A comprehensive treatment of current fastening technology including inserts, post-installed anchors, as well as power-actuated fasteners, in both concrete and masonry. The section "Fastenings in Concrete" describes in detail these elements together with their behavior and load-bearing capacities in cracked and uncracked concrete, while also considering the effects of corrosion and fire, as well as earthquake and shock loading. It concludes with an assessment of fastenings, illustrated by numerous examples. The "Fastenings in Masonry" section goes on to deal with several different types of masonry and describes the load bearing characteristics with an assessment of plastic fastenings and injection-molded anchors, including criteria for selecting the correct fastening.Über den Autor:
Rolf Eligehausen, Prof. Dr.-Ing. studied structural engineering at the Technical University Brunswick and gained his doctorate from the University of Stuttgart. Following two years of research at the University of California Berkeley, he became professor for fastenings technology at Otto Graf Institute, University of Stuttgart in 1984. He is a member of numerous national and international expert commissions in the fields of steel-reinforced concrete and fastening technologies and the author of a large number of essays on these topics. Rainer Mallee, Dr.-Ing. studied structural engineering at the Technical University Brunswick and gained his doctorate from the University of Stuttgart. Between 1980 and 1987 he was head of Professor Rehm's engineering company in Munich, before becoming head of development in fastening elements at fischer in Waldachtal. Since 1996 he has been head of research at the fischer group of companies. John F. Silva, MS, SE gained his Master of Civil Engineering at the University of California at Berkeley and is a Structural Engineer. He worked for ca. 10 years in San Francisco at two renowned engineering firms concentrating on inter alia fastenings during earthquakes. He worked in the development centre at HILTI for four years and currently works in their San Francisco offices.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
Buchbeschreibung Ernst W. & Sohn Verlag Feb 2006, 2006. Buch. Buchzustand: Neu. 24x17x cm. Neuware - Das Buch stellt den aktuellen Stand der kompletten Befestigungstechnik für Beton und Mauerwerk mit Einlegeteilen (Ankerschienen, Kopfbolzen), Dübeln (Metallspreizdübel, Hinterschnittdübel, Verbunddübel, Betonschrauben, Kunststoffdübel) und Setzbolzen umfassend dar. Die Befestigungselemente und ihre Wirkungsmechanismen werden ausführlich beschrieben und das Tragverhalten im ungerissenen und gerissenen Beton untersucht. Weiterhin werden das Korrosionsverhalten, das Verhalten bei Brandbeanspruchung sowie bei Erdbeben- und Schockbeanspruchung behandelt. Von besonderer internationaler Aktualität ist die Bemessung gemäß der europäischen und amerikanischen Normung.Praxisorientierte Kriterien zur Auswahl von Befestigungsmitteln und Bemessungsbeispiele runden das Werk zu einem einzigartigen Handbuch ab. A comprehensive treatment of current fastening technology using inserts (anchor channels, headed stud), anchors (metal expansion anchor, undercut anchor, bonded anchor, concrete screw and plastic anchor) as well as power actuated fasteners in concrete. It describes in detail the fastening elements as well as their effects and load-bearing capacities in cracked and non-cracked concrete. It further focuses on corrosion behaviour, fire resistance and characteristics with earthquakes and shocks. It finishes off with the design of fastenings according to the European Technical Approval Guideline (ETAG 001), the Final Draft of the CEN Technical Specification Design of fastenings for use in concrete and the American Standards ACI 318-05, Appendix D and ACI 349-01, Appendix B. 391 pp. Englisch. Artikel-Nr. 9783433011430