Verwandte Artikel zu Extruder Processing: Comparison of Single- and Twin-Screw...

Extruder Processing: Comparison of Single- and Twin-Screw Extruders for Optimal Solids Conveying, Melting, and Mixing - Hardcover

Andersen, Paul G.; Campbell, Gregory A.

 
9781569908631: Extruder Processing: Comparison of Single- and Twin-Screw Extruders for Optimal Solids Conveying, Melting, and Mixing
Hardcover
ISBN 10: 156990863X ISBN 13: 9781569908631
Verlag: Carl Hanser Verlag GmbH & Co. KG, 2022

Inhaltsangabe

Single-screw or twin-screw extruder? When the need to produce a homogeneous polymer melt occurs in the industrial environment, both product attributes and equipment cost must be evaluated. For many applications both the single and twin-screw extruder will produce the desired homogeneous melt needed to form the product through an extrusion die. Some applications such as dispersive mixing of solids in a polymer matrix are best accomplished in a twin-screw extruder. On the other hand, applications involving chemical reactions, color concentrate distributive mixing, and in line polymer-polymer distributive mixing can be accomplished with either device.

However, for the same production rate, twin-screw extruders are generally more expensive than single-screw extruders with a diameter less than 200 mm. Therefore, a thorough understanding is needed for the concepts of solids conveying, melting, and mixing for the two types of extruders to make appropriate process acquisition decisions. This book covers engineering and technology concepts that should aid the practitioner in comparing these two types of extrusion equipment relative to process requirements.

Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.

Über die Autorinnen und Autoren

Paul G. Andersen, Ph.D., is Process Technology Consultant at Coperion Corporation, Ramsey, NJ, USA. He was previously Director, Process Technology at Coperion, a position he held until 2016. In 2009/2010, he was President of the Society of Plastics Engineers (SPE).

Gregory A. Campbell, Ph.D., is Chief Technical Officer at Castle Associates, Jonesport, ME. He was previously professor and departmental chair of chemical engineeering at Clarkson University, NY. He formerly directed a research group at GM Research and managed polymer fabrication at Mobil Chemical Research. He is a Fellow and former Extrusion Board Member of the Society of Plastics Engineers (SPE).

„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.

Verlag
Carl Hanser Verlag GmbH & Co. KG
Erscheinungsdatum
2022
Sprache
Englisch
ISBN 10 
156990863X
ISBN 13 
9781569908631
Einband
Gebundene Ausgabe
Auflage
1
Anzahl der Seiten
234
Kontakt zum Hersteller
Carl Hanser Verlag GmbH & Co.KG
info@hanser.de

Vilshofener Straße 10
München
81679
Deutschland