A Second-Order ΣΔ ADC Using Sputtered IGZO TFTs: Adc Using Sputtered Igzo Tfts With Multilayer Dielectric (SpringerBriefs in Electrical and Computer Engineering) - Softcover

Buch 108 von 209: SpringerBriefs in Electrical and Computer Engineering

Correia, Ana Paula Pinto Pinto

 
9783319271903: A Second-Order ΣΔ ADC Using Sputtered IGZO TFTs: Adc Using Sputtered Igzo Tfts With Multilayer Dielectric (SpringerBriefs in Electrical and Computer Engineering)
Softcover
ISBN 10: 3319271903 ISBN 13: 9783319271903
Verlag: Springer, 2016

Inhaltsangabe

This books discusses the design, electrical simulation and layout of a 2nd-order ∑∆ analog-to-digital converter (ADC), using oxide thin-film transistors (TFTs) technology. The authors provide a unified view of materials science and electronics engineering, in order to guide readers from both fields through key topics. To accomplish this goal, background regarding materials, device physics, characterization techniques, circuit design and layout is given together with a detailed discussion of experimental data. The final simulation results clearly demonstrate the potential of the proposed circuit-level techniques, which enables the implementation of robust and energy efficient ADCs based on oxide TFTs, for moderate resolutions and conversion-rates.

Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.

Über die Autorin bzw. den Autor

João Goes graduated from IST, Lisbon, in ECE, in 1992. He obtained the M.Sc. & the Ph.D. degrees in ECE, respectively, in 1996 & 2000, from the Tech. Unive. of Lisbon & the ‘Agregado’ degree ('Habilitation' degree) in 2012 from the UNL.

He has been with the DEE of the FCT of UNL, since April 1998 where he is currently an Asso. Pro. &, since July 2012, he has been heading the Dept. From 1998 he has been a Senior Researcher at the CTS at UNINOVA & responsible for the Micro & Nanoelectronics research Unit. In Nov. 2012 he became the Director of CTS.

 

Von der hinteren Coverseite

This book discusses the design, electrical simulation and layout of a 2nd-order ∑∆ analog-to-digital converter (ADC), using oxide thin-film transistors (TFTs) technology. The authors provide a unified view of materials science and electronics engineering, in order to guide readers from both fields through key topics. To accomplish this goal, background regarding materials, device physics, characterization techniques, circuit design and layout is given together with a detailed discussion of experimental data. The final simulation results clearly demonstrate the potential of the proposed circuit-level techniques, which enables the implementation of robust and energy efficient ADCs based on oxide TFTs, for moderate resolutions and conversion-rates.

 
  • Combines materials science and electronics engineering in the same book, making it possible to obtain a general overview, from TFTs production and characterization to their integration in relatively complex circuits; 
  • Adapts an a-Si:H TFT RPI model to simulate the behavior of these devices with good fitting to experimental data;
  • Describes the implementation of a 2nd-order ∑∆ ADC using oxide TFTs.

„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.

Verlag
Springer
Erscheinungsdatum
2016
Sprache
Englisch
ISBN 10 
3319271903
ISBN 13 
9783319271903
Einband
Taschenbuch
Auflage
1
Anzahl der Seiten
92
Kontakt zum Hersteller
ProductSafety@springernature.com
ProductSafety@springernature.com

Poststr. 9
Darmstadt
64293
Deutschland