Inhaltsangabe
Electrical discharge machining (EDM) is a non-traditional process that uses the electrical spark discharge to machine electrically conducting materials for geometrically complex shapes or hard materials, which are difficult to machine using a traditional approach. The objective of this work is to study the effect of different electrodes material on the responses of electrical discharge machining. The electrodes material were copper and brass with diameter (15mm) and (40 mm) length used to machine AISI H13 steel at different currents (20, 30 and 40A), Pulse on time (50 ,100 and 150 µs), Gap (1,3 and 6mm) and constant workpiece thickness (4 mm) with is diesel oil. Taguchi method is used to determine the best designe for Nine samples were machined by using electrical discharge machine with voltage (140 V) remains constant during machining.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Über die Autorin bzw. den Autor
Mostafa adel abdullah born in Baghdad, on February 26, 1987. Education: BSc and MSc in Production Engineering from University of Technology, Baghdad in 2009 and 2015 respectively.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
Suchergebnisse für Study The Effect Of Machining Parameter For EDM Process
Foto des Verkäufers
Study The Effect Of Machining Parameter For EDM Process
Verlag:
LAP LAMBERT Academic Publishing, 2018
ISBN 10: 6139946050
ISBN 13: 9786139946051
Neu
Taschenbuch
Anbieter: preigu, Osnabrück, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Study The Effect Of Machining Parameter For EDM Process | Mostafa Adel (u. a.) | Taschenbuch | 64 S. | Englisch | 2018 | LAP LAMBERT Academic Publishing | EAN 9786139946051 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu. Artikel-Nr. 115047762
Neu kaufen
EUR 36,25
EUR 70,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 5 verfügbar
Beispielbild für diese ISBN
Study The Effect Of Machining Parameter For EDM Process
Verlag:
LAP LAMBERT Academic Publishing, 2018
ISBN 10: 6139946050
ISBN 13: 9786139946051
Gebraucht
Softcover
Anbieter: Buchpark, Trebbin, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Zustand: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | Electrical discharge machining (EDM) is a non-traditional process that uses the electrical spark discharge to machine electrically conducting materials for geometrically complex shapes or hard materials, which are difficult to machine using a traditional approach. The objective of this work is to study the effect of different electrodes material on the responses of electrical discharge machining. The electrodes material were copper and brass with diameter (15mm) and (40 mm) length used to machine AISI H13 steel at different currents (20, 30 and 40A), Pulse on time (50 ,100 and 150 µs), Gap (1,3 and 6mm) and constant workpiece thickness (4 mm) with is diesel oil. Taguchi method is used to determine the best designe for Nine samples were machined by using electrical discharge machine with voltage (140 V) remains constant during machining. Artikel-Nr. 33317722/1
Gebraucht kaufen
EUR 20,74
EUR 105,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 3 verfügbar