Verwandte Artikel zu Statics and Mechanics of Structures
Inhaltsangabe
The statics and mechanics of structures form a core aspect of civil engineering. This book provides an introduction to the subject, starting from classic hand-calculation types of analysis and gradually advancing to a systematic form suitable for computer implementation. It starts with statically determinate structures in the form of trusses, beams and frames. Instability is discussed in the form of the column problem - both the ideal column and the imperfect column used in actual column design. The theory of statically indeterminate structures is then introduced, and the force and deformation methods are explained and illustrated. An important aspect of the book's approach is the systematic development of the theory in a form suitable for computer implementation using finite elements. This development is supported by two small computer programs, MiniTruss and MiniFrame, which permit static analysis of trusses and frames, as well as linearized stability analysis. The book's final section presents related strength of materials subjects in greater detail; these include stress and strain, failure criteria, and normal and shear stresses in general beam flexure and in beam torsion. The book is well-suited as a textbook for a two-semester introductory course on structures.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Über die Autorin bzw. den Autor
Steen Krenk received his M.Sc. and Ph.D. from the Technical University of Denmark and later the degree of Dr.Tech.from the same institution after studies at Lehigh University. He is professor of Structural Mechanics at the Technical University of Denmark. He has held similar positions at Aalborg University in Denmark and Lund University in Sweden, and visiting appointments at Lehigh University, University of Virginia, University of Waterloo and University of Notre Dame. His research areas include mechanics of structures and materials, computational mechanics and stochastic models for structural loads and safety. In recent years the main area of research has been structural dynamics with special emphasis on time integration techniques, and damping and resonant control of structural vibrations. Several of his research results have found direct application in acoustics, seismology, vibration damping of cables and pedestrian bridges, and in analysis techniques for offshore structures and wind turbines. Jan Hogsberg received his M.Sc. in 2002 and Ph.D. in 2005 from the Technical University of Denmark, where he is currently holding a position as associate professor. His main research areas are mechanics and dynamics of structures, with particular emphasis on the design, calibration and implementation of active and semi-active damping and control concepts for flexible structures.
Von der hinteren Coverseite
The statics and mechanics of structures form a core aspect of civil engineering. This book provides an introduction to the subject, starting from classic hand-calculation types of analysis and gradually advancing to a systematic form suitable for computer implementation. It starts with statically determinate structures in the form of trusses, beams and frames. Instability is discussed in the form of the column problem - both the ideal column and the imperfect column used in actual column design. The theory of statically indeterminate structures is then introduced, and the force and deformation methods are explained and illustrated. An important aspect of the book s approach is the systematic development of the theory in a form suitable for computer implementation using finite elements. This development is supported by two small computer programs, MiniTruss and MiniFrame, which permit static analysis of trusses and frames, as well as linearized stability analysis. The book s final section presents related strength of materials subjects in greater detail; these include stress and strain, failure criteria, and normal and shear stresses in general beam flexure and in beam torsion.
The book is well-suited as a textbook for a two-semester introductory course on structures.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
Neu kaufen
Diesen Artikel anzeigen
EUR 60,35
EUR 7,52 für den Versand von Vereinigtes Königreich nach USA
Versandziele, Kosten & DauerWeitere beliebte Ausgaben desselben Titels
Suchergebnisse für Statics and Mechanics of Structures
Beispielbild für diese ISBN
Statics and Mechanics of Structures
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. pp. 526. Artikel-Nr. 95439950
Anzahl: 4 verfügbar
Foto des Verkäufers
Statics and Mechanics of Structures
Verlag:
Springer Netherlands, Springer Netherlands Apr 2013, 2013
ISBN 10: 9400761120
ISBN 13: 9789400761124
Neu
Hardcover
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Buch. Zustand: Neu. Neuware -The statics and mechanics of structures form a core aspect of civil engineering. This book provides an introduction to the subject, starting from classic hand-calculation types of analysis and gradually advancing to a systematic form suitable for computer implementation. It starts with statically determinate structures in the form of trusses, beams and frames. Instability is discussed in the form of the column problem - both the ideal column and the imperfect column used in actual column design. The theory of statically indeterminate structures is then introduced, and the force and deformation methods are explained and illustrated.An important aspect of the book¿s approach is the systematic development of the theory in a form suitable for computer implementation using finite elements. This development is supported by two small computer programs, MiniTruss and MiniFrame, which permit static analysis of trusses and frames, as well as linearized stability analysis. The book¿s final section presents related strength of materials subjects in greater detail; these include stress and strain, failure criteria, and normal and shear stresses in general beam flexure and in beam torsion.The book is well-suited as a textbook for a two-semester introductory course on structures.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 520 pp. Englisch. Artikel-Nr. 9789400761124
Anzahl: 2 verfügbar
Beispielbild für diese ISBN
Statics and Mechanics of Structures
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Hardcover. Zustand: Brand New. 2013 edition. 526 pages. 9.37x6.14x1.02 inches. In Stock. Artikel-Nr. zk9400761120
Anzahl: 1 verfügbar
Foto des Verkäufers
Statics and Mechanics of Structures
Verlag:
Springer Netherlands, Springer Netherlands, 2013
ISBN 10: 9400761120
ISBN 13: 9789400761124
Neu
Hardcover
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The statics and mechanics of structures form a core aspect of civil engineering. This book provides an introduction to the subject, starting from classic hand-calculation types of analysis and gradually advancing to a systematic form suitable for computer implementation. It starts with statically determinate structures in the form of trusses, beams and frames. Instability is discussed in the form of the column problem - both the ideal column and the imperfect column used in actual column design. The theory of statically indeterminate structures is then introduced, and the force and deformation methods are explained and illustrated. An important aspect of the book s approach is the systematic development of the theory in a form suitable for computer implementation using finite elements. This development is supported by two small computer programs, MiniTruss and MiniFrame, which permit static analysis of trusses and frames, as well as linearized stability analysis. The book s final section presents related strength of materials subjects in greater detail; these include stress and strain, failure criteria, and normal and shear stresses in general beam flexure and in beam torsion.The book is well-suited as a textbook for a two-semester introductory course on structures. Artikel-Nr. 9789400761124
Anzahl: 1 verfügbar