Mechanical Engineering) - Hardcover

Dr. Sunpreet Singh is researcher in NUS Nanoscience & Nanotechnology Initiative (NUSNNI). He has received Ph.D in Mechanical Engineering from Guru Nanak Dev Engineering College, Ludhiana, India. His area of research is additive manufacturing and application of 3D printing for development of new biomaterials for clinical applications. He has contributed extensively in additive manufacturing literature with publications appearing in Journal of Manufacturing Processes, Composite Part: B, Rapid Prototyping Journal, Journal of Mechanical Science and Technology, Measurement, International Journal of Advance Manufacturing Technology, and Journal of Cleaner Production. He has authored 10 book chapters and monographs. He is working in joint collaboration with Prof. Seeram Ramakrishna, NUS Nanoscience & Nanotechnology Initiative and Prof. Rupinder Singh, manufacturing research lab, GNDEC, Ludhiana. He is also editor of 3 books- "Current Trends in Bio-manufacturing", “3D Printing in Biomedical Engineering”, and "Biomaterials in Orthopaedics and Bone Regeneration - Design and Synthesis". He is also guest editor of 3 journals- special issue of “Functional Materials and Advanced Manufacturing”, Facta Universitatis, series: Mechanical Engineering (Scopus Indexed), Materials Science Forum (Scopus Indexed), and special issue on “Metrology in Materials and Advanced Manufacturing”, Measurement and Control (SCI indexed). 

Dr. Chander Prakash is Associate Professor in the School of Mechanical Engineering, Lovely Professional University, Jalandhar, India. He has received Ph.D in mechanical engineering from Panjab University, Chandigarh, India. His areas of research are biomaterials, rapid prototyping & 3-D printing, advanced manufacturing, modeling, simulation, and optimization. He has more than 11 years of teaching experience and 6 years of research experience. He has contributed extensively to the world in the titanium and magnesium based implant literature with publications appearing in Surface and Coating Technology, Materials and Manufacturing Processes, Journal of Materials Engineering and Performance, Journal of Mechanical Science and Technology, Nanoscience and Nanotechnology Letters, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. He has authored 60 research papers and 10 book chapters. He is also editor of 3 books: "Current Trends in Bio-manufacturing"; “3D Printing in Biomedical Engineering”;  and "Biomaterials in Orthopaedics and Bone Regeneration - Design and Synthesis". He is also guest editor of 3 journals: special issue of “Functional Materials and Advanced Manufacturing”, Facta Universitatis, Series: Mechanical Engineering (Scopus Indexed), Materials Science Forum (Scopus Indexed), and special issue on “Metrology in Materials and Advanced Manufacturing”, Measurement and Control (SCI indexed).

Prof. SeeramRamakrishna is Co-Director, NUS Nanoscience & Nanotechnology Initiative (NUSNNI). He has received Ph.D form University of Cambridge. He is a global leader in electrospinning and nanostructured materials. Since 2001, Seeram’s team has contributed significantly to the scientific knowledge in basic research, advances in the process and the applications of Nanofibers. His research resulted in ~ 1,000 peer reviewed articles with ~ 70,000 citations and ~ 120 H-index. He has authored 5 books and ~25 book chapters. He has been recognized as a Highly Cited Researcher in Materials Science (www.highlycited.com) for the past four years. Thomson Reuters listed him among the Most Influential Scientific Minds in the World. He has served as NUS vice-president (research strategy), dean of Faculty of Engineering, founding director of NUSNNI, and Bioengineering, founding chair of Global Engineering Deans Council, vice-president of International Federation of Engineering Education Societies, board member of Asia Society for Innovation & Policy. EC/FP7 report lists him among the top four researchers of Singapore. He is recognized as world’s number one in nanofiber technologies. He also generated intellectual property in the form of 20 patents, and licensed technologies to industry and start-ups.  He mentors Singapore based start-ups namely-Biomers International, Insight Bio Ventures, ceEntek, Hyperion Core and Everest Capital.  Moreover he works with companies such as HP, Schlumberger, BASF, Interplex, GE, Mann Hummel, Kaneka, Mitsubishi, Toray, Unitex, GSK, AMT, etc. for value capture in Singapore.

Prof. Grzegorz Krolczyk is Professor in the Opole University of Technology. He is an originator and a Project Manager of OUTech’s new Surface Integrity Laboratory. In his career he has held positions such as: head of unit design and technology, product engineer, production manager, product development engineer and production director. He is the co-author and project leader of a project Innovative, energy-efficient diaphragm flow device of a new generation. He is connected with the mechanical industry, where he managed teams from a few to over a hundred people. His industrial engineering experience was gained while working in a European holding company involved in machining of construction materials and plastic injection, where he was responsible for contacts with companies on technical issues such as quotation and implementation of new products. In professional career he was responsible from the implementation to production of products such as peristaltic pumps, ecological sprayers to spray organic pesticides and many pressure equipment operating e.g. in chemical plants. As a production manager, he was responsible from implementation to production and launching the assembly line for innovative sprayer ultra-low volume spraying system. He is author and co-author of over 80 scientific publications and nearly 20 studies and implementation of industry. The main directions of scientific activity are surface metrology, optimization of geometrical and physical parameters of surface integrity, optimization of production and cutting tool wear analysis in dry machining process of difficult-to-cut materials. He is also editor of various journals and books.