Construction and Test of A 1 1-2 Inch Centrifugal Pump (Classic Reprint) - Softcover

Inhaltsangabe

Excerpt from Construction and Test of A 1 1-2 Inch Centrifugal Pump

Description OF pump tested was a single stage centrifugal pump with an impeller eight inches in diameter. The impeller was made of bronze, while the other parts of the machine, with the exception of the shaft, were of cast iron. The impeller or rotor carried four vanes of the open type and was finished all over. The water entered the pump at the center of one side, and leaving the periphery of the impeller, passed into the volute or outer cas1ng, and from thence out through the vertical discharge pipe. The water from the discharge pipe passed through a weir box into a tank from which the suction pipe again.

About the Publisher

Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com

This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.

Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.