Book by Muttoni Aurello Schwartz Joseph Thrlimann Bruno
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
17 2 STRESS FIELDS FOR SIMPLE STRUCTURES 2. 1 INTRODUCTION In this chapter the behavior and strength of simple structures made of rein forced or prestressed concrete is investigated with the aid of stress fields. In particular, the webs and flanges of beams, simple walls, brackets, bracing beams and joints of frames are investigated. By this means, the majority of design cases are already covered. In reality, all structural components are three-dimensional. Here, however, components are considered either directly as two-dimensional plate elements (i. e. the plane stress condition with no variation of stress over the thickness of the element) or they are subdivided into several plates. Since two-dimensional structural elements are statically redundant, it is pOSSible for a particular loading to be in equilibrium with many (theoretically an infinite number of) stress states. If the lower bound method of the theory of plasticity is employed, then an admissible stress field or any combination of such stress fields may be selected. In chapter 4 it is shown that this method is suitable for the design of reinforced concrete structures, and the consequence of the choice of the final structural system on the structural behavior is dealt with in detail. The first cases of the use of this method date back to Ritter  and Morsch , who already at the beginning of the century investigated the resultants of the internal stresses by means of truss models.Reseña del editor:
The book presents a unified approach to the design and detailing of reinforced and prestressed concrete structures. Simple and, above all, clear models in the form of stress fields, consistently based on the theory of plasticity are developed to determine the statical action and the strength. These models are then used to design and detail the structural components and connections. Practical experience as well as fifty years of extensive testing have demonstrated that the theory of plasticity provides a rational, logical, consistent and simple method for investigating the statical behaviour and strength of reinforced and prestressed concrete structures. Throughout the text references are made to the pertinent literature. Also available in German
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.